AboutKevin Expertise I work at a Chrysler,Dodge,Jeep Dealer,
Master AC
Master Driveability
Master Electrical
Master Brakes
Chrysler,Dodge,Jeep Tech for 11 Plus years
Questions 96 and up please
I do work on the side in the ATLANTA area Email me with Work requests for side jobs kkeller608@aol.com Web page http://home.comcast.net/~kkeller608/
Experience I work at a Chrysler,Dodge,Jeep Dealer.
Master AC
Master Driveability
Master Electrical
Education/Credentials 11 years working with Chrysler Dodge and Jeep
2 year associates degree for Chrysler CAP
Expert: Kevin Date: 5/3/2008 Subject: 2001 chryslr grand voyager
Question hi kevin, having problems getting a diagnosis with my GV,cutting out at low revs,eg turning into a driveway,rev counter "wobbling" at low revs.serviced recently no probs detected. any ideas?
Answer give this a shot any check engine light?
SUBJECT:
Engine Sag/Hesitation And/Or Closed Throttle Start Stall
OVERVIEW:
This bulletin involves replacing the Throttle Position Sensor (TPS).
MODELS:
2001 - **2002** (RS) Caravan/Voyager/Town & Country
2001 - **2002** (RG) Chrysler Voyager (International Market)
NOTE: **THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 3.3L OR 3.8L
ENGINE AND BUILT BEFORE OCTOBER 01, 2001 (MDH 1001XX).**
SYMPTOM/CONDITION:
Engine hesitation/sag, closed throttle start/stall, and/or Diagnostic Trouble
Code (DTC) P0123 – “Throttle Position Sensor Voltage High”. May be more
prevalent in cold temperatures below 0 C. (32 F.).
DIAGNOSIS:
If no DTC’s are present or DTC P0123 is present, perform the Repair Procedure.
If other DTC’s are present further diagnosis is required.
PARTS REQUIRED:
Qty. Part No. Description
1 04686360AB Sensor, Throttle Position
REPAIR PROCEDURE:
1. Disconnect the negative battery cable.
2. Remove the electrical connector from the Inlet Air Temperature Sensor.
3. Remove the air cleaner box lid. Remove hose from throttle body.
4. Disconnect the electrical connector at the TPS.
5. Disconnect the electrical connector at the Idle Air Control (IAC).
6. Remove the three (3) TPS mounting bolts and TPS.
7. Reverse the previous steps to install new TPS, p/n 04686360.
