| |
You are here: Experts > Autos > Auto Parts > Car Alarms > factory car alarm
Expert: ALARMTEK - 11/2/2009
Question
I have a 93 Nissan pathfinder the factory alarm will not stop going off the switch that is near the e brake for the alarm i pulled the wires out and it still makes the lights flash on and off and it makes a beeping sound, i took the fuse out for the horn so that would not sound off. can you please help me i have no idea how to make to stop.
Answer
It's an after market system
from your description.
(valet switches do not exsist in
factory alarms/keyless entry.
Ok then, get over to the local car alarm shop,
or Best Buys will have a valet switch that
will fit for your
alarm.
In the mean time, cut off the switch part,
leaving the 2 wires that were connected, free.
Then twist together, turn on the ignition,
hold both wires to ground until the siren chirps.
That should reset and place the alarm into
over ride for now. Nothing accept the keyless entry
if installed will operate until you repeat the
same steps.
Then get a new switch and you're all set.
Have a good day.
Let me know if you were
successful.
ALARMTEK
CARALARMZ.COM
Ask a Question
|
|
