Expert: ALARMTEK - 6/11/2010

Question
QUESTION: I JUST TRYED INSTALLING KEYLESS ENTRY ON MY 97 F-150 BUT MY REMOTES ONLY CLICK BUT LOCK/UNLOCK MY DOORS .I HAVE REVERSING POLARITY AND I CHECKED THE PINK/LIGHT GREEN WIRE AND THE PINK/YELLOW WIRE AFTER CUTTING THEM I TESTED THEM AND THEY WERE THE RIGHT WIRES BUT I CAN'T GET THEM TO LOCK/UNLOCK DOORS WITH THE REMOTE I CAN HOWEVER STILL USE THE DOOR BUTTONS SO HAVE ANY IDEA WHAT MY PROBLEM IS.

ANSWER: Make sure the relays look like the pic attached.

ALARMTEK

---------- FOLLOW-UP ----------

QUESTION: i'm not sure i need relays as i already had power locks from the factory and i believe the relays are built in but  if not so where do the relays get hook up to .i do have relays from another alarm that i have and the color wires are a blue wire and black wire and white wire and a red and yellow wires to plug that plugs into a relay like this 85  87  87a
         86    30

Answer
Did you test the wires to see if they were negatives?

put toegther the pink/yellow and pink light green wires.
Then using a simple test light, ground the aligator clip
and touch the copper on the pink/yellow wire. If you
get the door to lock, these would be negative door locks.
No relays likely are needed. But make sure the
keyless you have has built in door lock relays to
do 5 wire and follow.

You should contact the people you bought it from for tech support
on this.

A.