AboutKevin Expertise I work at a Chrysler,Dodge,Jeep Dealer,
Master AC
Master Drive ability
Master Electrical
Master Brakes
Chrysler,Dodge,Jeep Tech for 13 Plus years
Questions 96 and up only. Please don't ask about a noise,a fluid leak or how much something is to fix thanks.
I do work on the side in the ATLANTA area Email me with Work requests for side jobs kkeller608@aol.com Web page http://home.comcast.net/~kkeller608/
Ignite Home site serving Georgia and Texas please visit http://kevinkellerenergy.mystreamenergy.biz
Experience I work at a Chrysler,Dodge,Jeep Dealer,
Master AC
Master Driveability
Master Electrical
Master Brakes
Chrysler,Dodge,Jeep Tech for 11 Plus years
Education/Credentials 2 year associates degree for Chrysler CAP
Question What is the rear bearing torque for a 2002 Dodge Stratus?
Answer INSTALLATION - HUB AND BEARING
Install the hub and bearing assembly on the knuckle spindle. Install a NEW retaining nut. Tighten the retaining nut to a torque of 250 N·m (185 ft. lbs.).
Install the hub and bearing dust cap using a soft faced hammer.
Install the brake rotor on the hub and bearing.
Install the disc brake caliper. Refer to Brakes.
Install the rear tire and wheel assembly on vehicle. Tighten all wheel stud nuts in crisscross pattern to one-half the specified torque. Repeat pattern, fully tightening the stud nuts to a torque of 135 N·m (100 ft. lbs.).
Lower the vehicle
