You are here:

Chrysler Repair/07 PT Cruiser Shifter Cable


I have a 07 PT Cruiser Automatic it is very difficult to change gear. I was told I need to change the shifter cable. I want to know how do I go about changing it myself.

1. Loosen set screw (2) and remove knob (1) from shifter handle.
2. Remove the center console assembly (1).
3. Remove shifter bezel (1).
4. Disconnect shift cable (3) from shifter mechanism (1).
5. Remove three grommet plate to floor pan nuts as shown in.
6. Remove air cleaner assembly (1).
7. Disconnect both battery cables, remove battery hold down clamp and bolt, and remove battery (1).
8. Remove battery tray (1) from bracket.
9. Disconnect shifter cable (2) from shift lever (1) and remove from bracket.
10. Raise vehicle on hoist.
11. Remove catalytic converter heat shield (1).
12. Remove remaining grommet plate (1) screw and remove cable assembly (2) from vehicle.
Click to buy NOW!
Click to buy NOW!

Chrysler Repair

All Answers

Answers by Expert:

Ask Experts




Free Dealer trained advice. Dealer trained 15 years Now owner of KEVIN'S MOBILE REPAIR in Atlanta GA I have a mobile Chrysler,Dodge and Jeep repair service in ATLANTA area Email me with Work requests Web page WWW.KEVINSMOBILEREPAIR.COM Master AC Master Drive ability Master Electrical Master Brakes Chrysler,Dodge,Jeep Tech for 14 Plus years Questions 96 and up only. Please don't ask about a noise,a fluid leak or how much something is to fix thanks.


15 years working at a Chrysler Dodge and Jeep dealer 20 Years over all experience ACE cert Master AC Master Driveability Master Electrical

15 years working at a Chrysler Dodge and Jeep dealer 2 year associates degree for Chrysler CAP

©2017 All rights reserved.

[an error occurred while processing this directive]