Expert: Kevin - 6/25/2009

Question
how do install the passenger side window lift motor on a 2007 dodge grand caravan sxt

Answer
REMOVAL
1. Remove watershield. (Refer to 23 - Body/Door - Front/WATERSHIELD - Removal)  
2. Remove inner belt molding. (Refer to 23 - Body/Weatherstrip/Seals/WEATHERSTRIP, Door - Removal)  
3. Remove door glass. (Refer to 23 - Body/Door - Front/GLASS, Door - Removal) .
4. Disconnect wire connector from power window motor.

5. Loosen screws attaching front and rear window guide rails to inner door panel Fig. 1 .


Fig. 1 - FRONT DOOR POWER WINDOW  
1 - POWER WINDOW MOTOR  
2 - FRONT DOOR  
3 - GUIDE RAILS  

6. Remove screw heads on guide rails from key hole slots in inner door panel.
7. Remove fasteners attaching motor/housing to inner door panel.

8. Remove regulator from inner door panel Fig. 2 .


Fig. 2 - FRONT DOOR POWER WINDOW  
1 - FRONT DOOR  
2 - GUIDE RAILS  
3 - POWER WINDOW MOTOR  


9. Extract rear guide rail through inner door panel rear access hole Fig. 2 .
10. Extract front guide rail through front access hole