Expert: INSTALLSUPPORT - 8/31/2008

Question
hello,
   I have a 1999 ford f150 the fuse for the dome lights was blown and when I replace it the parking lights start flashing. If I take out the fuse parking lights stop flashing but I have no dome light. Truck still starts fine.
Would really like a dome light though.
                                        thanks

Answer
Ok, should be fairly easy. To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

That should solve the troubles for now.
Repeat the steps to toggle back to valet when needed.

Then replace the fuse and bulb if needed.

Let me know what you discover.

ALARMTEK
WWW.CARALARMMAN.COM