AboutKevin Expertise I work at a Chrysler,Dodge,Jeep Dealer,
Master AC
Master Drive ability
Master Electrical
Master Brakes
Chrysler,Dodge,Jeep Tech for 13 Plus years
Questions 96 and up only. Please don't ask about a noise,a fluid leak or how much something is to fix thanks.
I do work on the side in the ATLANTA area Email me with Work requests for side jobs kkeller608@aol.com Web page http://home.comcast.net/~kkeller608/
Ignite Home site serving Georgia and Texas please visit http://kevinkellerenergy.mystreamenergy.biz
Experience I work at a Chrysler,Dodge,Jeep Dealer,
Master AC
Master Driveability
Master Electrical
Master Brakes
Chrysler,Dodge,Jeep Tech for 11 Plus years
Education/Credentials 2 year associates degree for Chrysler CAP
Question I need to remove the bracket that blocks removing the lower bolt on the starter -- chilton manual says nothing about it. Is it a simple removal or part of a bigger support system for the engine?
Answer REMOVAL - 2.0L AUTOMATIC TRANSMISSION
Disconnect the negative battery cable.
Remove the air cleaner box, refer to the air cleaner box removal/installation in this section.
Remove the 2 upper bracket bolts for the intake support (INTAKE SUPPORT BRACKET).
Raise vehicle and support.
Remove the oil pan support bracket (OIL PAN BRACKET).
Remove the intake support bracket (INTAKE SUPPORT BRACKET LOWER BOLTS).
Disconnect the battery cable and solenoid connection from the starter.
Remove the starter bolts.
Remove starter.
