AboutDoug Little Expertise I can answer questions relating to Legal Concealed Carry in most of the Western US, with detailed knowledge of Concealed Carry laws in Arizona.
I have an in-depth understanding of tactical and defensive handgun skills including Close Range Gunfighting, Armed Vehicle Operations, Low Light Gunfighting and Advanced Concealed Carry techniques.
I can answer detailed questions regarding Firearms Safety, Gun Handling and Marksmanship techniques. I can also answer detailed questions in the area of Crime Prevention and Victim Avoidance.
***PLEASE NOTE: Despite having done so in the past, I cannot continue to answer questions about valuation of firearms of any kind or questions regarding when a gun was made or what the impact of age or condition might be on the value of any firearm, either contemporary or antique.***
Experience NRA Training Counselor, NRA instructor for Personal Protection in the Home, Home Firearms Safety, Basic Pistol and Refuse to be a Victim disciplines. Certified by the AZ Dept. of Public Safety as a Firearms Safety Instructor for AZ Concealed Weapons Permit Classes and AZ Unarmed and Armed Security Guard Training. Instructor in both Low Light Gunfighting and Close Range Gunfighting. Staff instructor for Suarez International. I am a multiple graduate of Gunsite Academy and hold a certificate of Armed Vehicle Operations from them. I have been instructing in Arizona professionally for the past 5 years and have over 20 years shooting experience. Certified by the International Society of Crime Prevention Practioners as a Crime Prevention Specialist.
Organizations National Rifle Association, Life Member; International Society of Crime Prevention Practioners; International Defensive Pistol Association; Arizona State Rifle and Pistol Association; Association of Police Marksman; President, US Marshals Posse - District of Arizona
Education/Credentials BS, Political Science, Appalachian State University;
Suarez International - Low Light Instructor,
Suarez International - Close Range Gunfighting Instructor,
Gunsite Academy - Armed Vehicle Operations,
Arizona Department of Public Safety - Firearms Safety Instructor,
NRA Instructor Ratings in Personal Protection in Home, Home Firearms Safety and Basic Pistol,
ASP Tactical Baton Instructor,
ASP Tactical Handcuff Instructor.
Past/Present Clients Please visit my website for testimonials at http://www.armedpersonaldefense.com
I have recently registered my fathers riffle as was handed down to me. This was his fathers prior. My dad has passed away so i wasn't able to find out all of the history behind it.
It is a Stevens .22 bottom cartridge type. I am not interested in the $$$ value so much as the history. I do not wish to part with it. I have a copy of the first registration when the Australian firearm act was introduced, i think 1943 from memory. The serial number in the stock and also under the barrel is P4.
Do you know roughly when these were made?
There is also some surface rust on the barrel, i dont want to disturb the original bluing but want to keep it to a minimum, how should i treat it from now on? I always clean after use and apply a light oil all over.
The spring for the load mech seems quite worn and lost its tension, are the replaceable?
And am i doing any harm by using it from time to time for a recreational shoot? I would like to pass on to my kids one day.
Again, thankyou for any help with the above. I know that is a lot of questions.
Regards
Ryan
Answer Ryan,
I'd like to help you out. Can you possibly take a look at the rifle and see if there is a model reference. It would most likely be something like a
No. 12 Markman or a Favorite or possibly have a Model number only. If you could also describe the action, it would be helpful. Stevens made quite a few different rifles.
Stevens was originally founded in 1864 in Chicopee, Massachusetts. In 1886 the name was changed to J. Stevens Arms and Tool. In roughly 1920, Savage Arms bought the company and began marketing several guns under the J. Stevens Arms Co. brand. In 1940, the "J. Stevens Arms" was simply shorten to "Stevens". By knowing exactly how your gun reads, we can use that information to narrow the date a bit.
More specific info is available once I know the model number and exactly how the manufacturer name is indicated on your gun.
In terms of rust removal without damaging the finish, it is really quite easy if you are careful and take your time. You'll need a light oil, perhaps like you use to lubricate the gun, some fine steel wool and a little elbow grease. Make sure the gun is unloaded and place it on a work surface covered by a towel or pad to protect the gun from being scratched up. Apply some oil liberally to the rust then gently rub with the steel wool. Use a clean cloth to wipe off the rusty oil and then repeat. You can continue until the rust is gone or until you start to see damage to the finish. After you are done, coat the area with a light film of oil to prevent the rust from returning.
Whether you will be able to find a spring for the loading mechanism will depend on the model. Generally parts for these older rifles can be pretty rare. If it is fully functional, it would be possible to shoot, but I probably would not shoot it much. The pressures on modern cartridges are higher than those made 50+ years back. It may cause excess wear on the gun.
