Fitness Equipment / Exercise Machine Repair/HealthRider S150


Hi Jeremy
About this treadmill again, you were right, it needs a pulley. Also, it inclines slightly when started, but not for any hill climbing programs. The pulley seems do able, what about the incline mechanism? Thanks again.

Some treadmills are designed to cycle through an incline calibration on power-up. If it is doing this it will incline all the way up, then all the way back down. Other treadmills require that they are placed into a specific calibration mode. If the incline is not cycling all the way through, it is possible that it is out of calibration and you need to put it into calibration mode to force a calibration. The procedures to calibrate the incline vary from model to model and you're best to contact technical support of the manufacturer of the treadmill.

Fitness Equipment / Exercise Machine Repair

All Answers

Answers by Expert:

Ask Experts




As a parts expert at I can answer questions related to replacment parts for your equipment and assist in narrowing down your issue to which part(s) might correct your problem.


13 years of fitness equipment experience from a repair perspective as a field technician and parts expert.

Factory trained technician by several major manufacturers.

Awards and Honors was recognized as a 2010 Inc500 company, one of the fastest growing companies in the country.

©2017 All rights reserved.

[an error occurred while processing this directive]