Expert: INSTALLSUPPORT - 10/29/2007

Question
hi my 1995 jeep gc, power locks dont work and there is no remote alarm device. sometimes when i get out of the jeep, and lock it, when i return to start it, it completley dead. i know its something to do with the alarm system, but please tell me why this is happening and how i can correct it. thank you!

Answer
Not an uncommon event in this vehicle.
This question comes up ALOT!

The factory system has gone
bad from the sounds of it.

Normally, you would insert the key in
the drivers door, turn left, then right
to disarm and reset it. If yours is malfunctioning,
you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS
purple/yellow |-| in the driver kick panel area,
at the black plug.

Once Located, splice into this wire with
a simular guage wire, and put it to
a solid chassis ground. This terminates
the alarm functions entirely.

However, at this point, this car would be exceedingly
easy to steel, so I suggest you get an aftermarket
alarm system to protect it from here on in.

Have a good day.

ALARMTEK
CARALARMSTORE.com