You are here:

Chevrolet/92 corsica turn signal switch

Advertisement


Question
to replace the turn signal / dimmer switch, in a '92 corsica do i need to pull the steering wheel, or can it be accessed by reomving just the cover around the steering column?

Answer
Hi Kevin, 92 is around the year they changed the steering colum. if you car has the hazard flasher switch on top it is new style. You can replace it by removing the cover around it(some have two screws under the steering wheel, you may have to remove it to gain access to the screws). If your car has the hazard flasher switch under the ignition switch then it is old style. You have to remove the wheel to replace the turn signal switch, but you dont have to remove the wheel to replace the dimmer switch. The dimmer switch is screwed to the side of the steering colum just under the dash, it is controled by a rod inside the steering colum. You have to remove the panel below the steering wheel to get to it. If you need more help just let me know. Regards Keith.  

Chevrolet

All Answers


Ask Experts

Volunteer


keith

Expertise

I can answer most questions on gm cars from the early 80s to the mid 90s. I have a lot of experience with cavaliers, corsicas,grand ams, luminas,ect.

Experience

i have 12 years in the automotive repair industry, on most north american models especially gm. and a little on imports

©2012 About.com, a part of The New York Times Company. All rights reserved.