Risc PC
|
An Acorn Risc PC 600 with 2 case slices, 3.5" disk drive and DVD-ROM drive. |
The
Risc PC (codenamed
Medusa) was
Acorn Computers Ltd's next generation
RISC OS/
Acorn RISC Machine computer, launched in
1994, which superseded the
Acorn Archimedes.
Like the Archimedes, the Risc PC continued the practice of having the RISC OS
operating system in a
ROM module. Risc PC augmented the ROM-based core OS with a disk-based directory structure containing configuration information, and some applications which had previously been kept in ROM.
*
Memory type:
SIMM, 2 slots, supporting a maximum memory size of 256 MB.
*
Video subsystem: VIDC20 controller, with optional dual-port VRAM up to 2 MB.
*
Expansion:
Eurocard-sized
Podule support in common with Archimedes-series machines. The Risc PC also offers DMA support in the first two podules on the bus.
*
Operating System: RISC OS 3.5 (Risc PC 600), RISC OS 3.6 (Risc PC 700), RISC OS 3.7 (StrongARM Risc PC). RISC OS 4 is available as a replacement for the Acorn-implemented versions which came fitted as standard.
*
Case: Designed by industrial designer
Allen Boothroyd of Cambridge Product Design (designer of the BBC Micro case). Custom plastic-based design with a novel 'slice' feature which allows extra case modules to be added to increase internal expansion space. Each slice adds 2 podule bays at the rear, and two drive bays (one 3.5 inch, one 5.25 inch) at the front, covered by a retractable flap to hide cosmetic inconsistencies in hue. The inside of the case is sprayed with nickel paint to meet electromagnetic and radio emissions regulations.
*
Ports: Serial, Parallel, PS/2 keyboard, Acorn mouse, headphone audio out,
HD15 VGA, network (optional).
*
CPU: Dual-processor slots, accepting the following chips on a special
daughterboard: ARM6 at 30 MHz or 33 MHz, ARM7 at 40 MHz, StrongARM at 203 MHz, 233 MHz or 300 MHz+. 486 and 586-based co-processors at up to 133 MHz, and
DSP chips (third party) were also available. An "Hydra" multi-processor development system from Simtec allowing and extra 4x ARM6 or ARM7 CPU cards, mainly using the Linux OS.
*
Dimensions: 117 (182 two centre-sections) x 355 x 384 mm (HxWxD).
1994 - Risc PC 600 launched, featuring a 30 MHz ARM6 CPU.
1995 - ARM7 CPU upgrade and Risc PC 700 model launched.
1996 - StrongARM CPU upgrade released, offering a fivefold increase in raw processing power compared to the ARM7 used in the previous high-end machines.
2000 - In May,
Castle Technology revealed the Kinetic Risc PC range which included a faster processor card with onboard memory.[
1]
2001 - Viewfinder Podule, AGP adapter allows the use of IBM P.C. clone AGP graphics cards (e.g. an range of ATI Rage and Radeon).
Acorn set about designing the
Risc PC 2 - a design with a 64 MHz front side bus,
PCI slots, and a yellow-coloured
NLX form-factor case. Slated for release in late
1998, the project was canned just before completion. Only two prototypes were ever built, and were shown at the RISC OS 2001 show in
Berkshire, England; the remaining cases were sold off as collector's items, without the computer itself.
Variants of the Risc PC design are still sold today, but Risc PCs have reached the end of their production cycle with the advent of RISC OS computers based around other ARM processors machines such as
*
Iyonix PC based around the
Intel XScale ARM processor and PCI
bus.
*
A9Home based around the
Samsung S3C2440 ARM Processor
Second-hand Risc PCs command very high prices relative to
PCs of similar age and specifications. Significantly better performance has been pulled out of the aged Risc PC design by using the newer 202 (and later 233) MHz StrongARM CPU, using third-party
video cards,
overclocking, and having specially-designed CPU cards with
RAM located upon them to sidestep the speed bottleneck of the slow system bus.
The
front side bus is usually recognised as being the most significant fault of the computer; and the arrival of the (five times faster)
StrongARM processor in
1996 meant that the Risc PC had a
CPU vastly faster than that for which the computer had been designed. Acorn had originally expected ARM CPUs to progress from the 30 MHz ARM6 to the 40 MHz ARM7, and then onto the ARM8 cores, which at the time were clocked at around 50-80 MHz.
*
BBC Micro ancestor.
*
Acorn Archimedes direct predecessor
*
Acorn Computers Ltd*
RISC OS*
Advantage six reveal A9Home to the press *
Castle reveal Kinetic Risc PC to the press*
Risc PC 10th Birthday*
Risc PC production ceases*
Castle bids farewell to Risc PC
