Expert: ALARMTEK - 11/2/2009

Question
just purchased an old beater with a star guard security system.  the red light is flashing repeatedly and wont start at all.  just got a  new battery the starter isn't clicking and i replaced the "lock" button attached to the firewall and clutch.  I think it's this system since the cars battery was replaced.  any knowledge of how to disable this system?  It's got to go

Answer
To try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is to remove the alarm.
This might require a local technician to
identify it, and affect neccesary service for you.

That should solve the troubles.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM