You are here:

Collectibles-General (Antiques)/Rowe AMI Record arm sticking on turn table

Advertisement


Question
I have been using my jukebox for many years, unfortunately this week-end the arm that brings the record on the turn table gets stuck on the turn table. Has it comes down and tries to turn to place the record it gets stuck on the turn table, is there an adjustment?

Thanks


Danny

Answer
Hi Danny,

To find this problem I would recommend a reference book by Dr. Know it all, and you can find this book here:

http://www.alwaysjukin.com/items/jukebox-reference-books/list.htm

He worked repairing jukeboxes here in Seattle at Jukebox city and he would write about what was wrong with a box and how he found it, and how he repaired it so this is like step by step instructions almost.

You could even try writing him if you like to see if he can give you some things to check or some ideas on how to fix it. His personal web site is at:

http://www.eskimo.com/~hhagen/hagentech/radiorepair.html

I hope you find this information very helpful in repairing your jukebox.

Thank You
Rodger Knutson
http://www.coinslots.com  

Collectibles-General (Antiques)

All Answers


Answers by Expert:


Ask Experts

Volunteer


Rodger Knutson

Expertise

I am an expert on old coin operated machines, slot machines, trade stimulator's, jukeboxes, old arcade machines, etc. I have been identifying these for people who respond to my web site listed below, for a few years now. In almost all cases I am able to tell them about their old coin operated machines, the year, the value, and other general information about their machines. I do not know much about soda vending machines, coin banks, or scales, but I will try to help you with these if I can. Please email photo's to: info@coinslots.com My web site is at: http://www.coinslots.com

Experience

I bought my first slot machine, a .50 Cent Mills Black Cherry in 1969 and have been hooked from that time, I still have that Slot machine! Before that I found a open barrel full of old scraped jukebox wall boxes behind a restaurant, I wanted them all but never took a one of them. Anything that took a coin drove me nuts!

Organizations
C.O.C.A. and other slot and coin operated machine groups, associations, groups, and clubs.

Publications
Many, the Coinslot magazine, always juken, Coin Slot Journal, Slot Box Collector, and others that I don’t remember at this time.

Education/Credentials
Graduated from Ballard High School in 1969, went to Edison Technical Collage for a couple of years taking welding and metal fabrication, tig, mig, heliarc, also arc and gas welding and fabrication. Then Apprenticed under a slot machine technician who worked in the slot machine industry Reno Nevada, and set up bar poker progressive machines in the casino's, and repaired machine and did the repairs on slot machine circuit boards there. He also was involved in the 2 hand dealer's market and bought and sold machines at the casinos auctions for the secondary market, which includes selling used machine overseas. I learned a ton from this man; he always had the correct answers and took the time to teach me the business. My interest and knowledge in other and older coin operated machine is for the most part, self-taught. It's been my passion from back in 1968 and before, my thirst for knowledge about these machines has kept me more interested over the years, and keeps me searching for more information even today. I have meet and talked to book authors on these machines, attended hundreds of coin operated shows and auctions, and I stay with that to this very day.

Awards and Honors
Take a look at my allexperts rating, and my guest book, links to these are at http://www.coinslots.com Also you can check my 100 percent rating on ebay, as I have been there with ebay from their day one, I am user coinslots at ebay. My other awards come from the very people that I deal with, I always make them happy, no matter what it takes, but they always are happy anyway as the countless thank you letters testify to me, so I know I am doing right, and the best I can. I have found so many hard to find parts for people, I hunt them down and don't stop until I find what is needed to get that customers machine running again and back to life, that is my main goal.

Past/Present Clients
Client privacy prevents this answer, as some are VIP and famous and I will not betray the trust.

©2016 About.com. All rights reserved.