Expert: Michael Radi - 9/2/2010

Question
I had to start over as the message I got said I had too many messages.  On the
inside of the clock (I took the back off), there is a 1/2 inch moulding that the
face (fiber board) of the clock sets on leaving 1 1l2 inches left to the end of
the side  of the back side.  The second hand stem is 3/8 inch and is tube-like
with a pinhead opening/shaft.  The thickness of the fiber board that the hour
and minute hands are on is 1/8 inch.   Thanks, Joan  PS  If I have another
problem getting through to you, what can I do>

Answer
Because your original movement is missing we don't know much about the hand shaft (the length and diameter of the shaft). So I'm going to guess a bit here. I can tell from the ebay photo that the movement was made by Quartex. Here is a link to a Quartex movement and might be what you are looking for:
http://www.klockit.com/products/dept-157__sku-Premium_Quartex_Brand_Push_On_Move...
Michael
www.norkro.com
clock parts and repair