Follow-Ups to Answer from Expert Erik H.

---

Timmy wrote at 2008-06-23 18:51:39
For the '99's, the Owner's manual says -

1) Turn key from OFF to ON eight times within 10 seconds ending

in the ON position.

2) After doors lock then unlock, press any button on the

remote being programmed.

3) The doors should lock/unlock to confirm programming.

4) Turn key to OFF and door locks should cycle one last time.



You can program up to four remotes this way, but they must

all be done at the same time (repeat step 2 for each).

----

I just done this on my 2001 Expedition it work great.

---

sideoiler wrote at 2009-01-24 19:27:19
This isn't an answer but more of a GREAT thank you to Erik for saving me money and time when he included the Thunderbird in his instructions. I've tried about everywhere to get this information,to no avail. Thanks again!!!

---