Expert: Steve Forbes - 10/1/2004

Question
Which fuse supplies the back up lights.  Its not identified in the owner's manual.

Lights stopped working.  Bulbs OK.  Next step is fuse.  If that's OK will look for a contact on or near the tranny.

Thanks

Answer
Bob,

The fuse is tied in to the brake lamp fuse .
The best way to check the circut is to remove the switch conector on the trans . there are three wires in the conetctor. if you jump the two outside terminals the lights should come on.  If not you have a break in the wires or the bulb socket.  The middle wire is the safty ground for the gearshift.

Steve