You are here:
Auto body repair & detailing/Rust holes
Advertisement
Question
I have a 91 Honda Accord I'm trying to do some body work on. Right above the rear passenger side tire there's a rust spot that has made a hole right through the body. How do you suggest I fill this hole?
Thanks
I would "all-around" weld them shut, as the slightest amount of moister will destroy your body work.
If this is not feasible, seal the holes with fiberglass...I would use a hammer to depress the edges of the holes all the way around, then fill the holes (less than flush), as to allow for bondo or top coat. As fiberglass is made to seal the area off...not for shaping.
Related Articles
Answers by Expert:
Cameron Orsich
Expertise
NOTE: MY EXPERTISE IS AUTO BODY...PLEASE limit your questions to the subject of GENERAL AUTO BODY PANEL QUESTIONS...you know: OlD Fashioned, Do It Yourself, By Hand, Back Yard, Under Shop Lights at 3:00 AM AUTO BODY QUESTIONS. I can answer auto body questions for any make, model, or year regarding replacing valances, door skins, fenders, etc... I can also answer questions on how to grind, weld, fiberglass, fill, paste and spray top coat, feather, mask, prime, paint (enamel, lacquer, base-coat/clear-coat), touch-up, melt-in, wet sand, wool polish, sponge polish, finesse, and much, much, more...to much to list here. I love air tools, but if you don't have any...no problem...as I can answer all your questions on how to achieve superb results doing it yourself...the old fashioned way...by hand. If you want a shop answer, go to a shop and pay someone to do it for you. If you want to take pride in doing it yourself, just ask someone who's been there and done that--me, Big CO. I'm available to answer general Auto Body questions for those whom want to do it themselves. Please...no collision, basket case, or train wreck questions. If you have something special that you want to fix, paint, or restore yourself; but don't know how, you've come to the right place...ask me...Big CO, the neighborhood know it all with the shop lights on all night
Experience
Having put myself and my brother through college in the late 80's and early 90's buying and selling over 250 cars. I restored my first car, a '72 350 Chevelle Malibu 4 barrel, in 1978 at just 16 years old. From there, I never looked back...usually restoring classics or sport cars: 340 Cuda's, 396 SS Chevelle's, Novas, Dusters, late 60's Mustang Convertibles, GTO Judges, 455 Buick Grand Sports, about a dozen 280ZX's ('79-'83)--the most recent, in July of '06, I sold a '83 280ZX on cars.com to a gentleman that flew in from Colorado to my state of Ohio just to purchase it from me. As for experience: Have replaced valances, door skins, fenders. Have grounded, welded, fiberglassed, filled, pasted and sprayed top coat, feathered, masked, primed, painted (enamel, lacquer, base-coat/clear-coat), touched-up, melted-in, wet sanded, wool polished, sponge polished, finessed, and much, much, more...to much to list here.
©2012 About.com, a part of The New York Times Company. All rights reserved.