I can answer questions on graphite fly rod building and bamboo rod restoration and making. I can guide people to restorers . I can guide people to rod building components on the internet as well as catalog. I can help them identify and value their bamboo fly rods with a picture .
If you are asking for the id of an old rod
please give a complete description
,
, send pictures especially labels or logos to me macsrods@yahoo.com and a complete including as much the following as you can:
Is it? fly or casting rod ? Reel seat is below or above the cork handle ?
Check metal for id and patents ? What is it made of; bamboo ( flat sided) fiberglass or graphite ( round)? Weight in oz? What is the diameter of the rod above the cork? Where was it purchased ? What type of metal nickel-silver, tin, or chrome platted brass? A complete description of any logos or labels. Length of rod per section and number of sections. Total rod length.
Please read the following if the rod has either of the following two labels
Montague or H-I (Horrocks-Ibbotson).
They are looked down upon by the collecting community and often they are justified. They were mass produced , rather heavy and very slow. They are not going to resale for very much.
Two books are available at larger libraries to get history and or value: Antique & Collectable Fishing Rods: Identification & Value Guide Homel, Dan. 1997 Bamboo Rod Restoration Handbook -Michael Sinclair
Commission Sales
Because of my knowledge I can help you sell and get a good price for your vintage bamboo fly rod. email
email Mac
Experience I have been restoring bamboo fly rods for 15 years and making graphite for 17 .
Publications website = www.macsrods.com
click home page
Question I am a very avid angler as is my father, and I am also well studied in chemistry but I have a question that I cannot find an acceptable answer for, what does the IM number on a graphite rod blank mean? (ie. IM6, IM7, etc.) and why is a higer number better? does the designation have anything to do with the manufacturing standards, or just simply the way the graphite polymer is put together?
Thanks
Kevin Edwards
PS, feel free to post this on your message board, I don't think I am the only one that would like some clarificatrion on the issue
