	AllExperts > Clocks, Watches
	Search

About Kenneth Saunders
Expertise
any mechanical clock question -no watches- no battery clock questions and no appraisals-ie: "how much is my clock worth?" type questions please! Attach a photo if possible and note all markings on the rear of the mechanism- thanks 36 years as a professional clock repair person- still a full time clock repair service owner

Experience
36 years as a professional clock repair person- still a full time clock repair service owner.

Organizations
NAWCC

Education/Credentials
above

You are here: Experts > Home/Garden > Home Appliances > Clocks, Watches > grandfather clock won't run emperor kit

Clocks, Watches - grandfather clock won't run emperor kit

Expert: Kenneth Saunders - 5/3/2009

Question
My father inlaw built this kit in the 70's. (has since passed away)My husband was ill and on strong meds when he reset after daylight savings time. has not worked since.
anything would be worth a try. It was 100.00 12 years ago to have someone come out.
Thanks for your time.

Answer
-The pendulum assembly begins at the top with a 1" two legged suspension spring pinned to a brass post sticking out of the back of the rear movement plate.
  Next a silver(probably) suspension leader about 5" long that hooks onto the bottom of the suspension spring and passes through the "foot" shaped forked brass piece (and must be in the center of the fork slot and not be rubbing front or back) that connects into the inside of the movement. Newer movements have a horizontal bar that fits in the brass suspension leader slot.
  Lastly the top of the pendulum hooks onto the bottom of this suspension leader. NOW if all is correctly assembled, swinging the pendulum will get it ticking. The sound of the ticking must sound even or balanced on either side. Not over-swinging one side or the other.
  If it is not sounding even, then push with your hand the top third of the pendulum over to the side that has the excessive overswing. You may feel some resistance but gently push a bit more then try the sound of the ticking after swinging the pendulum freely.
  If the sound is not improved in the balance then do more pushing -if it is now sounding like excessive swing in the opposite direction then push the pendulum to the other side till it sounds a pretty even tick. Clock should run then. .(There is a little slip clutch that you are adjusting when you push the "L" shaped foot to either side.)
  There are a hundred things that could be wrong- you have just taken a tour through the repair of what is wrong 98% of the time!

Ask a Question