AboutKevin Expertise I work at a Chrysler,Dodge,Jeep Dealer,
Master AC
Master Driveability
Master Electrical
Master Brakes
Chrysler,Dodge,Jeep Tech for 11 Plus years
Questions 96 and up please
I do work on the side in the ATLANTA area Email me with Work requests for side jobs kkeller608@aol.com Web page http://home.comcast.net/~kkeller608/
Experience I work at a Chrysler,Dodge,Jeep Dealer.
Master AC
Master Driveability
Master Electrical
Education/Credentials 11 years working with Chrysler Dodge and Jeep
2 year associates degree for Chrysler CAP
Expert: Kevin Date: 5/16/2008 Subject: 2005 Grand Caravan interior trim
Question I am attempting to install an aftermarket backup camera. It is designed to fit into license plate holder. I need to run a camera power wire through the rear hatch, up and around rear window, out through flex cover, around the left side of hatch opening (interior) and into backup light area of left lens. I need instructions as to the removal of interior deck hatch trim and the trim around left side of rear hatch (to access wiring harness of left light assemble cables). Can you help, Sir?
Answer REMOVAL
CAUTION: Disconnect the negative cable clamp from battery post. Damage to accessory feed circuit can result.
Remove first row seat.
Remove second row seat, if equipped.
Remove front door sill plate on three door vehicle.
Remove sliding door sill plate on four door vehicle.
Remove left quarter trim bolster.
Remove C-pillar trim panel.
Remove left D-pillar trim panel.
Remove first row seat belt anchor.
Remove second row seat belt anchor on long wheel base vehicle.
Remove screws attaching quarter trim to quarter panel from bolster area.
Remove screws attaching rear edge of quarter trim to attaching bracket or inner quarter trim panel.
Disconnect wire connector from accessory power outlet, if equipped.
Remove quarter trim from quarter panel.
Pass front seat belt and turning loop through slot in quarter trim panel on three door vehicle.
Pass first row seat belt through slot in quarter trim panel.
Pass second row seat belt, if equipped, through slot in quarter trim panel on long wheel base vehicle.
Remove quarter trim panel from vehicle
REMOVAL
Remove the bolt attaching the lift motor link, if equipped (LIFTGATE MOTOR).
Remove liftgate upper frame molding (LIFTGATE TRIM).
Remove assist handle screws.
Disengage hidden clips holding trim panel to liftgate from around perimeter or liftgate (LIFTGATE TRIM).
Disconnect wire connector from lamps.
Remove liftgate trim panel from vehicle.
