Expert: Srini Nagarajan - 5/9/2005

Question
Would like to know if in any case, my SQL server is in heavy load, is there any chance that the connection from my script will failed?

Will this fail under heavy load :-
Create Object
Open Connection
Execute SQL command

Is there any commands which will improve the robustness of the script? Example codes which will make sure commands that failed will retry a few times before ending up in an error.

Answer
Hi

Sorry for the delay in reply!

in .net it handles the "connection pooling"

Here is the good article about connection pooling

Opening a database connection is a resource intensive and time consuming operation. Connection pooling increases the performance of Web applications by reusing active database connections instead of creating a new connection with every request. Connection pool manager maintains a pool of open database connections. When a new connection requests come in, the pool manager checks if the pool contains any unused connections and returns one if available. If all connections currently in the pool are busy and the maximum pool size has not been reached, the new connection is created and added to the pool. When the pool reaches its maximum size all new connection requests are being queued up until a connection in the pool becomes available or the connection attempt times out.

Connection pooling behavior is controlled by the connection string parameters. The following are four parameters that control most of the connection pooling behavior:


Connect Timeout - controls the wait period in seconds when a new connection is requested, if this timeout expires, an exception will be thrown. Default is 15 seconds.
Max Pool Size - specifies the maximum size of your connection pool. Default is 100. Most Web sites do not use more than 40 connections under the heaviest load but it depends on how long your database operations take to complete.
Min Pool Size - initial number of connections that will be added to the pool upon its creation. Default is zero; however, you may chose to set this to a small number such as 5 if your application needs consistent response times even after it was idle for hours. In this case the first user requests won't have to wait for those database connections to establish.
Pooling - controls if your connection pooling on or off. Default as you may've guessed is true. Read on to see when you may use Pooling=false setting.
Common Problems and Resolutions

Connection pooling problems are almost always caused by a "connection leak" - a condition where your application does not close its database connections correctly and consistently. When you "leak" connections, they remain open until the garbage collector (GC) closes them for you by calling their Dispose method. Unlike old ADO, ADO.NET requires you to manually close your database connections as soon as you're done with them. If you think of relying on connection objects to go out of scope, think again. It may take hours until GC collects them. In the mean time your app may be dead in the water, greeting your users or support personnel with something like this:

Exception: System.InvalidOperationException Message: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Source: System.Data at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) at System.Data.SqlClient.SqlConnection.Open() ...


Exception: System.InvalidOperationException
Message: Timeout expired.  The timeout period elapsed prior to obtaining a connection from the pool.  This may have occurred because all pooled connections were in use and max pool size was reached.
Source: System.Data

at  System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
  at System.Data.SqlClient.SqlConnection.Open()

Closing your connections

When you intend to close your database connection, you want to make sure that you are really closing it. The following code looks fine yet causes a connection leak:


    SqlConnection conn = new SqlConnection(myConnectionString);

     conn.Open();

     doSomething();

     conn.Close();                 

If doSomething() throws an exception - conn will never get explicitly closed. Here is how this can be corrected:


    SqlConnection conn = new SqlConnection(myConnectionString);

     try

     {

           conn.Open();

           doSomething(conn);

     }

     finally

{

           conn.Close();                 

     }

or


    using (SqlConnection conn = new SqlConnection(myConnectionString))

     {

           conn.Open();

           doSomething(conn);

     }

Did you notice that in the first example we called conn.Close() explicitly while in the second one we make the compiler generate an (implicit) call to conn.Dispose() immediately following the using block? The C# using block guarantees that the Dispose method is called on the subject of the using clause immediately after the block ends. Close and Dispose methods of Connection object are equivalent. Neither one gives you any specific advantages over the other.

When returning a connection from a class method - make sure you cache it locally and call its Close method. The following code will leak a connection:


OleDbCommand cmd new OleDbCommand(myUpdateQuery, getConnection());

     intres = cmd.ExecuteNonQuery();

    getConnection().Close(); // The connection returned from the first call to getConnection() is not being closed. Instead of closing your connection, this line creates a new one and tries to close it.


If you use SqlDataReader, OleDbDataReader, etc., close them. Even though closing the connection itself seems to do the trick, put in the extra effort to close your data reader objects explicitly when you use them.

Last but not the least, never Close or Dispose your connection or any other managed object in the class destructor or your Finalize method. This not only has no value in closing your connections but also interferes with the garbage collector and may cause errors. For more information see http://msdn.microsoft.com/library/en-us/cpguide/html/cpconprogrammingessentialsf...

Testing your changes

The only way to know the effect of your changes on connection pooling behavior is to load-test your application. If you have existing unit tests - use them. Running your unit tests repeatedly in a loop may create a fair bit of stress on application. If you don't, use the Web load testing tool. There are plenty of commercial load testing tools on the market. If you prefer freeware, consider OpenSTA available at www.opensta.org. All you need to setup your load test is to install the tool, bring up your Web application and click your way through. OpenSTA will record your HTTP requests into test scenarios that you can run as part of your load test.

Knowing that your application crashes under the load doesn't often help to locate the problem. If the app crashes fairly quickly, all you may need to do is run several load tests - one for each module and see which one has a problem. However, if it takes hours to crash you will have to take a closer look.

Monitoring connection pooling behavior

Most of the time you just need to know if your application manages to stay within the size of its connection pool. If the load doesn't change, but the number of connections constantly creep even after the initial "warm-up" period, you are most likely dealing with a connection leak. The easiest way to monitor the number of database connections is by using the Performance Monitor available under Administrative tools on most Windows installations. If you are running SQL Server, add SQL Server General Statistics -> User Connections performance counter (The counter is available on the SQL Server machine so you may need to put its name or IP address into the Select Counters From Computer box). The other way to monitor the number of database connections is by querying your DBMS. For example, on SQL Server run:

EXEC SP_WHO

Or on Oracle, run:

SELECT * FROM V$SESSION WHERE PROGRAM IS NOT NULL

.NET CLR Data performance counters

In documentation you may run into .Net CLR Data performance counters. They are great if you know what they can and cannot do. Keep in mind that they do not always reset properly. The following KB article sheds some light on the problem but in my opinion does not cover all the issues: http://support.microsoft.com/default.aspx?scid=kb;en-us;314429 Another thing to keep in mind is that IIS unloads app domains under stress so don't be surprised when your number of database connections has dropped to zero while your min pool size is five!

Short term fixes

What if you discovered the connection pooling issue in production and you cannot take it offline to troubleshoot? Turn pooling off. Even though your app will take a performance hit, it shouldn't crash! Your memory footprint will also grow. What if it doesn't crash all that often, and you don't want to take a performance hit? Try this:


conn = new SqlConnection();

try

{

 conn.ConnectionString = "integrated security=SSPI;SERVER=YOUR_SERVER;DATABASE=YOUR_DB_NAME;Min Pool Size=5;Max Pool Size=60;Connect Timeout=2;";     // Notice Connection Timeout set to only two seconds!

 conn.Open();

}

catch(Exception)

{

 if (conn.State != ConnectionState.Closed) conn.Close();

 conn.ConnectionString = "integrated security=SSPI;SERVER=YOUR_SERVER;DATABASE=YOUR_DB_NAME;Pooling=false;Connect Timeout=45;";

 conn.Open();

If I fail to open a pooled connection within two seconds, I am trying to open a non-pooled connection. This introduces a two second delay when no pooled connections are available, but if your connection leak doesn't show most of the time, this is a good steam valve.