Expert: Brandon Sievers - 9/13/2006

Question
Can you tell me how to remove the interior panel of the driver side front door on a '94 Dodge Intrepid.  The power window struggles about the halfway point when opening only, and I want to see if the channel is seperating from the window at the bottom.  There are four screws which I have removed, but it must have some of the nylon fasteners that I cannot pry loose, trying not to break them.

Thanks for any help.

Answer
Make sure that the screws from the handle and the power lock/window control is removed as well. The nylon fastners need to be pryed out with a trim tool that is flat and looks like a snakes tongue. They is obne about every 6" or so usually 3 on bottom and 3 on each side. The panel then will lift up not pop straight off. If this helps, please make sure to leave feedback.