You are here:

Chevrolet Repair/1990 corvette will not start

Advertisement


Question
Electrical problem
1990 Chevy Corvette
V8 Two Wheel Drive Automatic

I have replaced the fuel pump. Have 42psi in fuel rail.
12 volts on the injector connections. bought a noid
light kit and haven't checked yet but replaced the ECM. checked fuses and wires for breaks. new battery.
I don't think its the pass system because the security light would be on and the starter will not work.
HELP ME PLEASE

Answer
Hi Phil...do you have spark...if not check the ign module/ or coil, check for power at the coil, remove coil wire from the cap and put near ground and turn over engine...do you have a good spark..if you do check the cap and rotor, if not you may have bad ign module....hope this helps

Chevrolet Repair

All Answers


Answers by Expert:


Ask Experts

Volunteer


Robert Summers

Expertise

domestic auto/truck repair, auto body, painting. I currently own a large auto/truck/marine repair shop. 40 years certified 310S,310T,310B in ontario Canada

Experience

40 years certified 310S,310T,310B ontario qualified, 7 years with GM have owned my own shop now for the past 27 years.was automotive marketing director for large auto parts supplier.

Organizations
CFIB (current) past member AARO and APAA.

Education/Credentials
grade 12 plus 2 years college. many aftermarket training courses

©2012 About.com, a part of The New York Times Company. All rights reserved.