You are here:
- Home
- Home/Garden
- Clocks and Watches
- Clocks, Watches
- replacement pendulum for Jauch 96 mech.
Clocks, Watches/replacement pendulum for Jauch 96 mech.
Advertisement
Question
I inherited an Elgin Hall Clock (model # E404/1) that was purchased by my grandfather in the late '60s or so - the movement is stamped "Jauch 96". The pendulum disappeared during my last move, so I need to find one that will work with it. Also, any recommendations on any type of cleaning/maintenance etc. that might be appropriate. Thanks!
Matt, as Jauch went out of business a quite a few years ago, stock parts have mostly disappeared from the shelves of the clock supply companies. However, it is possible to make up a pendulum. I have a rare copy of the vintage Jauch movement specs and can probably make one for you. I will assume that the pendulum was a wood stick with a brass bob, as most of these types were. I do have all the parts and some will have to be measured and cut to come up with the proper configuration. The Jauch 96 designation was used for a couple of different movement types, which resulted in variations of dimensions. It will help greatly if you can send me a photo of the back of the movement, showing the pendulum hanging arrangement. Also, how wide is the inside of the case where the pendulum bob swings? This will determine the size pendulum bob that is used. If you will send this information to my shop email address below, I can exchange some more details with you, and see if we can't get your clock going again.
John Newman
THE VILLAGE CLOCKSMITH
Old Prattvillage
Prattville, Alabama
klokdok@juno.com
(Due to the number of Allexperts questions and
the workload I have at my clock shop, I regret
that I cannot answer personal email questions on a timely basis
other than Allexperts follow ups.)
Related Articles
Answers by Expert:
John Newman
Expertise
As much as I would like to offer values of clocks, I am not a certified appraiser and will not venture into giving an unresearched guess. There is very little published information on what I consider to be the value of "modern production clocks". Considerations are what the clock originally sold for, the condition of the case and movement, and particularly the area in which you live, the demand and the economy. ALSO, WATCHES ARE NOT MY FIELD. However, I can advise the clock owner on proper maintenance of a clock to keep it running, small corrections and adjustments and how to move a clock without damaging it. I can also advise on obtaining parts for clocks. It helps if you can send any information on the clock movement which is usually found on the back plate of the movement. I have been a clockmaker for about 35 years and was plant engineer in the mid 90's and later operations and engineering consultant at Emperor Clock Company in Fairhope, Alabama. I now have my own clock shop.
Experience
One of my greatest accomplishments was traveling to China to assist a clock factory in building clocks to the standards which we required. With the proper specifications and quality control, some beautiful clock cases were built. The factory people from the wood carvers to the plant manager were very congenial, friendly and I left a lot of wonderful friends when I returned from my trips.
Organizations
Chamber of Commerce
Small Business Committee
Publications
Horological Times, a publication of the American Watch and Clockmakers Instute. Collaberated column author, with Photos and ideas for clock movement conversion article.
Education/Credentials
Associate of Science Mechanical Engineering Technology
Emperor Introductory Clock Repair (Eventually taught a portion of the class after becoming employee)
Awards and Honors
Small Business of the Quarter (Prattville, Alabama)
Leadership Class of 2009 (Autauga County, Alabama)
©2012 About.com, a part of The New York Times Company. All rights reserved.