Expert: Eileen Cronk - 8/31/2008

Question
Hi and thanks for answering my question.
I have a coffee table which I want to remove the old stain and add a new one. What is my best course of action.
Thanks again.
Roger

Answer
Hi Roger
Nice to hear from you.
Fairly straight forward job.
Strip all finish then apply your new stain then your top coat.
Here are my complete instructions which apply to your table.
INSTRUCTIONS FOR STRIPPING FURNITURE
The first thing you must do is assemble the material to do the job.
The stripper is the most important item.  
I am hoping you can get "CIRCA 1850" brand paint and varnish remover in your area.
Here is a link
http://www.jamestowndistributors.com/userportal/show_product.do?pid=1694&familyN...

MATERIAL LIST For the stripping stage.
1 quart stripper
1 boxe of Bull Dog steel wool in medium grade.
One 3 inch oil based paint brush.
Rubber gloves (like you do dishes with), and a pair of cotton gloves inside the rubber ones.
People react differently to stripper. A lot of people feel heat through the rubber gloves, but I feel cold. Have no idea why.
An empty large coffee can. (for the stripper)
A couple of old tooth brushes.
Lots of old rags (I like t-shirts or cotton but for this first stage whatever you have)
Lots of newspaper to protect the garage floor
LOTS OF VENTILATION..A MUST
That's all you need to get started.
HERES WHAT YOU DO...
Work in sections.
Brush on the stripper with the brush. Stripper will quit working if it dries, so keep it wet till the finish softens.
Then take a rag and wipe this mess off.
Then another coat of stripper, rag off again, then while the wood is still wet, take the steel wool and rub with the grain till the wood is nice and clean.
Use the toothbrush in crevices.
Thats all there is to it ...move to another section and continue.
No other prep is necessary...and DO NOT SAND
When the stripping is complete, stain with Minwax stain applied with a rag, then 3or 4 coats of low lustre tung oil also applied with a rag.
Please let me know if anything is not 100% clear.
Great project and one you can do easily.
Regards
Eileen