Expert: INSTALLSUPPORT - 10/12/2007

Question
is there any way to disable this system so I can uses a key that does not have to be a special key that is programmed by ford.  I have keys that work the doors but not to start the engine what would happen if I used one of these keys would it cause more trouble than I already have

Answer
There is a way.
You make the ignition code reader think the smart
key is in the ignition at all times.
This keeps the system from arming.

To make it happen, print the following
and give it to your technician:

Go get 2 non transponder keys cut at
the hardware store for 3 bucks each.  
Get a universal bypass module (key-in-a-box style)
at www.REMOTESTARTCENTRAL.com for 25.00.

Then wrap the coil around the key cylinder,
secured in place with hot-glue. Connect the
status input wire to chassis ground and the
positive to ignition...no more transponder
key required. No Smart Key security issues.

The total cost on this is
substantially less than what a dealership
would charge to replace and reprogram keys
all the time.

ALARMTEK
ALARMTEK.net