You are here:

Chevrolet Repair/1995 Chevy S10 Blazer 4wd

Advertisement


Question
Recentlt dropped tank to repair wires to fuel pump for a no start condition. Put back together and was running than it stopped. Now it won't start. Can hear pump running when I turn on the key than stops after about 2 seconds I guess when pressure builds up. When Iturn the ignition to start it cranks but doesn't start. When I shut the key off I hear the pump running for about 5-6 seconds than shuts off. Any ideas?

Answer
Hi Cy.... when you dropped tank did you remove fuel lines...if you did make sure you didn't mix them up. easy check is at the fuel rail there should be a valve that looks like a tire valve... cycle key the push in the valve and see if you have fuel pressure.. if no pressure check your lines to see if reversed or plugged fuel filter...also sometime even though pump runs you may not get fuel pressure as impeller is broke on the pump...you may need to check that...hope this helps

Chevrolet Repair

All Answers


Answers by Expert:


Ask Experts

Volunteer


Robert Summers

Expertise

domestic auto/truck repair, auto body, painting. I currently own a large auto/truck/marine repair shop. 40 years certified 310S,310T,310B in ontario Canada

Experience

40 years certified 310S,310T,310B ontario qualified, 7 years with GM have owned my own shop now for the past 27 years.was automotive marketing director for large auto parts supplier.

Organizations
CFIB (current) past member AARO and APAA.

Education/Credentials
grade 12 plus 2 years college. many aftermarket training courses

©2012 About.com, a part of The New York Times Company. All rights reserved.