AllExperts > Car Alarms 
Search      
Car Alarms
Volunteer
Answers to thousands of questions
 Home · More Car Alarms Questions · Answer Library  · Encyclopedia ·
More Car Alarms Answers
Question Library

Ask a question about Car Alarms
Volunteer
Experts of the Month
Expert Login

Awards

About Us
Tell friends
Link to Us
Disclaimer

 
 
 
 
About ALARMTEK
Expertise
Expertise: Questions about installing/using car alarms, auto starts, and other car security devices. I am the owner of ALARMTEK AUTO SECURITY and have been on the internet since 1994, providing online installation tech support for professional and backyard installers.

Experience
Certification & Qualifications: 28 YEARS IN THE SAME LOCATION INSTALLING CAR ALARMS & ACCESSORIES, SCHOOLS & GRADUATED PROGRAMS INCLUDE: CELLULAR ONE QUALITY CONTROL-BELL ATLANTIC MOBILE-IMTL- SILVER LEVEL MECP-HONDA/TOYOTA SECURITY APPLICATION SPECIALIST - 4 YEARS AT DESIGNTECH INTERNATIONAL TECH SUPPORT DESK - NOKIA TECH COURSE-AAMP & BISHOP ELECTRONIC CERTIFICATES, SKY TRACK 12 VOLT GLOBAL POSITIONING-PRODUCT INSTALLATION-APPLICATION/MASTER CERTIFICATION COURSE & MORE!

Thank You For Stopping By!

CLICK HERE FOR PREVIOUS Q&A
CLICK HERE FOR MY NEWEST ALLEXPERTS PAGE!
Click Here
To Go To
My 12 Volt
Installers Forum!
!!PLEASE READ THIS NOTE!!
I do not provide remote transmitter
programming or, sell replacement
remotes here!

VISIT TODAY!


 
   

You are here:  Experts > Autos > Auto Parts > Car Alarms > car alarm

Car Alarms - car alarm


Expert: ALARMTEK - 11/6/2009

Question
how do i disconnect my stock car alarm on my 1990 infiniti q45?

Answer
Ok, a bit complicated.
 This system depends on the physical action
of the door lock locking and unlocking-arming and disarming.
If you have a factory remote, that would do this to
specifications.

This can only be achieved 3 ways:

1. Use key in the drivers door, turn left,
then right to disarm and unlock.

2. Add an after market keyless entry system to emulate
the factory remote functions. I have several models
if this option suits you.

3. Acquire or use & or, replace the original remote that
can control it as specified. This would be at the
local dealership parts department.

(This is why there is no wire you could ground
without affecting the door lock system.
A single negative pulse to the unlock wire will disarm
without unlocking, yes, but would always disable the
locking mechanism. Not good.)

Keep in mind, if this is after market
(siren and flashing parking lights)
then it's a different method entirely.

The standard method to disables as follows:

Look under the dash area for a button or, a toggle
switch. When you locate it, turn on the ignition
key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emitting diode) light in the dash
should also go on solid. If it's a toggle type,
then key on, flip the switch in the other direction
This would be OVERRIDE/VALET mode.

Repeat this process to toggle back to service mode.

Lastly this car has a transponder in the ignition key
and ignition column. if this system is in "TAMPER MODE"
and the fuel rail has shut down, there is nothing
you can do personally to disable it. The dealer will need
to put it into a diagnostic reset through they're
code reader writer system in the service dept.


Let me know what applies
to your issues.

R. Martin - ALARMTEK

Ask a Question


 
User Agreement | Privacy Policy | Kids' Privacy Policy | Help
Copyright  © 2008 About, Inc. AllExperts, AllExperts.com, and About.com are registered trademarks of About, Inc. All rights reserved.