You are here:
Auto body repair & detailing/94 grand am
Advertisement
Question
I'm doing some minor rust repair on my 94 grand am gt and I need to take off the plastic molding on the outside of the drivers side door to get at some of the damage. I know there are clips on the inside that hold it on but i have no idea how to get it to pop off. Any ideas?
Hello! Remove the 2 screws in the door jamb, and then push up on the bottom of the molding. Then, carefully pull outward on the op of the molding by inserting a putty knife behind it. It should pop right off of there. Proceed carefully so you don't break clips. Bill
- Ask a Question
| Rating(1-10) | Knowledgeability = 10 | Clarity of Response = 10 | Politeness = 10 |
| Comment | Awesome, thanks a lot! | ||
Related Articles
Answers by Expert:
William Forster
Expertise
22 year veteran, 2 years of vocational training. A.S.E. certified Master collision repair/refinish technician. I-CAR certified. 17 yrs. GM experience. I can answer most questions related to automotive body repairs, ranging from small scratch repairs all the way up to the most extensive collision repairs. I can expertly advise people on what to expect from their body shop experience, right down to what self repairs should, and should not, be done. Lastly, I can advise tricks and tips for classic car restoration, such as lead repairs. SORRY, I DO NOT DO ONLINE ESTIMATES OR GIVE PARTS PRICES!! BE PREPARED FOR THE CORRECT ANSWER- NOT THE ONE YOU WANT TO HEAR. I won't B.S. you, or sugar coat answers. Just plain, hard facts.
Experience
Past/Present Clients
Just about every major insurance company in NW Ohio
©2012 About.com, a part of The New York Times Company. All rights reserved.