You are here:
- Home
- Sports
- NASCAR Racing
- Auto Racing
Auto Racing/Questions
| Subject | Date Asked | Expert |
| Ignition distributor | 8/18/2011 | Dan Liddy |
| Q: I read in a magazine recently that the ultimate distributor for tuning racing engines (gasoline) do ... A: I'm a little vague on this myself. The vacuum advance works to gradually advance timing as the ... | ||
| CASTER ON HONDA | 8/1/2011 | Dan Liddy |
| Q: i have a honda crx stock car, 1/3 mile oval. i was checking the caster and the wheelbase front front ... A: I strongly recommend you get a book, "How To Make Your Car Handle" by Fred Puhn It's a bit dated but ... | ||
| Engine build | 8/1/2011 | Dan Liddy |
| Q: I am an amateur racing driver, driving a Mini Cooper 1275 cc, just for pleasure. I have been ... A: If you must use a wrench or spanner to turn the engine, it would probably be wise to take a good ... | ||
| rally career? | 7/30/2011 | Dan Liddy |
| Q: I am 20yrs old and very interested in starting a career in rally racing. I am attending UTI now and ... A: Yes, Though I know almost nothing about rally, I do know that it is more popular in the north than ... | ||
| 4 cylinder class | 7/25/2011 | Dan Liddy |
| Q: I have an 87 honda prelude 2.0 si we are suppose to be a stock class that races on dirt but there ... A: The porting and polishing was probably a waste of time and money. Some work on a flow bench might ... | ||
| Engine starting | 7/22/2011 | Dan Liddy |
| Q: I find difficulty starting my first ever self-built racing engine, to be installed into a British ... A: I'm going to forward your question to a friend with years of experience with Mini's and Sprites. My ... | ||
| f1 vs car | 6/26/2011 | Dan Liddy |
| Q: new ariel atom v8 500 vs modern f1 car in a quarter mile drag race (pure acceleration) thank you ... A: Please ! I work on race cars, I drive race cars. I teach people how to drive race cars, and how to ... | ||
| neon fuel system | 6/5/2011 | Dan Liddy |
| Q: building a neon mini stock. It is a 95 with a 2.0 sohc and i have the cage done but trying to figure ... A: I don't know WHY you'd want to use the stock pump, and it would be quite difficult to mount. Your ... | ||
| Rally Car Driving Career | 6/3/2011 | Dan Liddy |
| Q: I am 15 and interested in a career in rally car driving. I love driving at quick speeds, but the ... A: I don't know where you live but if you're in the united States you can join the Sports Car Club of ... | ||
| suspensions | 5/23/2011 | Dan Liddy |
| Q: hey... i am tryin to learn about the rocker arm suspension system .. but unfortunately am unable to ... A: The one I mention above is very good. There's another series of books, one of them is entitled ... | ||
| suspensions | 5/22/2011 | Dan Liddy |
| Q: hey... i am tryin to learn about the rocker arm suspension system .. but unfortunately am unable to ... A: I don't know anything about a pull rod suspension. The rocker arm system transfers the forces ... | ||
| 36 and I want to start racing | 5/22/2011 | Dan Liddy |
| Q: I came across this site and your contact details while browsing for information on whether or not I ... A: A challenging question for sure ! Frankly, your chances of landing a professional career are quite ... | ||
| Rear end torque | 5/14/2011 | John Quarles |
| Q: what is it about drag racing torque thats makes the front end lift off the ground when it takes off. ... A: Sorry, but your photo did not transfer. Feel free to email it to jgquarles@yahoo.com Several ... | ||
| CAD programs | 5/14/2011 | John Quarles |
| Q: Hey, I was just wondering if there are any quality CAD programs out there that deal with with ... A: Sure ther are many. Most of them are reffered to as Computationa Fluid Dynamics, or CFD for short. ... | ||
| Metal work | 5/6/2011 | Dan Liddy |
| Q: Hey Dan, I My Name is Dave Siegert. I have been in racing for 25 years. I have built over 500 cars ... A: Welcome to Florida !! I'd suggest advertising in Circle Track, the one tech magazine in the world ... | ||
| Rear end torque | 5/5/2011 | John Quarles |
| Q: what is it about drag racing torque thats makes the front end lift off the ground when it takes off. ... A: Gene, I am assuming that we are still talking about Prostock 1/4 mile dragsters and not NASCAR. ... | ||
| suspension setup for Nissan 240SX | 5/4/2011 | Dan Liddy |
| Q: I race a 1/4 mile banked oval and this year my car is a Nissan 240SX. I am in a stock class with no ... A: You can change the weight BIAS toward the LR by RAISING the LR, Same for the LF Usually though you ... | ||
| suspension setup for Nissan 240SX | 5/4/2011 | Dan Liddy |
| Q: I race a 1/4 mile banked oval and this year my car is a Nissan 240SX. I am in a stock class with no ... A: Wedge: Try raising the LR a little with shims under the strut cartridge. And I think I would try ... | ||
| Car set up for a street stock race car | 5/3/2011 | Dan Liddy |
| Q: I have been in the mind jumbling rock and a hard place in trying to get my car to handle better on ... A: If you are running both directions, you need the negative camber to be balanced, the same on both ... | ||
| coil | 5/3/2011 | Dan Liddy |
| Q: This is not about racing but about the "science" behind ignition systems. Regular auto repair people ... A: Well I have a gadget you can get at most parts houses, a "spark checker" that hooks to a plug wire ... | ||
| Application of Stats | 5/2/2011 | John Quarles |
| Q: I always see people inserting different stats into their computers like wind speed and track ... A: Hailey, The answer to your question is much more complicated than most might think. At this point I ... | ||
| coil | 5/2/2011 | Dan Liddy |
| Q: This is not about racing but about the "science" behind ignition systems. Regular auto repair people ... A: OK please don't give negative feedback for this answer, I'm no electrical whiz kid either. MY ... | ||
| Driver/Sponsor Agreement | 4/21/2011 | Dan Liddy |
| Q: Dan, We are moving up in divisions at Lake Erie Speedway. In doing so, we needed to get sponsors ... A: I Googled "auto racing sponsorship" and got this list of sources: <<http://www.google.com/search ... | ||
| How Do I Find A Place In Race Teams | 4/6/2011 | Dan Liddy |
| Q: I would really appreciate your honest answer to my question. I am a 24 yr old Automobile Engineer ... A: I have no idea. Hiring practices vary from company to company. Just finding a job in this economy is ... | ||
| How Do I Find A Place In Race Teams | 4/6/2011 | Dan Liddy |
| Q: I would really appreciate your honest answer to my question. I am a 24 yr old Automobile Engineer ... A: I believe it would be best if you were to move to England, Germany, Italy , or the USA and to a city ... | ||
| Career on technical side of racing | 4/1/2011 | Dan Liddy |
| Q: I am a mechanical Engineer. Very much interested in all the mechanical work involved in building and ... A: OK, if you are SERIOUS, you probably should move to Mooresville, NC. This is where the bulk of the ... | ||
| slave cylinder | 4/1/2011 | Matt Lyons |
| Q: I have a 2000 pontiac trans am 6 speed transmission the problem im having i think might be the slave ... A: Sounds like you have a case of the classic mixed matched parts! I would get the correct slave ... | ||
| nissan sr20 det gearbox problems | 3/27/2011 | Dan Liddy |
| Q: i recently purchased a 1998 nissan sentra sti modified for club racing at our local track.I used to ... A: I'm not sure what's causing your problem with 3rd. & 4th. gears, but I think if you send new ones ... | ||
| Converting from leal springs | 3/26/2011 | john mazio |
| Q: my question is; what is the basic starting point towards converting a 92 s10's rear axil/ suspension ... A: ZACTLY! BUY THE KIT (THEY HAVE A STREET KIT THAT ELMINATES THE LOWER ADJUSTMENT HOLE IN THE FRONT ... | ||
| Nostalgia | 3/22/2011 | Dan Liddy |
| Q: More of a comment. I really enjoyed your response to tr6 autocross tires. Took me back. My sister ... A: I was lucky enough to meet Bob Tulius a few times. He's spoken at our Annual Awards Banquets twice ... | ||
| Rear end torque | 3/18/2011 | John Quarles |
| Q: what is it about drag racing torque thats makes the front end lift off the ground when it takes off. ... A: Gene, My apoligies for being so late in answering. Let's see if I can explain the physics behind ... | ||
| Tire size and wheel off set | 3/18/2011 | Matt Lyons |
| Q: as far as aerodynamics are concerned, how does one determine the best rim & tire offset and ... A: Basically rear wheel offset doesn't really affect aerodynamics. You need to check state and local ... | ||
| Converting from leal springs | 3/18/2011 | john mazio |
| Q: my question is; what is the basic starting point towards converting a 92 s10's rear axil/ suspension ... A: THE BEST THING IF YOU WANT A COIL SPRING RACE TYPE SUSPENSION AND BIG TIRES OR SLICKS IS TO GO TO ... | ||
| Older Cam Dynamics Cam | 3/14/2011 | Dan Liddy |
| Q: Dan I recently purchased a pristine Cam Dynamics Cam and was told that it was a solid roller for the ... A: You're probably going to get your best answer from Cam Dynamics themselves. And it may require that ... | ||
| How to start a racing career | 2/11/2011 | Dan Liddy |
| Q: my name is Chris And I'm 18 living in the snowy upstate NY. I'm still in high school and have had a ... A: Start with Go Karts, join World Karting Association (Google it!) and find the tracks close to you . ... | ||
| racing | 1/31/2011 | Dan Liddy |
| Q: but the thing is that is it very important to have an mechanical engineering degrees to become a ... A: (getting into racing ) Start with Go Karts, join World Karting Association (Google it!) and find ... | ||
| learning to race | 1/30/2011 | Dan Liddy |
| Q: My 15 year old son is interested in learning to race cars but has no license. Is there a somewhere ... A: He can start with Go Karts immediately, join World Karting Association (Google it!) and find the ... | ||
| racing | 1/29/2011 | Dan Liddy |
| Q: but the thing is that is it very important to have an mechanical engineering degrees to become a ... A: If you wish to become a professional race driver, a very good understanding of mechanics (meaning ... | ||
| Starting from less than scratch...A dream | 1/16/2011 | Dan Liddy |
| Q: I have have had a yearning to drive before i even stepped behind a wheel. Now i feel like my home is ... A: Go to Google, find SCCA.org. Find their address in Topeka, Go there and ask them. Other than ... | ||
| Getting started in the world of Professional Racing | 1/10/2011 | Dan Liddy |
| Q: My name is Christopher and I have been living in the United States for one year now, originally from ... A: Start with Go Karts, join World Karting Association (Google it!) and find the tracks close to you . ... | ||
Page: Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next All
Dan Liddy
Top Expert on this page
Expertise
Anything concerning race cars, 20 years competition experience, Senior Competition Driver Instructor , car builder, mechanic, welding, fabrication, tuning , engine modifications, set up, suspension design. Specializing in Datsun/Nissan products. Please submit questions about RACE CARS ONLY. No street cars, no video game scenarios Thank you.
Experience
I have been racing for 20 years, I have been the Central Florida SCCA Regional Championship points for 5 years running, and won the championship in my class 2 times. During my first start in the 60's I won many solo awards and the State Championship Drags. I serve as a senior instructor for SCCA, and have taught in Mercedes AMG events at Daytona, and Dodge Viper Days at Sebring International. I have been in the thick of the competition for all of my career. At one time or another I have driven race cars at speeds nearing 195 MPH. It's quite a ride !
©2012 About.com, a part of The New York Times Company. All rights reserved.