You are here:

Chevrolet/Chevrolet Tahoe 1995

Advertisement

Expert: Roger J.M. Warrington - 4/13/2005


Question
Hi roger,

after changing the gasket for the intake manifold
Iwant to readjust the ignition.

Where is the cable I must disconnect for this ?

Thanks in advance for your help

Regards
Ralf

Answer
i'am not shure what cable you mean did you remove the distributor to replace thr manifold gasket. if so yoy must re0set the timeing and you will have to remove the distributor if you did not mark it and pop no# 1 cyld. than put the dist in on no# 1 and be shure it is on the no# one plug and also it is on t.d.c. than you can snug up the dist nut and time it as in the book, be carefull and if you have trouble find someone that can help you with the re-instaling of the dist. if this is what you mean. ps sorry for taking so long asd i had my pc down for a few days.
good luck

Chevrolet

All Answers

Ask Experts

Volunteer

Roger J.M. Warrington

Expertise

I can help you with most standard type things from 1955 chevys up to around 1975 (1975)>> chevys in differnt areas. engine work heads-cams-trannys-drive train-brakes-some elect. dos and donts. PS UP TO 1975 !! !!!!!!!!!!! I will try with any others after that date. state up to 1975 but I still get 2006-007 etc. I guess you do not read this far ! !

Experience

All i can remember growing up is working on cars and making them loud and fast , and when i started to make money i would sink all of it into my cars so i could get them to go faster and look great. what else is there !I would love a challange to trouble shoot, as it is fun finding what is wrong when all others can not .ON the older cars not past 1975s , etc. so please I will try to help with the newer cars but do not grade me bad if I can not help your 2006 car.etc.

©2012 About.com, a part of The New York Times Company. All rights reserved.