You are here:

Auto body repair & detailing/1999 Chevy Blazer Bumper replacement

Advertisement


Question
What is the procedure to remove and replace the front bumper and "black" on
a 1999 Chevy Blazer? Where can I find a schematic diagram of the assembly
online? That would help with the procedure.

Answer
I don't know where to get a diagram, I never use them. To remove the bumper, remove the grille by literally pulling it straight forward- it's held on with 6 spring clips. There are 4 bolts going down from the top holding the bumper on, 2 up top, 2 back in behind by the frame rails. You can see them fairly easily. There are 2 bolts up underneath on either corner of the bumper, with a 15MM head on them. The top bolts are probably t-50 torx, or 15MM also. The bumper parts are held together with a combination of clips, a couple small bolts, and the impact strip should just literally be pushed in. It can be released by collapsing the plastic nubs sticking through the back side of the bumper. Bill

Auto body repair & detailing

All Answers


Answers by Expert:


Ask Experts

Volunteer


William Forster

Expertise

22 year veteran, 2 years of vocational training. A.S.E. certified Master collision repair/refinish technician. I-CAR certified. 17 yrs. GM experience. I can answer most questions related to automotive body repairs, ranging from small scratch repairs all the way up to the most extensive collision repairs. I can expertly advise people on what to expect from their body shop experience, right down to what self repairs should, and should not, be done. Lastly, I can advise tricks and tips for classic car restoration, such as lead repairs. SORRY, I DO NOT DO ONLINE ESTIMATES OR GIVE PARTS PRICES!! BE PREPARED FOR THE CORRECT ANSWER- NOT THE ONE YOU WANT TO HEAR. I won't B.S. you, or sugar coat answers. Just plain, hard facts.

Experience


Past/Present Clients
Just about every major insurance company in NW Ohio

©2012 About.com, a part of The New York Times Company. All rights reserved.