AllExperts > Fishing 
Search      
Fishing
Volunteer
Answers to thousands of questions
 Home · More Fishing Questions · Question Library  · Free Encyclopedia ·
More Fishing Answers
Question Library

Ask a question about Fishing
Volunteer
Experts of the Month
Expert Login

Awards

About Us
Tell friends
Link to Us
Disclaimer

 
 
 
About Robert Vermillion
(Top Expert on this page)

Expertise
I can answer questions about collecting antique fishing lures, reels, and other items. www.folkartfishinglures.com

Experience
I have been collecting for 20 years.

Organizations
NFLCC (National Fishing Lures Collectors club)

Publications
NFLCC Gazette

Education/Credentials
Member NFLCC

   

You are here:  Experts > Recreation/Outdoors > Fishing > Fishing

Questions Answered By Expert  Robert Vermillion 
In Category  Fishing

SubjectDate Asked

Trailmaster No"4TMU"11/19/2009
  Q: When my uncle died I received this rod "Trailmaster" 7 1/2FT. No.4TMU. I know nothing about this ...
  A: I suspect your rod is either Wright and McGill or Eagle Claw rod. These run $10 to $40 depending on ...
Granger Vicorty Rod11/18/2009
  Q: I have a "Wright %26 McGill Granger Victory Rod Number GV.9660, Length 9' weighs Oz". It is within ...
  A: starting price $5 reserve price $150 Actually, I usually dont use a reserve since that discourages ...
Granger Vicorty Rod11/17/2009
  Q: I have a "Wright %26 McGill Granger Victory Rod Number GV.9660, Length 9' weighs Oz". It is within ...
  A: Wright and McGill is a fishing tackle company dating back into the 1920s. To improve their product ...
orvis pack rod full flex11/16/2009
  Q: I unpacked my father's fishing gear after 30 years in my basement and discovered an Orvis pack rod ...
  A: Barbara these come in a variety of sizes and models. Orvis sells/sold high end fishing equipment. ...
Metal Telescopic Fly Rod11/6/2009
  Q: I have my Grandfathers 3 section telescopic fly rod,the line goes through the rod.There is no name ...
  A: Kevin, I am not sure of your question. The telescoping steel rods generate low collector interest. ...
horrock-ibbotson fly rod11/3/2009
  Q: I was wondering how much this fishing set may be worth i inherited it from my grandfather. It was ...
  A: Danie Normally I would say that the tackle has minimal value since they made low to medium quality ...
old flyfishing reel10/28/2009
  Q: I have a old fly reel and cant seem to find anything on it on the back it reads wolverine no 1695 ...
  A: Larry, I am sorry for the delay in answering. Kalamazoo was a fishing tackle company from Kalamazoo ...
antique st croix pole10/26/2009
  Q: my brother came across an old st croix pole. it is a st croix pole from around 1964. it is short and ...
  A: I am not sure of your specific question. But, they did make a combination rod & reel. The rod ...
Vintage Fishing Rods...10/23/2009
  Q: I recently came across 2 vintage fishing rods. The only information on the rods is a sticker that ...
  A: J, I am not familiar with the name, if you can send some photos, I might be able to help. From a ...
split bamboo antique fly rod10/14/2009
  Q: I have a split bamboo rod made by my great-uncle, Calvin Holmes (Berkely, CA), signed for my ...
  A: Greg, I applogize for the delay. For considerations, I would recommend building a basic shadow ...
Shakespeare reel10/13/2009
  Q: Want to know the value of a Shakespeare Level Wind, Model FC, No. 1870 Spin Wondereel
  A: Ben this was a lower cost, high volume fishing reel. Unfortunately, they are fairly common, mint ...
jc higgins reel10/13/2009
  Q: can you give me any info on jc higgins model 47c reel it is in good shape.
  A: Mike JC Higgins (Sears) didn't make reels, but purchased them from Shakespeare, Bronson, Penn and ...
south bend finalist 112210/10/2009
  Q: and whereis it from usa japan? regards jan from sweden.
  A: Jan I am going to recommend a site dedicated to fishing reels - please search "ORCA Fishing Reels", ...
Hurd Reel10/5/2009
  Q: I have a Hurd rod Super Caster and reel with the # 49758 on the bottom side of the reel. It is ...
  A: Jim I would post in two locations Joes Fishing Lures http://www.joesoldlures.com/wwwboard/ ORCA ...
bamboo fly fishing rod10/4/2009
  Q: i fish myself and one of my friends has told me it is valuable, i dont want to sell it i just want ...
  A: Hector, Hardy made fine quality fly rods. Your rod is collectible and has value. It will depend on ...
Fly Rod.9/29/2009
  Q: Model 1686 Action Rod HCH-D Line. I am looking for more info on this such as era, worth, maker, ...
  A: Derrick is there other markings on this rod. There is an old Action Rod made by Orchard Industries. ...
Pfleger Capitol Reels9/28/2009
  Q: I have two Plueger Mod 1985 Capitol Reels in excellent condition. How can I tell when they were ...
  A: Rich your model was made from 1935 thru 1959. The reel its self doesn't generate a lot of ...
Vintage rod and reel9/27/2009
  Q: I am trying to identify the approximate value of my D.A.M Quick 221 Model reel. It has the fish on ...
  A: Tim, This is a good quality spinning reel that runs in the $15-30 range depending on condition. The ...
value of coarse fishing rods9/25/2009
  Q: 1 is a hardy fibreglass 1970s 13foot six inches coarse rod excellent condition.The other is an ...
  A: Ken the Hardy rod definitely has value, but its out of my expertise, this is a good website for fly ...
South Bend Oreno 10009/24/2009
  Q: My dad has a South Bend Oreno 1000 fishing reel with the original box and Care Instructions with it. ...
  A: Kathy Fishing reel prices relate to the quality and rarity of the reel. The high quality reels were ...
info about a poss. antique reel9/23/2009
  Q: i have a stream and lake model # 88a,made by wright and mcgill and i want to know if its worth ...
  A: Joel, Fishing reel value follows the original cost and volume of the reel. (ie rare reels that cost ...
fishing rods9/21/2009
  Q: I bought these two rods from a guy the other week was wondering if you knew there worth. They are ...
  A: Dallas I appologize for the delay in answering. Surf rods are a little out of my expertise. But I ...
Old Zebco spinners Rod and Reel matched sets9/19/2009
  Q: I bought 2 Zebco rod and reels several years ago at an estate auction. The rod still has original ...
  A: these are fairly common fishing items. Zebco made low cost affordable fishing tackle - in high ...
fishing rod9/18/2009
  Q: Just came across a rod called Action Rod (Action Glas) Model # 150, made by Orchard Industries, in ...
  A: Chet, I would expect your rod to get about $75, you might do better because of the bag and original ...
Wards Thorobred Bamboo Fly Rod9/17/2009
  Q: I own a 3/2, 9' Wards Thorobred Bamboo Fly Rod in execllent condition. One tip has agate tip top, ...
  A: Rudy here is a good website to get information on the maker (probably a company like Horrock ...
Fishing rods9/17/2009
  Q: Sir, some time ago I lived in an old house in Bordentown,NJ..when I moved I was cleaning out ...
  A: Larry depending on condition these rods would run in the $10 to $50 range. Note: condition is ...
South bend fly fishing reel9/11/2009
  Q: I just bought from ebay 2 south bend fly fishing reel. - south bend finalist 1122 - south bend ...
  A: Pierre, Interestingly, Shakespeare made most of the reels sold by South Bend. They are late 60s - ...
Lee Wullf ultimate reel by farlow9/10/2009
  Q: I have a salmon or salt water fly reel given to me, it was from Norm Thompson outfitters in about ...
  A: Lee There is a lot of speculation about these limited production reels (few hundred made?). ...
Horrocks Ibbotson No. 181 Salt Water Reel9/7/2009
  Q: I have a reel that looks new, or near new. The reel has the H-I logo. The box describes it as: ...
  A: Ron Fishing reel values today relate well to their original cost. The high quality, expensive reels ...
What do I have?9/7/2009
  Q: I have obtained a sport king bamboo fly rod still in the sock it was sold in.it has two tips and one ...
  A: Sports King was sold by Montgomery Ward. Unfortunately, your it appears one tip as been ...
pflueger fishing reel9/6/2009
  Q: trying to find out about pflueger baitcasting reel "TRUMP"TRADEMARK 1943 WITH
  A: Doug, Pflueger (pronounced flew-ger), was one of the big 5 fishing tackle companies dating back ...
Old rods and reels9/5/2009
  Q: I purchased 2 old rods & reels at a garage sale. I'd like some info on them. The rods are both 55" ...
  A: Robert, True Temper, Ocean City, and Mohawk made low end affordable fishing tackle. Your rod and ...
fenwick 12' feralite9/4/2009
  Q: also on the rod is the fenwick emblem of course and the numbers-K111426 PS120 US patent 3.186 122 ...
  A: Your rod is a surf rod, made in the 1970s I believe. They sold in the $70 range. Fenwick makes high ...
J. C Higgins real8/31/2009
  Q: I have a never used with box that says sears, roebuck and co, and simpsons-sears limited. The reel ...
  A: Jason, these reels are at the lower end of the collectors value since they were mass produced, and ...
cane fly rod8/30/2009
  Q: would like info and value on Elephant Brand cane fly rod. 9' says Elephant Brand on label, shws red ...
  A: Wayne, I recommend checking at this site: ...
vintage fishing rod8/29/2009
  Q: i have a old rod it says garcia companion 2668 and it is blue with a wooden handle and i would like ...
  A: Cabelas has a good assortment of replacement guides. I cant tell you the size, without having the ...
Value and information on a rod.8/28/2009
  Q: I have an old rod made by Harry Hobson of Lyons, Oregon. Is it valuable and was Harry Hobson a ...
  A: Kim I am going to recommend this site, since its a bamboo fly rod: ...
Farlow bamboo8/27/2009
  Q: I have a Farlow Sharpe 6 ft / 2 piece "The Midge" Serial number stamped in the butt cap 83165. Also ...
  A: I believe your rod is English (British). I recommend this site to get a good appraisal ...
Value and information on a rod.8/26/2009
  Q: I have an old rod made by Harry Hobson of Lyons, Oregon. Is it valuable and was Harry Hobson a ...
  A: Kim, I am not familiar with this rod. Can you tell me the material - bamboo, steel, fiberglass, and ...
is this a vintage rod?8/25/2009
  Q: a friend of mine just gave me a willie green rod #55-682-58 custom built in 66,could you give me any ...
  A: Jesse, Can you provide more details on the rod - baitcasting, spinning, etc. I suspect its one of ...
WINCHESTER POLE &SHAKESPEARE REEL8/24/2009
  Q: CAN YOU TELL ME HOW OLD THIS POLE AND REEL ARE. THE POLE AS WINCHESTER TRADE MARK MADE IN USA #6009. ...
  A: Donald, the fishing reel is from the teens thru the 20s. They are fairly common and run about ...
Jack frost value8/22/2009
  Q: They are two Jack Frost 9 foot Bamboo fly rods with extra tips in a cloth case. I also have deep sea ...
  A: Lindsey, I think the Frost flyrods run about $50. I believe these were made by Montague. But I am ...
fishingrod/reel8/21/2009
  Q: I have a unit made by great lakes products of Detroit MI.rod&reel are all one pice.seen it years ago ...
  A: The Great Lakes Whirlaway rod/reel combination is collectable. On the early version, the handle ...
Bamboo poles8/19/2009
  Q: My father has a bamboo fishing pole with three pieces, 9' with a steel case. He thinks it was ...
  A: Without knowing the maker of the rod, it will be difficult to determine the value. The fact that it ...
Wonderod with Great Lakes enclosed reel8/18/2009
  Q: The number on the rod is 1560XL initials FDK. The reel is enclosed spinning rod with the line coming ...
  A: these were made in the 40-60s...the thumb button is the release for allowing the line to feedout. ...
OLD ROD AND REEL8/16/2009
  Q: A FREIND RECENTLY GAVE ME A OLD PUSH BUTTON REEL THAT IS A GREAT LAKES HOLIDAY 98. STILL CRANKS AND ...
  A: Buck Great Lakes was a medium to low end fishing tackle company. Their value is at the low end of ...
Wright & McGill Fly Rod8/16/2009
  Q: Robert, I recently purchased a Wright & McGill Fly Rod With a South Bend 1122 reel. The fly rod has ...
  A: Andy, If your rod is split bamboo, it the bamboo should have 6 sides to it. Condition is very ...
Milward's fly rod8/16/2009
  Q: Where can I buy or find a Milwards bamboo fly rod to match a Milwards flycraft junior reel? Iv'e had ...
  A: Paul, I see one for sale on ebay, but you can also try this site dedicated to flyrods: ...
Mitchell fishing reel8/11/2009
  Q: I am attempting to accurately date a Mitchell spinning reel I have. The serial number is B03005 it ...
  A: Doug, I believe your reel is 1940s or early 1950s. But, there is another site that has better ...
Date & value of rod8/9/2009
  Q: Hey Robert I just stumbled on this site.I was looking to date a rod I have & maybe give aprox value. ...
  A: Micheal I am going to recommend another site, this site will recommend posting photos. Also, does ...
old reel and rod8/7/2009
  Q: I have a old martin fly reel #60 and a bamboo fly rod with four differnt tips the sticker on the ...
  A: Randy based on your description it sounds like an occupied Japan flyrod. These rods run in the $20 ...
value of fly rod8/1/2009
  Q: I found a early model airflex graphit fly rod. From its appearance it has never been used and is ...
  A: Jeff I dont think your rod has much collector value, maybe 20-40? But, another site to contact ...
SOUTH BEND7/28/2009
  Q: I have a No.800 South Bend Smooth Cast Direct Drive reel, I have been on various sites trying to ...
  A: Ryan your reel is probably from the 1950s. Unfortunately these reels were made in significant ...
any info on a dickson telescopic pack rod7/26/2009
  Q: ... I was at an estate auction and I bought whatever would happen to be in the top of an old ...
  A: Kathlene, these rods dont generate much interest from collectors. Collectors are mainly interested ...
Great Lakes Whirlwind Rod/Reel Combo7/25/2009
  Q: How old and how much could this be worth. It is in excellent shape it's missing one winder knob on ...
  A: Tony there were two models, on the early version the handle moved in a slot from the side to the ...
Miltex FLR-2 fly rod7/24/2009
  Q: I have a Fly fishing rod . It looks like fiberglass. It is 3 pcs. It has MILTEX FLR-2 on a sticker ...
  A: Doug, the main interest in fishing tackle is American made, in addition there is more interest in ...
Mitchell 300 DL Reel, Serial # D1621067/23/2009
  Q: I have been trying to find out the value my Mitchell 300 DL reel dated June 17 1974. It is in mint ...
  A: Jon I am going to recommend you post this on the Orca site, you will get a better valuation. I am ...
What is the value?7/23/2009
  Q: I have a heddon #14 thoroughbred 8.5 2f in nearly mint cond. three piece, extra tip cloth sack and ...
  A: Chris your description as all the right elements, condition, extra tip, sack and tube. I am going ...
VINTAGE REEL ?6/17/2009
  Q: HANDLES NO MARKINGS EXCEPT ARNOLD PALMER IN BLACK AND GOLD STICKER.IT WAS ON A CHILDS POLE WHEN I ...
  A: Clancy I dont have a lot of background with this specific reel. So I am going to recommend this ...
bamboo fishing pole6/15/2009
  Q: i have an antique fishing pole. it is bamboo because it was made before 1949. it is a shakespear and ...
  A: Cody, I am not sure what your question is. Shakespeare was a fishing tackle company based out of ...
4 fishing reel's like to know values and #r's6/13/2009
  Q: the first one is a Pflueger Akron this is located on the right side of the baitcaster surrounded by ...
  A: the Pflueger and Shakespeare reels are common, middle of the line reels in their day. They run $5-10 ...
ocean city 906/11/2009
  Q: I Have a fishing rod with the only readable markings on it is conolon live fiber 2904 and the reel ...
  A: Wade Ocean City was one of a number of middle quality fishing tackle manufacturers in the US. Best ...
old rod i bought at sale6/8/2009
  Q: Culver Duo-Loc midwest aircraft prod. inc Daton Ohio pat. appld for its 5 ft blue rod with a quick ...
  A: I am checking with some fellow collectors. I can tell you, there were many manufacturers that made ...
old fishing rod6/5/2009
  Q: About 15 to 20 years ago I bought a fishing rod at an estate sale.. it had a sticker that said ...
  A: This sounds like a split bamboo flyrod made by Shakespeare, Kalamazoo Michigan. I cant tell from ...
Hardy uniqua fishing reel6/1/2009
  Q: I recently purchased a Hardy fishing reel that states patent uniqua reel with an plaque on it ...
  A: I believe most of these were made in the 20s and 30s. They normally run in the $150 - 200 range. ...
vintage fishing pole5/31/2009
  Q: I bought a fishing pole at a garage sale and the man that sold it to me said it was a tonkin cane ...
  A: Wards carried the lower end quality fishing tackle. Which translates into the value of the rod you ...
All Star Telescopic Fishing Rod5/31/2009
  Q: Can you tell me the age of this rod? It is steel, black in color, three guides, cork handle and is ...
  A: Linda, Richardson made some of the nicer of steel rods prior to WWII - probably the 1920s or 30s. ...
St. Croix Fly Fishing Pole5/29/2009
  Q: I picked up an old rod & reel from a yard sale for $3.00. The name on is St. Croix , and reads ...
  A: Tricia, these rods run $10-$15. Most were made in the 1970s. These rods were low end in quality and ...
old Jc Higgins Jointed Lure5/28/2009
  Q: i have been fishing since i was like, 3, i am now 16, and for several years i have had my dad's old ...
  A: Glass eyes were made in Germany, thus as WWII hit, the eyes where changed to metal tacks that were ...
Older rod/reel5/28/2009
  Q: Greetings, I have an older rod/reel. The reel is a Heddon 112 in nice shape, fully functional. It ...
  A: Chris can you send a photo of the reel, I am not sure of the 112, is there additional markings? ...
H & I Rod5/28/2009
  Q: I have an H & I Co. 5' casting rod in excellent condition. It has the "trout" decal, #206, Power ...
  A: H&I stands for Horrocks Ibbotson. Unfortunately, the collector interest is in the split bamboo rods, ...
Great Lakes Whirlaway5/27/2009
  Q: There was a Great Lakes Reel/Rod combo that the crank was pushed up into the reel casing after the ...
  A: Judy, there are two places to check 1. ebay (under sporting goods, fishing, vintage) 2. post a ...
old Jc Higgins Jointed Lure5/26/2009
  Q: i have been fishing since i was like, 3, i am now 16, and for several years i have had my dad's old ...
  A: Ray JC Higgins lures were made by other companies, Creek Chub, South Bend, etc. With the limited ...
Sears 8' red fiberglass fly rod5/23/2009
  Q: I have a sears fiberglass fly rod it is 8ft long. The rod is red with black and yellow threads. 8 ...
  A: Justin, I would recommend a 5 or 6 weight line. They are very versatile for trout, bass, pan fish. ...
Steel Fishing Rod5/22/2009
  Q: I came across a steel Rod while in Fla. It is a action rod made by Orchard Industries Detroit Mich. ...
  A: This is a fairly common rod. It was patented by a guy named Carlson in the 1930s. The patent ...
fly fishing rod5/17/2009
  Q: I have a I-H rod its made from tonkin cane and says beaver hill on it its a 3 piece rod no other ...
  A: I believe your rod is an H-I rod, which stands for Horrocks Ibbotson. The company was incorporated ...
Sears, Roebuck & Co Mohawk Casting Reel5/16/2009
  Q: I came across a Sears, Roebuck & Co Mohawk Casting Reel,Level Winding, No.3111. That I'm guessing ...
  A: Unfortunately this reel was a low cost high production reel in its day. They are very common to find ...
saltwater rods5/14/2009
  Q: I have an old fishing rod which is apparently a saltwater rod. It is approximately 6 feet long with ...
  A: Steve I would think it depends on what your fishing for. I would guess 15 lbs or heavier. It would ...
cisco kid5/12/2009
  Q: do you feel that cisco kids are very collectible and do you think the value will increase in the ...
  A: Yes they are collectible. Certain models and colors are more desirable than others. I would focus on ...
J.C. Higgins fly reel5/11/2009
  Q: I recently inherited my grandfather's old fly rod, a two-piece rod in nice shape with a green label ...
  A: Dave Your rod is probably made in the 1930s thru early 50s. These old bamboo rods have a tendency ...
fenwick glass rod5/9/2009
  Q: I have a beautiful Fenwick j148510 glass rod that was my mother's...would like to know if it is ...
  A: Holly, Fenwick rods are high quality rods made for some time. The fact that your rod is in new ...
fishing rod5/8/2009
  Q: and it says that the rod is a number 59. The rod in the bag is a Three part pole with and extra tip. ...
  A: Your fly rod is considered a high production, medium quality rod. (As compared to a custom American ...
Johnson reels5/7/2009
  Q: Did Johnson come out with a heavy duty reel?
  A: Joe I am most familiar with their pan fish closed face reels. So I am going to recommend a site ...
antique rod and reel5/4/2009
  Q: i have a great lakes '75' whirlaway rod and reel. it's a 5ft rod. the reel is an open face encased ...
  A: Chuck sorry for the delay. Great Lakes made an intergrated rod and reel combination. Depending on ...
Leather Fishing Bag5/1/2009
  Q: Here is a goood question. Hi I have a good question for you. This belong to a friends Grandfather ...
  A: Lisa You have me stumped on this one. Usually leather tackle boxes tin with leather wrapped around ...
lefty by ranger #74 reel and heddon rod4/26/2009
  Q: Robert I picked up a lefty reel made by ranger #74 on a Heddon split octagon bamboo pole no # on rod ...
  A: Paul Ranger reels were low cost reels in their day. Thus they dont command the prices like the high ...
Old Fly Rods4/23/2009
  Q: We found two old Fly Rods of my Dad's. One is a True Temper Speedlock with a Ivory handle and it's ...
  A: Kay The main interest/high value are for custom, American made split bamboo fly fishing rods. Value ...
OLD FISHING ROD4/22/2009
  Q: MY BROTHER FOUND AN OLD SQUARE ALUMINUM FISHING ROD POLE WITH CORK HANDLE,SPEEDLOCK MADE IN GENEVA, ...
  A: Cindy, the main value/demand for rods is for American, custom made split bamboo fly rods. Steel ...
fishing reel4/21/2009
  Q: I am going thru my dads fishing boxes,because he recently passed away and has south bend caisting ...
  A: Gary Interestingly, Shakespeare made the South Bend Reels as well as the Shakespeare reel. ...
FISHING REEL4/14/2009
  Q: I RECENTRY PURCHASED A FISHING REEL AT AN ANTIQUE SHOP AND WOULD LIKE A LITTLE INFORMATION ABOUT IT ...
  A: can you send me a photo, I dont recognize the name specifically. It sounds like a low cost trade ...
bristol fishing poles4/13/2009
  Q:
  A: Lucas I am sure your trying Ebay? They come up there a lot, but as you said they are usually rough. ...
garcia conolon rods4/12/2009
  Q: I apologize for having to ask a question but I can't find any answers and I was hoping you could ...
  A: Curtis not sure exactly what your looking for, they are good quality fiberglass fishing rods used ...
reels4/12/2009
  Q: I have a miles bay # v7355 reel who made it and dates
  A: Leon, Here is info posted on the ORCA fishing reel website: Miles Bay was one of the trade names ...
Shakespeare Spin-Wonderod4/12/2009
  Q: "Hi Robert... In 1954 my father sold out his Sporting Goods business in Sandy Lake PA., and moved ...
  A: Benny, I will do some checking, I don't know the specific rod your looking for, although I am ...
Heddon Pal fly rod4/10/2009
  Q: I just came across a fly rod on which I'd like some information. So far, I've had no luck finding it ...
  A: John, I apologize for the delay in answering. I am not sure specifically what your looking for. ...
south bend reel4/7/2009
  Q: can you tell me when a south bend B22 finalist fly fishing reel was made
  A: Dave, sorry for the delay, I thought I had sent and answer already. I am going to recommend ...
OLD WOODEN ROD AND REEL COMBO4/2/2009
  Q: REEL HAS PELUEGER,,CAPITOL,,TRADE MARK,NO.1989,MADE IN USA,THESE ARE THE MARKINGS. A STAR REEL DRAG, ...
  A: Jay, I am assuming your asking for a value? The Pflueger fishing reel is a fairly common ocean ...
Johnson Century fishing reels4/2/2009
  Q: I have purchased two Johnson Century reels recently. One is a Model 100B. The other, I am not sure ...
  A: I am guessing the rod that moves the spool forward and aft may be mis-assembled. I don't have one to ...
Fenwick rod3/31/2009
  Q: Any information you could give me about it would be appreciated. Jon
  A: John Fenwick makes very high quality rods, they generate demand for both people to fish with and ...
Ambercrombie fitch rod3/29/2009
  Q: Do you know anything about an Ambercrombie and Fitch fishing rod? Fiberglass, 10 piece in a 6"x4" ...
  A: Tim, Your date sounds about right, it was a travel rod (thus broke down into 10 pieces). I would ...
Fishing reel3/25/2009
  Q: I recently acquired an abu ambassaduer 5000c serial number 36728 in red and am curious about ...
  A: Without any further information probably about a $30-$40 reel. If you have the original box, etc. ...
South Bend rod and reel3/24/2009
  Q: I have a South bend bamboo fly rod and reel that belonged to my father. The rod is a model 640, the ...
  A: Harry the value of your rod will depend on the condition and completeness. Does the rod have both ...
kiraku fishing reel3/23/2009
  Q: i have a 1942 fly fishing reel..i need the home office of kiraku and co,inc. thanks
  A: Leslie, I am not familiar with this reel company or if they are still in business. but if you ...
vintage fishing reel3/22/2009
  Q: I have 4 reels I would like to get an approximate value? 1st: Pflueger Summit 1993 Very good shape, ...
  A: Fred all of these are very common fishing reels - high production in their day. They are in the ...
orchard industries fly rod3/21/2009
  Q: I was wondering what my grand-father's "brand new" orchard industries model 1686 glas rod 8'6 in ...
  A: Tim, Most of the orchard industry rods run in the $30-$40 range. Yours sounds near mint, if so it ...
Garcia Rod and Heddon rod3/14/2009
  Q: I have two vintage rods I would appreciate some info on value. Early 1960's. 1) Garcia Conolon ...
  A: Fred my apologies for the delay in response. These rods are above average quality rods in their ...
Ice Fishing Jigger?3/12/2009
  Q: Good Afternoon Robert, I acquired this heavy wire fishing device about 6 months ago and I believe it ...
  A: George I agree, a very primitive ice fishing rig. Unfortunately, I cant tell you who made it, ...
Old fly rod, signed by Frank "Muddy" Waters2/25/2009
  Q: I picked this up at a second hand store in Lansing, MI. it says the usual, Heddon pal pro ...
  A: Todd I am sharper on lures and reels so I am going to send you to this site: ...
MONZA REEL2/23/2009
  Q: i have a older monza spinning reel part #31322 its made in japan its blue and black . i cant find ...
  A: Arthur, I am not familiar with this reel, I suspect its a low end reel, so probably not worth much ...
old fly pole and reel2/18/2009
  Q: I have a octagon metal fly pole with a sears and roebuck real,,pat no 2-175-756 can you tell me ...
  A: Lela metal flyrod - in general these rods are in the $5-20 range depending on condition. An ...
antique rod???1/16/2009
  Q: Please review these photo's and let me know if you know anything about this rod. Thanks, Susan ...
  A: A collector is interested in your rod, please provide your email address if your are interested in ...
Zebco model#551/8/2009
  Q: I have about a thousand questions for you but I will keep it to just a few for now. I have a Zebco ...
  A: Zebco 55s run in the 15-20 range, with the box, I would expect it to maybe double, but sounds like ...
Lawrence "sunbeam"1/5/2009
  Q: Robert I have recently inherited a Lawrence "sunbeam" single action fly reel Model No. 150-R. I ...
  A: I believe this is a lower quality post WWII reel, I have seen them for sale in the $10 range, yours ...
South Bend Bamboo fly rod 32312/27/2008
  Q: I have a South Bend Bamboo fly rod with bag,metal tue and extra tip. It is #323 and is 8ft.All ...
  A: Howie, I think the answer is yes, but I recommend posting a question at this web site: ...
south bend reel12/25/2008
  Q: I have a south bend 1115 fly reel...what is it's age and value..it is pretty crisp, with slight ...
  A: The reel is from the 504/60s. They are at the low end of collectable fly reels - it was a high ...
vintage lure12/14/2008
  Q: Robert, Do you know anything about this lure and the people who made it? Thank you for your time ...
  A: Brad, I think its one of many small lure companies that made a limited number of lures. There are ...
vintage lure12/13/2008
  Q: Robert, Do you know anything about this lure and the people who made it? Thank you for your time ...
  A: Brad I would probably put around $175, lure prices are really down, but your lures condition and ...
vintage lure12/5/2008
  Q: Robert, Do you know anything about this lure and the people who made it? Thank you for your time ...
  A: Brad Nice lure/box combination. This is a Medleys Wiggly Crayfish...as it says on the box. They ...
lure identfication12/4/2008
  Q: can you tell what lure this is? The wood body is 3 5/8" see through body hooks. Can send more ...
  A: Mark, This is a lure made by Shakespeare. Its a #44 underwater minnow, collectors call this style ...
HURD SUPERCASTER REEL12/3/2008
  Q: ANYWAY I AM WANTING TO BUY ONE SO I WANTED TO KNOW IF YOU KNEW OF ONE FOR SALE OR IF ANYONE READS ...
  A: here is a good place to inquire about purchasing a hurd super caster: ...
Harhell Fishing Rods12/1/2008
  Q: Robert, I recently came across a Harnell #756 rod. It is in brand new condition still in the ...
  A: I think my estimate is still correct. Note: its probably worth more as a fishing rod, than a ...
Antique Pole.11/26/2008
  Q: Hey Robert, I purchased a pole several years ago and I have been unable to find out anything about ...
  A: Jeff In the late 1800s, fisherman would attach a lure to the end of a long rod with a relatively ...
value of fly rods11/25/2008
  Q: My father has several old fly fishing rods and was wondering their value. Two are split bamboo, one ...
  A: Kathy Here is a great site to get an appraisal: ...
Shakespeare Bamboo Fly Rod11/23/2008
  Q: I have a Shakespeare Split Bamboo Fly Rod Truimph No. A1305T. 8 1/2 ft. trout weight. Made in the ...
  A: Positives about your rod - split bamboo, mint condition with both tips, its American (vs. Japaneese) ...
Hardy's Rod10/17/2008
  Q: I have inherited a Hardy's rod from my grandfathers estate. I have consulted a work college who has ...
  A: Grant, I am more knowledgeable about bass fishing tackle. There is a very good website for fishing ...
Zebco 33 reels10/17/2008
  Q: What year was the first Zebco 33 reel produced? And is there any way you could post a picture of the ...
  A: I am not a zebco expert but I believe the first 33 was in 1954 or close to that. There is a really ...
rods10/11/2008
  Q: i have 2 heddon pal pro weight rods one fly 7' #8381 one 6'7"spinning #7423 also eagle claw ...
  A: All of these rods run in the $15-$40 range depending on condition completeness and packaging. The ...
1962 Martin M81 Fly Reel10/7/2008
  Q: Boxed with instructions. Bought in 1962. Is there a value here for resale? Thank you...
  A: At this time Martin fly reels value is basically the same as it would sell for used fishing ...
1950's Spinners & Lures10/1/2008
  Q: Around 1956-57, I used a small treble hook spinner called a "Metal Fly" in California. It came in ...
  A: I am not familiar with the bait your mentioning. Note: there are thousand apon thousand of small ...
Hurd Supercaster #548499/27/2008
  Q: I have a Hurd supercaster #54849,it has it's own leather carrying case which is in excellent ...
  A: The Hurd Supercaster was manufactured in the late 1940's by Hurd Lock & Manufacturing Co., of ...
antique fishing lures9/24/2008
  Q: I have some antique fishing lures that I have been trying to figure out where some of them came ...
  A: Sorry for the delay, I missed the question notice in my email... Hello you have a nice group of ...
HI plugs9/23/2008
  Q: Robert, Thanks for your help in advance. I've got a number of Hi Fishing Plugs. They're labeled Hi ...
  A: Mike I am going to do some further checking....the fact that they are un-used in the original ...
HI plugs9/23/2008
  Q: Robert, Thanks for your help in advance. I've got a number of Hi Fishing Plugs. They're labeled Hi ...
  A: Mike If you can send a photo, I might be able to help more...HI was around for a long time, but the ...
hiawatha copper telecoping pole9/20/2008
  Q: my grandpa gave me an old Hiawatha telescoping fishing pole. Its made out of copper and opens to 8 ...
  A: Joe, it sounds like an old fly fishing rod. Typically these rods run in the 10-$50 range. With $50 ...
Wright & McGill "Trailmaster" 7 1/2' No. 4TM9/17/2008
  Q: In question is a Wright & McGill "Trailmaster" fishing rod that is labeled 7 1/2' long with "No. ...
  A: I would estimate $40 if the rod is in excellent condition. If the rod is not near mint condition, ...
W&M Fly Rod9/15/2008
  Q: I have a W&M fiberglass rod On the rod are the words Toughy, TYS 6 !/2 and Wright & McGill, any ...
  A: sorry for the delay got power back today after remmants of Ike came thru our area on Sunday. ...
identifing an old pole and possible value9/14/2008
  Q: I have an old spin casting pole that is made out of stainless steel about four feet long with only a ...
  A: I just got power back today after the remnants of Ike came thru. There are litterally dozens of ...
Antique rod with built in reel.9/12/2008
  Q: A friend of mine asked me to research the value of his antique rod with built in reel, in ...
  A: Kathy I cant see the entire rod but appear to be "good" or 5/6 out of 10, but I would estimate in ...
fishing rod9/8/2008
  Q: I have a two piece 6ft solid fiberglass Mohawk fishing rod, it has No. 25 46 on the decal with H.I ...
  A: Roy Unfortunately your rod as a collectable is worth $5-10. Horrock Ibbotson (H.I.) made medium to ...
fly rod9/7/2008
  Q: My grandfather recently passed away.Going thru his fishing tackle I came across a 1938 Wright&McGill ...
  A: Shawn As you have probably determined, W&M bought out Granger to enhance their line of fishing ...
Hardy Rods8/30/2008
  Q: I was wondering what the approx value would be on a Hardy Bros. bamboo rod. Its serial number puts ...
  A: John Rod collectors are primarly interested in custom made or high quality production fly rods. ...
Hardys fly rod8/27/2008
  Q: I have a hardys fly rod passed down to me from my grandfather. I was wondering what its value is and ...
  A: unfortunately the length of this rod hurts it, if its in excellent condition and complete it might ...
fishing rod and reel8/26/2008
  Q: My grandfather has left me a Glasscaster rod by WALTCO and a Johnson centry model 100a reel. Could ...
  A: A Johnson Century 100 is a closed face spin casting reel, probably made in the 60s or 70s. ...
old fishing rod8/26/2008
  Q: I have an old fiber glass pole.it is a 2 piece.It has sears and roebuck on the shaft by the ...
  A: Dave I cant tell the type of fishing based on your description but from a collectors standpoint the ...
edgar sealey & sons LTD. reel8/23/2008
  Q: have come across a edgar sealey & sons LTD. red diamond super No. 12000 spinning reel in our garage ...
  A: I am sorry, English fishing reels are out of my expertise, but there is a website dedicated to ...
Penn Peer Nr.209 fishing reel8/14/2008
  Q: I need what we call in german an "Explosion Plan" (a graphic drawing of the parts) of the Penn Peer ...
  A: Franz I dont have this item but there is some information here: ...
eagle claw fishing rod value8/13/2008
  Q: I have a never used eagle claw granger ocean spinning rod. model No. GO 200 - 8 1/2 ft.Wright & ...
  A: Some history Goodwin Granger made custom split bamboo flyrods until just after WWII. Wright & ...
antique bamboo fly poles8/9/2008
  Q: I came across an old 8-10ft.octagon bamboo fly pole in excelant shape , total of three pieces , 9 ...
  A: Dennis, I am not sure of the maker of the flyrod - can you send me a clear photo of the marking? ...
Old fishing poles8/9/2008
  Q: I just dug out my grandfather's old fishing poles. They seem to be from the 50s - 60s. 2 are made ...
  A: Dan, Its hard to tell what form of fishing your equipment is made for. Usually, surf fishing rods ...
Vintage Hardy Fishing Rod8/8/2008
  Q: I inherited a vintage Hardy fishing rod from my grandfather. It is a fly rod in 2 sections. Each ...
  A: It will be tough to provide a value with this description. It sounds like its a fiberglass flyrod. ...
fishing rod8/6/2008
  Q: It is 57 inches tall,has a cork handle, a medal butt, and a medal shaft. It also has some sort of ...
  A: Metal rods generally do not generate much value - $10-$20. Your rod is probably 20s or 30s based on ...
Old fishing rods8/5/2008
  Q: I have a 5 foot copper fishing rod, made by True Temper. It is the Castmaster model. Any info on ...
  A: True Temper rods typically run in the $20-$30 range. In general fishing rod collectors focus on ...
REELS8/3/2008
  Q: Can you tell me what year they were made and if they are worth anything.The 1st is a Southbend ...
  A: I beleive your reels are made in the 1960s/70s. The South Bend Spin Cast 700 reel in mint condition ...
Zebco Zero hour reels7/22/2008
  Q: Is there a value difference between the reels that have a tan ,red, or black spinnerhead?
  A: Randy I believe your talking about the Zero Hour Bomber - predicessor to the Zebco 33, etc. I am ...
fishing rod7/20/2008
  Q: had a split cane rod left to me. around the bottom of the rod it says firecrest forshaus liverpool ...
  A: I am doing some more research on your rod. At 12 ft long, I suspect it might be for skittering - the ...
fishing rod7/19/2008
  Q: had a split cane rod left to me. around the bottom of the rod it says firecrest forshaus liverpool ...
  A: I need a little more information. Is this a split bamboo? Will have a hexaganal shape from 6 ...
MATCH brand reels7/16/2008
  Q: I recently purchased an old spincast reel from a antique mall with a brand I have never heard of. It ...
  A: Unfortunately I am not able to further identify this reel based on your description. Japan produced ...
granger rod7/11/2008
  Q: I HAVE A WRIGHT MCGILL GRANGER NO.SEA 8 ROD ROD IS IN VERY GOOD CONDITION ANY INFO.WOULD HELP ...
  A: Goodwin Granger started making rods in 1919, 1920 time period, making high quality flyrods. Granger, ...
great lakes 75 fishing rod7/9/2008
  Q: I have a great lakes 75 and was wanting to know how old it is and what is worth?
  A: Sorry for the delay in response - just back from vacation, I need more information about your item. ...
whirlaway7/6/2008
  Q: I have a whirlaway in very good condition.It is the one where you move the handle in the rear to ...
  A: sorry for the delay, I am just back from vacation. The model you have is the earlier version I ...
japanese fly rod6/22/2008
  Q: I was recently gifted a post WWII fly rod/spinning rod combo from Japan. It is in excellent ...
  A: Your Japanese flyrod/spin rod combination is at the lower end of the collectors interest. Flyrod ...
Very Old Brass rod6/17/2008
  Q: At an estate sale I bought a fishing rod like I had never seen before. It is all Brass and ...
  A: Please send photos to fivermillions@cinci.rr.com (also any fishing lures you might have) I will ...
Heddon Pal rod6/16/2008
  Q: My father just received a Heddon Pal #130 spinning rod, 6 1/2 ft, new never used, no damage/dings/no ...
  A: Heddon Pal rods run in the $20-$60 range generally, depending on condition. Flyrods command more ...
split bamboo rods6/11/2008
  Q: I have a bamboo rod in a wooden case from the company of Kiraku&Co.,Inc. from Tokyo, Japan. On the ...
  A: Gail Collectors are mainly interested in American made flyrods with custom built versions ...
Higgins Fly Rod6/8/2008
  Q: I have an old Higgins 2969 fly rod in great condition, just wondering the worth or demand. Thanks
  A: In terms of collectors interest and value here are some guidelines American Custom/hand made rods - ...
Tonkin Cane Rods6/5/2008
  Q: I have recently picked up at a Craigslist sale 3 flyrods all cane. I would love any information you ...
  A: Gail, Split Bamboo flyrods are not my best topic - here is some general information I can provide ...
copper rod?6/5/2008
  Q: While cleaning out an old garage I came across a one piece 7' 4" copper rod. At least I think ...
  A: There were rods made of hollow and solid steel, and hollow copper. Without a maker it would be tough ...
antique rod n one piece, great lakes products inc5/25/2008
  Q: i have what appears to be a rather old one piece RnR. tear drop shaped from GLP inc. Patend ...
  A: Great Lakes made an intergrated rod and reel combination. Depending on model and conditon they run ...
Grampus Split bamboo fishing poles5/24/2008
  Q: I have three Grampus poles in the original cases made by Kiraku and Co Inc. The large one is the ...
  A: ebay is a good place to sell these rods. Unfortunately, the collectors market is really centered ...
Bamboo Flyrods5/22/2008
  Q: Mr. Vermillion; Recently, I purchased two bamboo flyrods at an auction. I am trying to get some ...
  A: Flyrod collectors are very particular about condition, having said that your fly rod should be in ...
Rods5/17/2008
  Q: I have a couple rods I am not sure about I was told there mostly baitcasters. Looking to find out ...
  A: I might be under estimating them - from the standpoint that I am considering collectors value vs ...
milwar fishing rod5/12/2008
  Q: found a nice milwar rod in it's original canvas bag with the base and the 3 extensions quite old i ...
  A: I am not able to determine the maker from this rod - here are some general numbers 1. american ...
edgar sealey rod5/10/2008
  Q: Have uncovered this fly rod given to me years ago by an old friend. It has the signature of Terry ...
  A: Please provide some additional information, the length of the rod fully assembled. It should have ...
Fenwick Surf Rod4/24/2008
  Q: I was recently left a surf rod by my grandfather, it appears to be in perfect condition, I'm ...
  A: Biily, most of the Fenwick freshwater rods run $50 - $100 on ebay etc - occasionally nice flyrods ...
lures4/9/2008
  Q: Hy, Me and my dad are crappie fishermen and love using Lil Dad Crawdads but we just cant seem to ...
  A: I am not familiar with this specific lure, however here are two places to check ebay, under Home> ...
Pflueger Freespeed Model #19144/3/2008
  Q: I have a boxed Pflueger Freespeed 1914 non levelwingd baitcast reel that I cant seem to find any ...
  A: The earlier Free Speed made by Pflueger starting in the late 30s, was non-levelwind, free spool ...
old fishing lures3/31/2008
  Q: I have two old fishing lures that are quite interesting. They were sold by the LEON TACKLE CO.of ...
  A: Your lures are collectable, can you emial a photograph (or scan them). It will help clarify the ...
cleaning fishing rod3/30/2008
  Q: I have a sage tcr fly rod and some of the guides have light corossion. Any products or hints how to ...
  A: I would be careful about letting the navel jelly near the the graphite. If the corrision is light, ...
trying to find value & Info Please3/25/2008
  Q: I have an Eagle Claw rod . with the signatures of Wright & Mc Gill , Trailmaster 7 1/2 ft Another ...
  A: I beleive you have a 3 or 4 piece fiberglass flyrod. Its value will range from $10 to $50 depending ...
Antique Bamboo Rod3/11/2008
  Q: I have an H.W. Hawes & Co. bamboo rod, Makers Abrecombie and Fitch, inscribed on it is # A 633. I am ...
  A: Your rod is probably from the 1920s maybe earlier. In perfect condition, with both tips, no wear it ...
Age of box swivels2/13/2008
  Q: Can you tell me about when fishing lure manufacturers stopped using the old box swivels? For ...
  A: There is actually controversy on this subject. Traditionally box swivels are considered the earlier ...
bamboo fly fishing rod2/6/2008
  Q: I have a bamboo fly fishing rod made in japan with a sticker that says gold fish and a picture of a ...
  A: After WW2 Japanese manufacturers made low cost split bamboo rods. These rods are on the low end of ...
Mohawk (?) Rod9/4/2007
  Q: Robert, I have a rod that has a cork handle with a metal cap on the butt end. To hold the reel it ...
  A: I believe your describing a steel fishing rod with glass agate eyelets in the line guides? Mohawk ...
fly rod value8/21/2007
  Q: I have a rod that belonged to someones grandfather. It has to be 50-75 years old. It came in a ...
  A: I am assuming its Bamboo? Without markings its really tough to provide value - bamboo rods range ...
Shakespeare8/21/2007
  Q: I am an online auction broker. I have a client that says he has a 1924 Shakespeare Rod & Reel. I ...
  A: Shakespeare is one of the big five tackle manufactures that started off before 1900 under William ...
Wright & McGill Fly Rod8/18/2007
  Q: I recently purchased a 3 piece, 9' Wright & McGill fly rod and a flea market and I'm curious about ...
  A: Wright & McGill bamboo fly rods are very collectable - however they should have two tips (one ...
antique rod and reel8/3/2007
  Q: how much do you think a 1902 shakespeare casting rod model 6 and a 1902 thrifty real model fo or fq ...
  A: sorry for the delay, I am on vacation: The thrifty reel is of low collector value, 1902 is a model ...
metal telescopic fly fishing rod7/29/2007
  Q: what i have is a telescopic metal fly rod compact measures 41" extended just over 9'. cork handle ...
  A: These rods typically sell in the $5 to $25 range depending on condition. The rod was probably sold ...
antique fishing rod7/22/2007
  Q: I have what i believe is a Shakespeare Bamboo Surf fishing rod. It was given to me in 1959. The ...
  A: Generally, Bamboo flyrods custom built are most collectable. Other bamboo rods are not highly ...
Wright-McGill fishing rod7/15/2007
  Q: I acquired a Wright-McGill 2 piece spinning rod from a garage sale, it had been re-finished. there ...
  A: Without further details they go in the $20 to $60 price range. At the high end the rod will be in ...
Baitcasting rod7/1/2007
  Q: I have a rod, marked Roland A. Fritz, it is steel and approx 5 ft long. The handles look like blue ...
  A: I appologize for the delay I just returned from a business trip. Here is a website on fishing reels ...
bamboo rod6/21/2007
  Q: I'm trying to find out as much information as I can about an older bamboo rod. It was purchased by ...
  A: I dont have a lot of information to provide, a number of japanese makers went into production after ...
fishing real6/16/2007
  Q: My son found a real in someone's trash (he is a trash man) it is a Great Lakes Product and is an SR ...
  A: Great Lakes reels are considered low to medium grade quality to reel collectors. They run from $2 to ...
Great Lakes Products6/3/2007
  Q: I'm working on a little exhibition of fishing stuff for a small town history museum. I have a "Great ...
  A: YOu can post questions on the reel site and possibly find a collector. I found some references ...
Great Lakes Products5/30/2007
  Q: I'm working on a little exhibition of fishing stuff for a small town history museum. I have a "Great ...
  A: I will ask around on this company. I am guessing 50s-60s era.... Not sure why you rated, while I ...
Bamboo Spinning Rod5/6/2007
  Q: I have a two piece 6' bamboo spinning rod. Appears to be in original unmarked sack. It has 18" cork ...
  A: I will do some checking on the rod. From a collectable, bamboo spinning rods are at the low end. ...
old baitcasters3/25/2007
  Q: Good afternoon Robert, i have some old pfleuger baitcasters that i would like to set up and use. how ...
  A: First, disassemble and clean the reels. Then lube with a 3 in 1 oil. You will need to keep a can ...
age of rod1/23/2007
  Q: when did the mohawks rods come out. Not the fly fishing rods but a regular rod with 3 eyes and real ...
  A: I need more information about the construction. Mohawk was a line of Horrock Ibbotson - who made ...
rods1/16/2007
  Q: when buying old rods are name brands more important than say company brands tim
  A: Fishing rods are broken into several catagories: Most valuable Bamboo flyrods - custom made, high ...

All Questions in This Category

Email this page
     
User Agreement | Privacy Policy | Kids' Privacy Policy | Help
Copyright  © 2006 About, Inc. AllExperts, AllExperts.com, and About.com are registered trademarks of About, Inc. All rights reserved.