You are here:
- Home
- Home/Garden
- Clocks and Watches
- Clocks, Watches
- Setting the beat on Grandfather clock
Clocks, Watches/Setting the beat on Grandfather clock
Advertisement
Question
wasn working - moved - the pendelon is not hooked right or something - the pendelon will not continue to swing - clock is balanced - before there was some little part that the pendlon hung from that had to be adjusted and it worked fine, do not remeber what i was told to do - found answer to problem on internet - but cannot find now - please help me - purchased around the 70's - thanks lauralu tyson porter
Hi Lauralu,
)
The most likely cause of the problem is either that the pendulum is out of beat, or the parts of the pendulum assembly have become disconnected or improperly connected. I have attached a photo of the pendulum assembly correctly assembled. It may not look identical on your clock, but the basic arrangement of parts is the same.
The "beat" is the adjustment of the pendulum to make it swing exactly equal distances from dead center to the left, as from dead center to the right. If a clock is out of beat, the pendulum will swing for a few minutes, then stop.
Listen to your clock's tick. If a clock is in beat it goes "tick-tick-tick" like a metronome. If it goes "tick-TOCK-tick-TOCK", or makes no tick at all, then it is out of beat. Some clocks have automatic beat setting; try starting your clock with as wide a swing as possible. If it has auto beat setting it will correct its beat as it settles down to a normal swing.
If your clock does not have auto beat setting, the beat will have to be set manually. This is a delicate adjustment which takes some experience to do properly. You may want to have a professional clock repairer do a service call to set the beat. If you want to try doing it yourself, this is the procedure:
Remove the side or back panels to access the back of the movement. You will see that the pendulum top is connected to a strip of metal about 6 inches long. This is the pendulum leader. There will be another flat brass strip (the crutch) which comes out of the back top of the movement, bends to go straight down, then ends in a connection to the pendulum leader. This connection will be either a round post on the crutch going through a hole in the leader, or a forked end on the crutch going around the leader.
Now move the crutch to either side. You will feel a point of slight resistance near the end of the swing. Push the crutch past the point of resistance, just a tiny amount, probably less than you can see. If the uneven ticking sounds worse, or if there is no tick, do the same thing in the opposite direction of swing. Do this in small adjustments on whichever side makes the tick more even, until you achieve the steady "tick-tick" sound.
Adjusting the beat is a very delicate process, and it will most likely take a few tries for you to "get the feel" of the adjustment. But, if you do it patiently and in very tiny adjustments, you will probably be able to correct the beat. http://www.clockmasteronline.com
Related Articles
Answers by Expert:
Martin Meyer
Expertise
Can answer repair and service questions for most types of clocks, antique and modern, mechanical and battery. NO watches, appraisals, identification, history, dating, or questions about cuckoo clocks. Website for Modern and Antique Clock Repair: Clockmasteronline.com
Experience
24 Years as owner and repairman of clock repair business, 28 years in the field. Factory Independent Service Center for Howard Miller, Ridgeway and (formerly) Sligh Clocks. Specializing in Fine Antique Longcase (grandfather) clocks. Clock repair Website: (Please remove "Not" from the address - this is a spam protection): www.NotClockmasteronline.com
Organizations
AWCI (American Watchmakers and Clockmakers Institute) and NAWCC (National Association of Watch and Clock Collectors)
Publications
Am also an Expert in the "AllExperts-Antiques-Antique Clocks" Category.
Education/Credentials
Trained by a former Rolex Asia watchmaker, and by a Master Watchmaker/Clockmaker.
©2012 About.com, a part of The New York Times Company. All rights reserved.