AllExperts > Chevrolet Repair 
Search      
Chevrolet Repair
Volunteer
Answers to thousands of questions
 Home · More Chevrolet Repair Questions · Answer Library  · Encyclopedia ·
More Chevrolet Repair Answers
Question Library

Ask a question about Chevrolet Repair
Volunteer
Experts of the Month
Expert Login

Awards

About Us
Tell friends
Link to Us
Disclaimer

 
 
 
 
About Robert Summers
Expertise
domestic auto/truck repair, auto body, painting. I currently own a large auto/truck/marine repair shop. 40 years certified 310S,310T,310B in ontario Canada

Experience
40 years certified 310S,310T,310B ontario qualified, 7 years with GM have owned my own shop now for the past 27 years.was automotive marketing director for large auto parts supplier.

Organizations
CFIB (current) past member AARO and APAA.

Education/Credentials
grade 12 plus 2 years college. many aftermarket training courses

 
   

You are here:  Experts > Home/Garden > Auto Repair > Chevrolet Repair > 1995 1500 pickup

Chevrolet Repair - 1995 1500 pickup


Expert: Robert Summers - 10/2/2009

Question
QUESTION: I have a 1995 1500 pickup with the 5.7 engine.  It became hard to start and now it will crank but wont start.  There is on spark and the fuel pump is not pumping. I have replaced the fuel pump and the distributor turns.  The fuses look good.  Dont know where to go from here.

ANSWER: Hi Joe... when you turn key to on, do you hear the fuel pump run for 3 seconds then quit...if not check the fuel pump relay in the power dist box under the hood. check for fuel pressure at the fuel rail..if you have pressure and you have spark then it should run... if you have no spark check the cap and rotor..they are a known problem on these model trucks...if still no spark check ign module and replace if needed...hope this helps

---------- FOLLOW-UP ----------

QUESTION: Here is what I've done so far.  I have replaced the fuel pump,dist cap,rotor,plug wires,coil, and the ing module.  The fuel pump dose not prime when the key is turned on.  There is still no fuel being pumped and still no spark.  The rotor is turning when the truck is turned over but it still wont start.  Any other ideas?

Answer
Hi Joe.... if the pump is running and you still have no fuel check to see if when you replaced the pump that you have fuel lines on in the correct spots...is there enough fuel in it for pump to pick up the fuel.for the no start problem check the ign module for 12v and check the fuses for the pcm...make sure you have power on both sides of those fuses....hope this helps

Ask a Question


 
User Agreement | Privacy Policy | Kids' Privacy Policy | Help
Copyright  © 2008 About, Inc. AllExperts, AllExperts.com, and About.com are registered trademarks of About, Inc. All rights reserved.