AboutRoland Finston Expertise I take questions about domestic Chrysler-product front wheel drive cars and minivans for the years 1982-2000 based upon my experience and shop manuals. I don't have detailed information (e.g. manuals) nor expertise for Jeeps, trucks, SUV's, import vehicles, or for years more recent than 2000.
I am available to take a question between 8AM CST and 9PM CST . If I am shown as "maxed out" try again later in the day as I add question opportunities one at a time so as to respond quickly, but I do have other responsibilities as well so may not be available for several hours at times. Try at 7PM CST as I will always be available for one question then.
There are answers to hundreds of Chrysler questions at your finger tips: click on "view past answers", one of which may be to your question as well; or put a few key words in the "search for" box, above.
Experience I have been a do-it-yourself auto hobbyist for 5 decades, and most recently have been concentrating on the various Chrysler Corporation domestic front wheel drive cars and vans. I have shop manuals and wiring diagrams for many models for the years '83-'00, as well as rear wheel drive cars for the early 80's. I enjoy analyzing problems that other Chrysler enthusiasts are having and sharing my information.
Organizations belong to Group co-moderator of the Yahoo autos group The Chrysler LeBaron Club
Expert: Roland Finston Date: 5/4/2008 Subject: removing drive belt from Chrysler 2.7L
Question I know how to remove tension for the a/c but cannot remove
tension on powersteering altenator and crank? Thanks for time!!!
Answer Hi Doug,
The tensioner pulley's shaft (the pulley inbetween the other three pulleys) has a lock nut on the end of it, so loosen that. Then behind the pulley at about 11 o'clock position is the adjusting bolt to loosen the tension. Install is the reverse.
Roland
