You are here:

Cabinets, Furniture, Woodworks/lane recall/taking the wood venere off

Advertisement

Expert: - 3/5/2009


Question
half or the vevere is alreadt off so I tried to remove the rest with a heat gun.didnt work. tell is there anything out there that will take it off like a stripper/chemical?Also what recall were you talking about from lane?thank you.

Answer
Hi Joe, info for the recall is here:

http://www.lanefurniture.com/customer_care/newlockcpsc.asp

The only way to remove the veneer is physically, a heat gun or an iron should loosen it up, but it will not come off by itself, you'll still need to use sharp chisels, scrapers, etc. to physically get it off...it's tough work to do, and has to be done carefully so as not to gouge the wood underneath. Then you'll have to scrape all the old glue residue off to be able to refinish it properly....regards- Greg

Cabinets, Furniture, Woodworks

All Answers

Answers by Expert:

Ask Experts

Volunteer

Greg Scholl

Expertise

Questions on Woodworking, wood finishing and refinishing of all kinds, repairing furniture and wooden objects, Architectural details, Woodturning, carving, tool usage, product usage, some chemistry as it applies to woodworking and related interests,cabinet making and furniture construction/design, etc. I have experience with all manners of colorants, finishes, paints, stains, dyes, glazes, and coatings, wood species recognition and usage,tool recommendations, blade types and recommendation,techniques and methods for many Woodworking related issues, etc.

Experience

Fine furniture restorer and cabinet maker for over 30 years,serving high end Antique dealers, Interior designers, Collectors in the CT area. Consulting for area Painting/Decorating and Building contractors on non painting issues..(staining, wood prep.,clear finishing, floor restoration and architectural detail restoration and repair, etc.) Sold, built, serviced, setup Home, Industrial, and Commercial stationary woodworking tools for a major tool retailer in CT. for three years, sold hand and power tools , provided knowledge, parts replacement, service, and on site service, Trade show Demo, and training as well.

Publications
Published in Fine Woodworking Magazine (12/97), included on Fine Woodworkings first "Best of Fine Woodworking" CD-ROM (2002) ...("27 year compilation of expert know-how")

Education/Credentials
Art School at Silvermine Guild in Norwalk, CT., 9 year apprenticeship in a European run Cabinet and Restoration shop in CT., various classes on subjects having to do with the field. Seminars from major Tool manufacturers, Skil/Bosch, Delta, Powermatic, Ritter, Porter cable, Milwaukee, Dewalt/B&Decker, Performax.

Past/Present Clients
Many varied clients including work on Martha Stewarts' Westport, CT. show house, many fine Antique dealers and private collectors in and around Fairfield County and in Woodbury, CT. (the Antiques capital of CT.), Golden Age of Trucking Museum, Wilton Historical Society.

©2012 About.com, a part of The New York Times Company. All rights reserved.