Expert: ALARMTEK - 3/25/2011

Question
I have a 2002 Nissan Altima with Pursuit PRO-OE3B4 keyless entry system factory installed. My remotes need replacement. I can not get the alarm to stop and the car will not start. What can I do immediately?

Answer
Ok, an installer would place the velet switch in a semi
hidden area. I'd look under the dash area
for a button or, a toggle switch. When you locate it,
turn on the ignition key, press and hold in the
button (little spring loaded micro button, red or
black possibly), until the alarm chirps 1 time.
This should over ride the system, and only the
keyless entry part, if installed, would still be
operating.

The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE

This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.

The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you, or order new remotes now.

That should solve you issue for the moment.

Let me know what you discover.

ALARMTEK
CARALARMMAN.COM