AboutRobert Summers Expertise domestic auto/truck repair, auto body, painting. I currently own a large auto/truck/marine repair shop. 40 years certified 310S,310T,310B in ontario Canada
Experience 40 years certified 310S,310T,310B ontario qualified, 7 years with GM have owned my own shop now for the past 27 years.was automotive marketing director for large auto parts supplier.
Organizations CFIB (current) past member AARO and APAA.
Education/Credentials grade 12 plus 2 years college. many aftermarket training courses
Question How do I get the sway bar link between the arms? When I lift one, the control arm gets in the way - cannot get the spacer and rubber bushings to fit...and vice versa when I let it down...or the reverse.
Answer Hi April....you don't say what year it is so is it one piece link or 4 bushings with washers and a spacer....usually the 4 piece....take it apart...from the underside of the control arm you start...put washer and one bushing on the link put up thru hole in control arm install bushing then washer from other side then install spacer then another washer then rubber bushing install sway bar then another rubber then washer then nut... tighten nut and repeat for the other side....i cannot send you a pic over this link but you may find one on the net or go to local dealer they are pretty friendly these days and get them to print you a diagram...hope this helps
