ISO 216
ISO 216 sizes
(mm × mm)| A Series |
|---|
| A0 | 841 × 1189 |
| A1 | 594 × 841 |
| A2 | 420 × 594 |
| A3 | 297 × 420 |
| A4 | 210 × 297 |
| A5 | 148 × 210 |
| A6 | 105 × 148 |
| A7 | 74 × 105 |
| A8 | 52 × 74 |
| A9 | 37 × 52 |
| A10 | 26 × 37 |
| B Series |
|---|
| B0 | 1000 × 1414 |
| B1 | 707 × 1000 |
| B2 | 500 × 707 |
| B3 | 353 × 500 |
| B4 | 250 × 353 |
| B5 | 176 × 250 |
| B6 | 125 × 176 |
| B7 | 88 × 125 |
| B8 | 62 × 88 |
| B9 | 44 × 62 |
| B10 | 31 × 44 |
| C Series |
|---|
| C0 | 917 × 1297 |
| C1 | 648 × 917 |
| C2 | 458 × 648 |
| C3 | 324 × 458 |
| C4 | 229 × 324 |
| C5 | 162 × 229 |
| C6 | 114 × 162 |
| C7/6 | 81 × 162 |
| C7 | 81 × 114 |
| C8 | 57 × 81 |
| C9 | 40 × 57 |
| C10 | 28 × 40 |
| DL | 110 × 220 |
ISO 216 specifies
international standard (ISO)
paper sizes, used in most countries in the world today. It is the standard which defines the well-known
A4 paper size.
|
A comparison of different A paper sizes |
The standard was originally adopted by
DIN (as
DIN 476) in
Germany in
1922, although some of the formats contained therein were independently invented in
France during its revolution and later forgotten.
ISO 216 defines two series of paper sizes: A and B. There is also a C series for envelopes, defined in
ISO 269.
Paper in the A series format has a 1:√2 aspect ratio, though this is rounded to the nearest millimetre. A0 is defined so that it has an area of 1
m², prior to the above mentioned rounding. Successive paper sizes in the series A1, A2, A3, etc., are defined by halving the preceding paper size parallel to its shorter side, again prior to rounding. The most frequently used paper size is A4, which is 210 × 297 mm.
The B series formats are
geometric means between the A series format with the same number and the A series format with one lower number. For example, B1 is a geometric mean between A1 and A0. The sides of B0 are 1 m to √2 m.
There is also an incompatible Japanese B series defined by the
JIS. The lengths of JIS B series paper are approximately 1.22 times those of A-series paper.
The C series formats are geometric means between the B series format with the same number and the A series format with the same number, e.g. C2 is the geometric mean between B2 and A2. The C series formats are used mainly for envelopes. An A4 page will fit into a C4 envelope. If you fold the A4 page so that it is A5 in size, it will fit in a C5 envelope and so on.
Prior to the adoption of ISO 216, many different paper formats were used internationally. These formats did not fit into a coherent system and were defined in terms of non-metric units. The ISO 216 formats are organized around the ratio 1:√2; two sheets next to each other together have the same ratio, sideways. This simplifies copying two A4 sheets in reduced size on one, and copying an A4 sheet in magnified size on an A3 sheet or copying half an A4 sheet in magnified size on an A4 sheet. The principal countries not generally using the ISO paper sizes are the
United States of America and
Canada, which use the
Letter,
Legal, and
Executive system. (Canada uses a P-series of sizes, which are the American paper sizes rounded to metric dimensions.)
Rectangular sheets of paper with the ratio 1:√2 are popular in
paper folding, where they are sometimes called "A4 rectangles" or "silver rectangles".[
1] Confusingly, "silver rectangle" can also refer to a rectangle in the proportion 1:(1+√2), known as the
silver ratio.
*
International standard paper sizes: ISO 216 details and rationale
