Automotive/2003 GMC Sierra

Advertisement


Question
When I come to a stop, or slow to a speed bump or even try to do a u-turn, the engine slows to a low idle and sometimes stalls. Someone said it may be the throttle body being sludgy. Is this the only thing that might be wrong? I was also told it was the battery not holding a charge(orginal), so I replaced it and it still happens.

Answer
John,
  I am NOT qualified to answer this question but when I joined this group, I vowed to offer any assistance I can. I'm a Parts Specialist, NOT a Tech but here are my thoughts...
  The problem you are having seems to surround the computer and all the input it is getting. It could be an Idle Air Control Motor (IAC), the Throttle Position Sensor (TPS) or any number of other related sensors. Since the engine had died, the "Check Engine" light has come on, correct? Have you had anyone "scan" the computer for error codes? Something else it could be is the "lock-up" torque converter not "unlocking" at a slow speed. You really need to have the computer scanned to see what error codes are stored in it. I know some parts stores such as O'Reilly has a scan tool you can use to pull the codes from the computer. I don't know what is in your neighborhood.
  I know this doesn't help much but with the information you have given, these are the things I would check. I hope it gives you a little direction. Again, I'm not a Tech, I just push parts. Good luck..
  Skip
  HARD TO FIND AUTO PARTS

Automotive

All Answers


Answers by Expert:


Ask Experts

Volunteer


Skip Bollinger

Expertise

Heretofore, I will NOT answer any mechanical question. I am not qualified and can only offer speculations. You are better served by others that are true Techs. With that being said, please only ask about parts and locating obsolete Auto Parts. Thank you. I have the ability to locate quite a few mechanical parts for American made vehicles fron the 1900`s to present. Some are OEM and some are aftermarket. This would include engine, brake and chassis parts. Body parts and trim are VERY difficult to find but you may inquire. If you need assistance in repair, I have illustrated books for major American manufacturers that show some illustrations BEFORE 1974. If needed, I can supply repair manuals for your specific vehicle. PLEASE REMEBER I'M A PARTS SPECIALIST, NOT A TECH!! Thank you.. Skip

Experience


Past/Present clients
Too many to list but they run from Europe through America and to Australia.

©2012 About.com, a part of The New York Times Company. All rights reserved.