| Subject | Date Asked |
|
| Berretta92f | 11/13/2009 |
Q: Sir One of my soldiers has a 92F that the slide is extremly hard to work when the hammer is dropped. ...
A: What happens when you fire the gun? Does it cycle OK? It would be impossible to tell without ...
|
| Barrel swap in Smith & Wesson M&P40 | 11/12/2009 |
Q: I'm getting a Smith & Wesson M&P40 and I want to get 357 SIG and 9mm barrels so I can have 3 in 1, ...
A: While the M&Ps probably are the identical guns, made specific to calibers, I think it is always a ...
|
| home and hand gun safety | 11/2/2009 |
Q: I would like to know about penetration depth of various caliber bullets (regular over the counter ...
A: I'm afraid I don't know of any schools right in you area. However, I did a quick google search for ...
|
| home and hand gun safety | 11/2/2009 |
Q: I would like to know about penetration depth of various caliber bullets (regular over the counter ...
A: Linda, ACP stands for "Automatic Colt Pistol," and denotes cartridges that were first developed for ...
|
| home and hand gun safety | 10/30/2009 |
Q: I would like to know about penetration depth of various caliber bullets (regular over the counter ...
A: Your question is an interesting one with a lot of variables. The question really is, how much ...
|
| 32 auto | 10/25/2009 |
Q: i was wondering if you could give me your opinion about my czechoslovakia vzor 70cal. 7.65 32 semi ...
A: The value of these guns is found in their cost, and that's about it. It is overly large and heavy ...
|
| responsable for missing gun? | 10/25/2009 |
Q: During my recent divorce, a 9mm handgun has come up "missing", I purchased it from a gun shop, and ...
A: If someone commits a crime with the gun, you cannot ordinarily be held responsible for the crime ...
|
| Winchester Rifle | 10/15/2009 |
Q: I just purchased a Winchester Model 70 7MM Rem. Mag. Serial # G162859 Composite Stock with a W.A. ...
A: First, with regard to your particular rifle, just as the link you clicked on said in bold letters, I ...
|
| comparing glock 40 cal. handgun to m-16 | 10/13/2009 |
Q: Sir, I am a student at a college in Massachusetts. I know almost nothing about firearms. I am ...
A: Brian, I applaud you for the topic of your paper. Though perhaps beyond the scope of your ...
|
| Crack Shot 26 | 10/12/2009 |
Q: My Father-in-Law showed my an old .22. It is a J Stevens Arms & Tool CO. Chicopee Fall, Mass. ...
A: Old guns are not really my thing, and as the link you clicked on said, I can't tell you the value of ...
|
| Low serial number S & W Model 28 | 10/5/2009 |
Q: I am a retired Police Detective with 37.5 years of service. I have a Smith and Wesson Model 28 with ...
A: Very nice piece. Gun Broker will give you the widest exposure. If you'd rather not use that service, ...
|
| Concealed carry gun | 9/27/2009 |
Q: The dilemma of carrying a small and light enough gun to conceal versus its stopping power continues ...
A: Guns chambered in the .32 H&R Magnum, and especially the .327 Magnum developed off of it, would be a ...
|
| BROWNING FUSION EVOLVE SHOTGUN | 9/26/2009 |
Q: I am interested in purchasing a semi automatic 12 gauge 3 inch chamber Browning Fusion Evolve (gas ...
A: Sporting shotguns are a little out of my area, but I haven't heard anything negative about these ...
|
| My husband is a felon | 9/25/2009 |
Q: My husband is a felon and I'm wanting to purchase a firearm for my own use... Can I do this without ...
A: Audrey, I think you should consult an attorney about this. Technically, the answer is yes, you ...
|
| transporting a gun | 9/17/2009 |
Q: My husband inherited his brothers gun. The gun is in IL. We live in AZ. Our son is moving to AZ ...
A: There's no way one person can keep up on the patchwork of gun laws from state to state. The Federal ...
|
| the Taurus Judge | 9/7/2009 |
Q: I am a big fan of the .45 long colt and have always entertained the idea of firing a shotshell ...
A: On thanksgiving mornings before family comes, I frequently get together with a bunch of retired ...
|
| 410 pistol | 9/5/2009 |
Q: i nwould like to buy a 410 or 28ga pistol to kill snakes when i hunt certain areas not one that ...
A: The closest thing to what you're looking for is a revolver made by Taurus called The Judge. It will ...
|
| firing pin | 8/24/2009 |
Q: what are the benefits of floating firing pin?
A: There are no real benefits, except that it is easier and cheaper (by pennies, which may be an issue ...
|
| ar 15 | 8/16/2009 |
Q: i was just wondering how well an ar 15 would work as a deer rifle. i've heard both sides and always ...
A: The AR-15 can be chambered in a number of different cartridges. If it was chambered in something ...
|
| da/sa pistols | 8/12/2009 |
Q: I understand the term sa "single action" pistol, ie. the hammer is cocked when the slide is ...
A: You assumption is incorrect. If you chamber a round on a DA pistol (either by reciprocating the ...
|
| da/sa pistols | 8/12/2009 |
Q: I understand the term sa "single action" pistol, ie. the hammer is cocked when the slide is ...
A: Guns are pretty simple tools. Probably the best way for you to understand them is to get hold a ...
|
| browning 22 cal rifle or pistol | 8/3/2009 |
Q: sir, i have an old receipt dated in 1979 and i don't know if the receipt is for a pistol or rifle. i ...
A: Older guns are not my area, but perhaps I can point you in the right direction. The stock # will the ...
|
| 1911 Ithaca | 8/1/2009 |
Q: I have a 1911A1 Ithaca US Army handgun - Serial number 2001502. I would like to find some one to ...
A: Any reputable gunshop should be able to do it for you. The standard in the industry to judge gun ...
|
| riot equipment | 8/1/2009 |
Q: What's the kind of weapon used by Police officers to suppress riots, also describe the kind of ...
A: This is a bit out of my area, which is specifically firearms. Different cultures and individuals ...
|
| Revolver handgun for trapping use | 7/28/2009 |
Q: I would like to buy my son a revolver for trapping. He is 24 yrs old and has rifles, but would like ...
A: $200 would be an extraordinarily good deal, but depending on where you live you may be able to find ...
|
| gun info | 6/27/2009 |
Q: do u Know anything about j c higgins model 103.18 sears. roebuck & company-S-L-LR .22 cal
A: Not a lot. JC Higgins was the Sears brand that they contracted out to various manufacturers. ...
|
| old hand gun | 6/26/2009 |
Q: i have a 32 cal semi and all i would like to know if you can tell me the maker.all i can tell you is ...
A: Well, just as the link you click on said, I can't tell you the history or value of your guns, but in ...
|
| light weight hand guns | 5/30/2009 |
Q: I would like a recommendation on a light, safe hand gun for a lady. I like the Charter Arms pink ...
A: Current production revolvers leave a great deal to be desired. Charter Arms has been and continues ...
|
| firearm info | 5/26/2009 |
Q: I have a FIE Arminus revolver, model 3575G, 357 Mag caliber, 5 1/2 " barrel length and Gold ...
A: As the link you clicked on said, I can't tell you the value of your guns. Regarding how to sell it, ...
|
| stolen guns | 5/20/2009 |
Q: i want to buy an ar-15 from a guy i know , can i run the serial no's. on line
A: No, not to my knowledge. The best you could hope to do would be to contact your local reputable gun ...
|
| .410 and .45 ammo | 5/18/2009 |
Q: I have seen a handgun called "the judge" which can fire either .410 shotgun ammo or .45 cal bullets. ...
A: It's not really that complicated once you study the history of various cartridges. Cartridges that ...
|
| .410 and .45 ammo | 5/17/2009 |
Q: I have seen a handgun called "the judge" which can fire either .410 shotgun ammo or .45 cal bullets. ...
A: Although theoretically possible, I would never do it. The pressure of some .45 Colt loads (that's ...
|
| Most accurate Remington 700? | 5/10/2009 |
Q: I have read and re-read your 2003 reply about the most accurate rifle. You covered not only the ...
A: Besides the one you've mentioned (currently in production) there are a host of other Remington 700s ...
|
| 40 S&W beretta model 96 | 5/9/2009 |
Q: I recently own this gun and it has now started to jam up,. What can I do, or what would cause this ...
A: While the Berettas have some features that make them less-than-ideal fighting handguns, unreliable ...
|
| 5.56mm (M855) vs 9mm JHP | 5/8/2009 |
Q: Probably a stupid question, but I have an argument with a fellow Airman about this. Which would do ...
A: Well, Jay, if you had anything riding on this bet, you just won. 5.56 probably won't generate that ...
|
| Standard issue handgun for CA city police | 5/8/2009 |
Q: It is my understanding that CA city police are issued S&W 9mm or 40 cal.Have you heard of ANY ...
A: I doubt there are any large agencies issuing the HK, otherwise HK would point out that fact in its ...
|
| H & R shotgun side mounted shell holder | 4/27/2009 |
Q: I have a H&R Model NP1P18 12ga shotgun that I would like to mount a side reciever shell holder. Will ...
A: No, SideSaddles such as those made by TacStar attach to the gun using the retaining pins that hold ...
|
| Do I Need to register | 4/21/2009 |
Q: I bought a couple guns at a show and I've been told that I need to register them if I will be ...
A: You don't mention what state you live in. There is no federal law that requires registration, and ...
|
| Scopes | 4/20/2009 |
Q: In a recent question I read where you would reccomend a bolt action .308 for shooting in the ...
A: 1. There are so many good scopes out there today, I couldn't give you a brand or model. For shooting ...
|
| S & W .38 Special revolver | 4/15/2009 |
Q: I just received a S&W .38 special from my mother that has been sitting in a holster in her drawer ...
A: I am assuming that you are pushing the cylinder release as you try to open it. Accumulated dust ...
|
| Handgun | 4/10/2009 |
Q: I have a friend who is selling a handgun, I just turned 21 so how do I switch the gun from his name ...
A: That depends a great deal on the state you live in. In most states, there's no "switching of names" ...
|
| Cartridge Calibers List review | 4/9/2009 |
Q: I am developing a web site about firearms and I have list of around 150-200 cartridge calibers. With ...
A: I wouldn't undertake the project at any price. There are so many variations on calibers out there, ...
|
| converting 9x19mm brass to .380 ACP | 4/8/2009 |
Q: I'm really cheap and have lots of time to play at the reloading bench, so ... Can I convert 9 mm ...
A: Jim, THEORETICALLY that should be possible. The 9mm is a higher pressure cartridge and the webbing ...
|
| Shelf life of Bullets | 3/26/2009 |
Q: I have a 38 special revolver and have bullets for it that have been around for a couple of years or ...
A: Tony, since revolver cartridges are not fed into the gun (just dropped into the chambers), there is ...
|
| first gun purchase/ salesman directed me to Jimenez | 3/2/2009 |
Q: I have never purchased a firearm before and the salesman directed me to the Jimenez JA 380. I did ...
A: Patricia, I would only wish a JA on my enemies - it is not a gun you should trust your life to. ...
|
| Kahr PM9 Trouble | 3/1/2009 |
Q: I may have a real problem. My son removed the slide stop from my PM9 and something's wrong. The ...
A: Without seeing the gun, it is impossible for me to diagnose the problem with any certainty. First, ...
|
| How to care for store rifle | 2/17/2009 |
Q: I have a 38-55 Winchester Carbine in great condition and want to keep it that way. How best to ...
A: Caring for firearms, particularly in modern climate controlled houses, is not too hard, but it does ...
|
| shooting | 2/12/2009 |
Q: what does bullet weight have to do with shooting accurately? and what is spin drift pertaining to ...
A: The things you're asking about could fill a book. Certain caliber handguns or long guns will show a ...
|
| rem model 700 adl to bdl | 2/10/2009 |
Q: I have a 700 adl and want to by an aftermarket stock for. The stock I want says i'm supposed to do a ...
A: The model 700 bolt and receiver are the same, as is the barrel (depending on what barrel it is ...
|
| Defensive Caliber | 2/4/2009 |
Q: I'm from N.Y.C. and trying to decide on which caliber to to go with for home defense. I recently ...
A: Gerald, Before 1999 the NYPD was the only law enforcement agency in the country still to use FMJ ...
|
| sniper rifles | 1/24/2009 |
Q: What type of scopes do military snipers use at long range shooting(1000 yd+), and who sales them?
A: Not long ago all sniper rifles wore some configuration of Leupold scope in the 8, 10, or 12 power ...
|
| us revolver 32 ca. | 1/20/2009 |
Q: I I have a 32cal revolver with a split on a the cylinder. do you know a place I can get another ...
A: Since you don't mention make or model, I should let you know that gun parts are not interchangeable. ...
|
| Walther PPK | 1/17/2009 |
Q: Would you be able to tell me what the symbols are called on my PPK (with a six digit serial number ...
A: Aside from serial numbers, firearms (especially those used for military or police service) may have ...
|
| Measuring Bore Size | 1/11/2009 |
Q: This question has probably been answered before, but I have been unable to construct an accurate ...
A: I'm not sure if wax would be dimensionally stable enough. I can't say it IS not, just that I'm not ...
|
| gun laws-target shooting | 1/9/2009 |
Q: i live in ca and i have a neighbor that target shoots on his property that is five ac we also have ...
A: Fawn, You'll have to rely on the police or your reading of the California code to tell you the law. ...
|
| shell size for 410 shotgun | 1/8/2009 |
Q: I have inherited an old 410 double-barrel shotgun. I do not know which size of shell to use: 2 1/2 ...
A: Jim, The difference in those chamberings is in the size of the forcing come. A gun chambered in 2 ...
|
| Which goes farther? | 1/4/2009 |
Q: Which goes farther? Charles Daly 12 gauge shotgun, a D.P.M.S. Pather Arms 5.56 cal AR-15 or a .40 ...
A: The guns they are launched from are irrelevant. The 5.56 will go the furthest, the .40 the next ...
|
| First handgun | 1/3/2009 |
Q: I'm looking to purchase my first handgun. I live in Missouri where we have conceal and carry. I'm ...
A: Your short question would require a book to answer adequately (meaning their great questions), but ...
|
| triggers | 12/23/2008 |
Q: i have looked all over the net what trigger will work and were would you look ps cheaper is better ...
A: The old Interarms rifles were made in England I believe. But there was also an import company in VA ...
|
| transfer gun | 12/22/2008 |
Q: I live inside the city limits of Mansfield, Ohio. My dad bought my 16 year old son a 22 Rifle and a ...
A: I'm not Sid, but I'll do my best to try to answer your question. I will say that, not living in or ...
|
| flying with firearm | 12/20/2008 |
Q: I will be flying US Air and want to take a firearm, it will be in the checked baggage. the best I ...
A: No, or at least, you may have to have your attorney argue it to a jury. There are such a myriad of ...
|
| Handgun for personal protection | 12/11/2008 |
Q: I am looking to purchase a handgun for personal and home protection. I am leaning strongly towards a ...
A: The Glock 19 is hands-down the gun I would have if I could only have one handgun to carry. It is ...
|
| Opinion on Kel Tec | 12/10/2008 |
Q: I am thinking of buying a Kel Tec sub 2000 (9 mm carbine that folds)...what is your opinion of this ...
A: I've shot both and briefly owned the Kel Tec. Down side of both guns is that they hard to clear of ...
|
| Selling a gun | 12/10/2008 |
Q: How do I sell a Sig 40 cal that I don't need? Can I just sell to someone on the internet or are ...
A: The laws regarding resale vary from state to state. In the more Draconian ones, every sale has to be ...
|
| single shot 410 | 12/9/2008 |
Q: I have a Crescent Certified 410 shotgun that was given to me by my grandfather. The spring that ...
A: That spring is not critical in terms of its weight, so if you can get a spring that is close you can ...
|
| ruger p90 | 12/8/2008 |
Q: what kind of ammo should i use in a Ruger p90 i would like know what brand,grain full jacket and ...
A: You can use any standard .45 ACP ammunition in the gun. Beyond that, what you use will be dictated ...
|
| 9mm | 12/1/2008 |
Q: i recently shot a glock 19 but i felt that the trigger pull was little to hard for me. is there a ...
A: First of all, you want to check and make sure that there was a standard trigger in the Glock you ...
|
| WALTHER P990 | 11/27/2008 |
Q: I BOUGHT A WALTHER P990 9MM THAT CAME WITH A 10 ROUND MAGAZINE, WILL A 15 ROUND FIT? THANKS.
A: The gun was designed for full capacity magazines. The ten round magazines were developed in response ...
|
| shotgun | 11/19/2008 |
Q: have an old shotgun that i traded another gun for.someone filed srial number.want to keep for home ...
A: You can call the ATF directly if you want to, but there is a good chance they will come and relieve ...
|
| gun registration transfer | 11/17/2008 |
Q: I have gun from a deceased friend. i also have his registration for the gun but i don't have a death ...
A: I'm not sure where you're writing from. In most of the united states, gun are "transferred" in a ...
|
| US Revolver | 11/16/2008 |
Q: I have my granddad's old US Revolver Company, revolver. I know it was most likely msde by Iver ...
A: I have never in my life seen a gun that did not have the caliber stamped on the barrel, although ...
|
| ammo for 3 inch barrels in .45 | 11/12/2008 |
Q: I have seen on some show within the last 6 weeks that they have developed ammunition for automatics ...
A: Speer Gold Dot has recently been released in their SB (short barrel) configuration. The terminal ...
|
| taurus 410 pistol | 11/12/2008 |
Q: Sir I want to purchase the 44/410 (the judge) and I would like to know the prefered barrel size (3 ...
A: I don't really have much to say about this gun one way or the other. The benefit of the longer ...
|
| Reloading 44 Rem Mag | 11/11/2008 |
Q: Sir, I recently picked up the reloading hobby and ran into a little problem.I am using a Colt ...
A: There are loading manuals that are caliber specific that use all the loading data from various mfg ...
|
| how to make a shooting backstop | 11/9/2008 |
Q: I just bought a smith & wesson sigma 40 cal., but i live so far from any range. is there any way i ...
A: Provided there are no restrictions from shooting there, you have more than enough room for a pistol ...
|
| Sig P230 decocking lever | 11/9/2008 |
Q: a friend gifted me with a SIG P230, its decocking lever not functioning. In its present condition, ...
A: In all likelihood, the spring on the decocking lever is broken. Many of the parts on the SIG are ...
|
| winchester 94,scope mount | 11/6/2008 |
Q: i have a 94",top ejection,i need a scope base to mount a scope foward of the ejection port. my eye ...
A: Among commercially available bases, my choice is always those from Leupold. Cabelas has them for ...
|
| Handgun | 11/5/2008 |
Q: I was wanting a handgun to carry but i don't know what type would be good to carry i want a common ...
A: Your idea of wanting a common caliber is wise. With the cost of ammunition right now, proprietary ...
|
| converted replica guns | 11/3/2008 |
Q: Hello again, its Kate here, the reporter from the UK. I emailed you last week with some questions I ...
A: Of course, Kate, anything can be used as a weapon. How serious an injury it will cause is another ...
|
| converted replica guns | 10/29/2008 |
Q: Firstly let me thank you in advance for taking the time to answer my question. I live in Europe ...
A: No, that particular story has not hit the shores of the U.S. The big story from over there is how ...
|
| converted replica guns | 10/29/2008 |
Q: Firstly let me thank you in advance for taking the time to answer my question. I live in Europe ...
A: Kate, Guns designed to fire only blanks may be substantially weaker than actual firearms as regards ...
|
| conversions | 10/28/2008 |
Q: What are NY1, NY2 and Miami pistol conversions? Do they have anything to do with either the spring ...
A: These trigger configurations are specific to the Glock pistol. When the Glock pistol was accepted ...
|
| .380 | 10/27/2008 |
Q: i recently took the hobby of target practice. i shoot a .22lr with no problem then i shot the 9mm. ...
A: The .380 ACP cartridge is known in Europe as the 9mm Kurz ("short"). Whereas the 9mm Parabellum (or ...
|
| .380 | 10/27/2008 |
Q: i recently took the hobby of target practice. i shoot a .22lr with no problem then i shot the 9mm. ...
A: It depends on what you want the gun for. If it is only for punching paper, I'd stick with the .22. ...
|
| Modification of firearms | 10/25/2008 |
Q: I reside in New Mexico U.S.A.. I recently purchased a 12 gauge single shot at a flea market. It has ...
A: According to the National Firearms Act of 1934, your gun is legal without a tax stamp. To fall under ...
|
| gun laws | 10/25/2008 |
Q: i was just wondering if i dont have a ccw can i still carry my gun in a holster on my hip if 100% ...
A: According to OpenCarry.Org AZ, yes (http://opencarry.org/az.html) If I were you I would verify this ...
|
| mossberg 500 serial numbers | 10/21/2008 |
Q: I'm trying to determine the model year of my mossberg 500. Is it the last two numbers,on mine it's ...
A: Very rarely does a firearm's serial number contain the year of manufacture. I've only ever heard of ...
|
| need help | 10/20/2008 |
Q: i just got my first gun from a pawn shop and it didn't have a disassemble manuale with it i was ...
A: No two makes of firearms are exactly the same, so I can only help you so much without knowing a make ...
|
| Remington 870 Magnum | 10/19/2008 |
Q: Can I install a slug barrel that indicates it fits 870 Wingmaster, 870 Special Purpose, and 870 ...
A: I can't tell you for certain without physically examining it, but the answer should be "Yes." It ...
|
| need help with handgun selection | 10/18/2008 |
Q: Am looking to find if a 9mm model similar to the Walther PPK blowback type exists, can only find ...
A: You won't find any auto pistol chambered in 9mm in a simply blow-back action. Without a locked ...
|
| 38 Sp | 10/13/2008 |
Q: I hope you can help me with this.My friend is selling a 38 I would like to buy.It is a Rossi 38 made ...
A: Paul, The Taurus and Rossi guns were pretty similar "back in the day," the Rossi being a little ...
|
| Info on a 45 | 10/13/2008 |
Q: I have a .45 caliber handgun. All it says on it is "Golden State Arms Corp. Pasa, Ca. Santa Fe Cal ...
A: Golden State Arms was in importer of cheap, usually "knock-off" military surplus firearms. I think ...
|
| jennings 380 | 10/12/2008 |
Q: a friend has a jennings model 28 i think he told me but not sure he is always doing things for me i ...
A: Butch, unfortunately, because the Jennings is a low-priced, low quality firearm you will have a very ...
|
| Bullet speed | 10/12/2008 |
Q: What is the speed of sound. What is magnum bullet speed generally and in particular for 7mm magnum. ...
A: The speed of sound varies with the medium (atmosphere) but is generally represented as 767 mph or ...
|
| Quarterly Qualifications | 10/11/2008 |
Q: Every three month we have qualification with are weapons. During practice I shoot great. As soon ...
A: Denise, I need more information. Can you tell me: 1) What exactly your qualification course ...
|
| 5" Python Revolver | 10/10/2008 |
Q: My husband carried this gun as a trooper in the State of Florida, Serial #K-74105. It was sold on ...
A: There is probably no way to locate it. The Distributor could have sold it to any FFL in the country. ...
|
| Machine Guns | 9/29/2008 |
Q: GCH, My question contains pictures. May I ask you for your email address so that I can send them to ...
A: Wow, that's certainly an interesting proposition. Bundle your produce with cigars and firecrackers ...
|
| your advice please... | 9/27/2008 |
Q: I believe I have contacted you before. I am looking to purchase a new Glock handgun and need your ...
A: I don't know the reputations of any of the schools listed near Tuscaloosa, so my recommendations ...
|
| your advice please... | 9/27/2008 |
Q: I believe I have contacted you before. I am looking to purchase a new Glock handgun and need your ...
A: Lee, Care for the Glock is simple. Your cleaning kit should consist of: 1) A cleaning rod 2) A ...
|
| your advice please... | 9/27/2008 |
Q: I believe I have contacted you before. I am looking to purchase a new Glock handgun and need your ...
A: As you no doubt know, these guns are all essentially the same in different calibers. All the ...
|
| Kahr PM9 Battery Time | 9/16/2008 |
Q: I am a new owner of a Kahr PM9, but I think this question is pertinent to all DA semi's. How long ...
A: Truly, Bob, on modern handguns, particular of the striker-fired variety, the spring will never ...
|
| Police Positive 38 Special | 9/14/2008 |
Q: I have this hand gun ,It was my Father-in-law after his death in 1985.I would like to known how old ...
A: Ken, The link you clicked on said, "I CANNOT TELL YOU THE HISTORY OF YOUR GUNS." However, I like ...
|
| light weight concealed carry handgun | 9/6/2008 |
Q: What do you recommend for a very light weight personal protection handgun. Is there a really light ...
A: Kathy, "Really light weight" is hard to quantify. I have carried various different handguns from ...
|
| gun site | 9/4/2008 |
Q: My wife and I live on a small farm in eastern Tennessee. I own a H&R model 649 22 lr pistol. The ...
A: I can't tell for sure without seeing the gun, so I will tell you some general principles and you can ...
|
| advice? | 9/3/2008 |
Q: I am 25 year old man in need of some advice. I just moved to a city: Tuscaloosa, Alabama (from a ...
A: Well, I can't take credit for that saying. Col. Jeff Cooper, who passed away not long ago, coined ...
|
| advice? | 9/2/2008 |
Q: I am 25 year old man in need of some advice. I just moved to a city: Tuscaloosa, Alabama (from a ...
A: Lee, I'll start with the caveat that you should get training if you plan on keeping a gun for ...
|
| rem 700 | 8/31/2008 |
Q: i just got an older rem 700 .308 and wandering what i could do to it a make a real tack driver out ...
A: It depends on how much money you want to spend. In order of cheapest to most expensive, I would: 1) ...
|
| S&W 642 Mainspring Tension | 8/28/2008 |
Q: I live in Washington State. My wife recently purchased a S&W 642 Airweight .38 +P; this is the one ...
A: It is possible, but I would with qualifications not recommend it if this is a self-defense gun. ...
|
| holster selection advice. | 8/21/2008 |
Q: I am purchasing a Taurus Model 94 .22 9 shot revolver with a 4" barrel. I am having a heck of time ...
A: Get in touch with the folks at FIST holsters (www.FIST-inc.com). Good leather for a good price, good ...
|
| SigSauer P225 | 8/14/2008 |
Q: First, thank you for your informative answers to my previous questions. I hope that my questions ...
A: I'm not near a resource now where I can check the SAAMI spec, but I believe that the spec for 9mm ...
|
| Standard Issue Firearms | 8/12/2008 |
Q: What is the standard issue handgun for the FBI/ CIA? Once in the field are agents allowed to choose ...
A: No, not really that knowledgeable. I have trained with some federal agents, and know several people ...
|
| Standard Issue Firearms | 8/12/2008 |
Q: What is the standard issue handgun for the FBI/ CIA? Once in the field are agents allowed to choose ...
A: It has been a while since I've trained with anyone from either one of those agencies. The last fed I ...
|
| SigSauer P225 | 8/9/2008 |
Q: First, thank you for your informative answers to my previous questions. I hope that my questions ...
A: The story on the 225s sounds plausible. My local shop often has overseas police trade-ins of SIGs ...
|
| 100 grain .357 sig | 8/7/2008 |
Q: Is it true that the lower the wieght the better. I wonder this because the ballistics for the 100 ...
A: Dave, It's true that the lighter the weight the higher the foot lbs generated. For example, a ...
|
| which is a more powerful cartrsidge | 8/5/2008 |
Q: which cartridge is more powerful, a .40, a .45super, or a .357 sig. Also which one has the greatest ...
A: If the question is asked in the abstract, the .45 Super is the winner. It will typically drive a 230 ...
|
| Gun Store Question | 8/4/2008 |
Q: I am interested in possibly starting a gun store in the St. louis area, and I am wondering if the ...
A: Andy, Not sure what the market is like in MO. I have two acquaintances who have owned shops, one ...
|
| CZ 75 Compact | 8/1/2008 |
Q: Just received CZ 75 Compact, No owners manual, would like to know how to field strip.
A: Very odd that it did not have a manual. You should contact CZ. I'm sure they'll send you one. 1) ...
|
| Which is better | 7/29/2008 |
Q: My cousin and I have been wondering what gun is better. He says that the Ak-47 is the best but I say ...
A: Like with anything else, the question is, "The best for what?" The merits of the AK are that ...
|
| .32 S&W | 7/9/2008 |
Q: Does .32 S&W ammo fit in a 9mm lugar pistol. Will it fire properly? Does it have to go in ...
A: Registered experts can choose to participate in the rating system or not. Those of us who have done ...
|
| 5.56x45mm in Ruger Mini-14 | 7/6/2008 |
Q: and the cautions regarding handloading and 5.56x45mm ammunition. I hope this follow-up doesn't ...
A: This follow up showed up in my in box again. If you didn't get the answer, I apologize. I apologize ...
|
| Remanufactured Ammunition | 7/5/2008 |
Q: Location: Idaho. I hope this question is generic enough. I recently bought a Ruger Mini-14, my ...
A: Lawyers make them put this language in. Ammunition from Black Hills is excellent and perfectly safe ...
|
| 12ga barrels | 6/26/2008 |
Q: Would a 12ga 28" smoothbore shotgun barrel fire a slug as straight as a 24" rifled barrel? which one ...
A: The purpose of rifling, as you know, is to impart spin with increases range and stability. A rifled ...
|
| rifle | 6/25/2008 |
Q: I am looking for a 7000 model Golden Eagle Nikko production w.7mag long action rifle can you help me ...
A: You have to buy firearms in the state in which you reside, or in some cases a state approved by your ...
|
| rolling block | 6/24/2008 |
Q: I got this floor lamp at a Quaker Church rummage sale for $5.00 and a lamp socket screwed into the ...
A: Although you've clicked on a link that says "PLEASE READ BEFORE SENDING. I CANNOT ANSWER QUESTIONS ...
|
| beretta 950BS | 6/24/2008 |
Q: A friend gave me this little handgun earlier today. I removed the clip and drew back the slide and ...
A: I used to have one years ago - they are a pain in the neck. When I first looked at in the gun store, ...
|
| remington model 11 barrel | 6/21/2008 |
Q: I am looking for a barrel for remington model 11. Someone has put a polychoke on mine. Any help ...
A: The 11 was a FANTASTIC gun. I'd be surprised if your local gun store couldn't help you. Other than ...
|
| Dan Wesson 1911/45 Bobtail | 6/13/2008 |
Q: What can you tell me about this pistol? I have heard that Ed Brown makes this for CZ using all ED ...
A: CZ (USA) is now the distributor for Dan Wesson, the later company being an on-again/off-again ...
|
| Stevens model 22-410 over under | 6/12/2008 |
Q: Where can I obtain operating and cleaning information about this model gun. I have inherited it ...
A: I am afraid that the budget-line sporting shotguns are not my thing, but I believe that the Stevens ...
|
| 9 mm luger | 6/9/2008 |
Q: Can a 9mm luger bullet be fired by a rifle? If so, would you please provide me with a source to cite ...
A: No, not by a true rifle, but by a pistol caliber carbine, requiring a dedicated barrel and magazine. ...
|
| JC HIGGINS MODEL 88 22 CAL | 6/7/2008 |
Q: WILL THIS MODEL HANDLE 22 LONG RIFLE?
A: That revolver was manufactured for Sears, usually by High Standard, between the 1960's and the ...
|
| gun cleaning | 6/7/2008 |
Q: Can I use motor oil has lubrication for my HK .45???? Thanxs MC
A: You can, but I wouldn't recommend it. I'd recommend a finer oil to get into the pores of the metal ...
|
| walther pps spring | 6/5/2008 |
Q: I have a walther PPS, that was burnt up in a house fire, everything is still good but the springs, I ...
A: I would make it non-functional (easiest way to do that is to grind down the firing pin so it does ...
|
| walther pps spring | 6/4/2008 |
Q: I have a walther PPS, that was burnt up in a house fire, everything is still good but the springs, I ...
A: One of the reasons why guns are not as large as old match locks used to be is because as metallurgy ...
|
| accurate rifles | 6/3/2008 |
Q: Having read your answer to a previous question of the same nature, I have narrowed down my ...
A: Trey, FYI, the new Cabela's catalog is out, and they are listing a Savage Model 110 available in ...
|
| Noble Mfg. Co. Inc. | 6/2/2008 |
Q: What can you tell me about Model 602J? (My dad left it to me.)
A: They were very poorly made guns. I would not try to shoot it, but are good "models" to learn how a ...
|
| Small, light-weight handguns | 5/6/2008 |
Q: Greetings. I am writing a short-story concerning a young man in a desperate situation. I need a ...
A: If you'd like it to be an auto pistol, a Kahr PM9. This is a polymer framed 9mm pistol that is thin, ...
|
| JA 380 | 5/5/2008 |
Q: I was just wondering how much usually the JA 380's cost.?
A: I'd never encourage you to get one at any cost, and if one were given to me without any cost I'd ...
|
| unusual reload | 5/2/2008 |
Q: I expect you to regard this as a ridiculous question but here goes: Is there any safety reason, a ...
A: Jim, Your idea has been tried in military organizations around the world, but not to my knowledge ...
|
| LOCATION OF SERIAL NUMBER | 5/2/2008 |
Q: I AM TRYING TO LOCATE THE SERIAL NUMBER ON A MOSSBERG MODEL 500A (NOT PRE 1968)
A: On shotguns, the "gun" is the receiver according to ATF - everything else (barrel, magazine, stock, ...
|
| Glock Barrel & reload | 4/29/2008 |
Q: I read you recent item in regards to reloading for the .40. I have two questions. Is the barrels you ...
A: John, I don't recall what barrels I've recommended, but KKM and Lone Wolf are good, and the Lone ...
|
| +P ammunition | 4/29/2008 |
Q: I am trying to find out if I can use 45 ACP +P AMMO in my Firestorm 45 ACP Gov't pistol. I can not ...
A: I believe these guns are manufactured in Argentina, and I don't have a great deal of confidence in ...
|
| revolver | 4/20/2008 |
Q: I hope you don't mind another question from me, I've come to value your opinions and suggestions and ...
A: Jade, The problem with 2" barrel revolvers is that muzzle velocity seldom exceeds 800 fps, which ...
|
| Old .22 and 12 ga. | 4/14/2008 |
Q: I have a couple of basic, beginner questions. I recently inherited a .22 rifle and a 12 ga shotgun ...
A: Michael, 1) Although your guns should be serviceable without any problem, I would have them looked ...
|
| Writer Research: Homemade Silencer? | 4/11/2008 |
Q: I am a writer, with several published works of horror/suspense to my name (www.james-newman.com, ...
A: Mr. Newman, Your basic premise is correct. Even a quality-made suppressor (the proper name) such as ...
|
| re: recoil spring | 4/10/2008 |
Q: I would like to ask your opinion and recommendation, I have here a rock island commander size ...
A: You will probably notice a difference in recoil, but the gun was designed for an 18# spring. If you ...
|
| Colt Agent 38 | 4/9/2008 |
Q: I saw a beautiful solid black matte Colt Agent .38 Special revolver the other day but learned it may ...
A: They do not make the Agent any more, or unfortunately any of those historic Colt DA revolvers. Colts ...
|
| re: magazine well for single stack | 4/8/2008 |
Q: I would like to ask your opinion and recommendation regarding installing magazine well for my ...
A: It is easy enough to remove the extractor of a 1911, although it generally really isn't necessary. A ...
|
| re: magazine well for single stack | 4/8/2008 |
Q: I would like to ask your opinion and recommendation regarding installing magazine well for my ...
A: There are several kinds of magazine wells that are easily taken on and taken off. The advantages of ...
|
| CZ-75 88 series 9mm | 4/4/2008 |
Q: I have a CZ-75 88 series 9MM, semi-automatic. When I fire a loaded 16 round mag. at times it will ...
A: The CZ 75 is a great pistol. Without seeing the gun, it is impossible to diagnose what the problem ...
|
| beretta modification | 3/30/2008 |
Q: I have beretta 92 FS; is it possible to convert it to 92 G (no safety), just by changing parts ...
A: John, I'm not a Beretta armorer. Per a colleague: It seems like this question gets asked on the ...
|
| Proper Breakdown and Assembly of S&W PC .460 | 3/21/2008 |
Q: I recently purchased the S&W PC .460. and I have a few questions that I hope you can help me with. ...
A: Mark, If you read my bio, you know that I'm not a hunting handgun guy; my expertise is in fighting ...
|
| 1911/45s | 3/20/2008 |
Q: I would like your thoughts on the STI 1911/45s, Escort & the Guardian. How good are they & will they ...
A: William, STI makes an excellent product. While computer aided engineer certainly mitigates some ...
|
| 1911 /45 pistols | 3/17/2008 |
Q: I own about nine 1911/45s , most all of them Springfields, Kimbers & STI Escort & Gaurdian. What is ...
A: William, I suppose that depends on what your definition of "best" is. Most of the modern guns are ...
|
| Springfield XD-45 holster | 3/13/2008 |
Q: I have been looking into the Level 3 Duty SERPA Auto Lock Holster made by Blackhawk, but the don't ...
A: Curt, The XDs have not caught on as duty guns, and so there are not many duty rigs for them. ...
|
| query realted to guns | 3/10/2008 |
Q: qus 1: can a pistol fire a bullet of 8mm/.315 bore? qus 2 : can one weapon fire both type of ...
A: 1) Although throughout the years there have been some pistols chambered in some form of 8mm (the ...
|
| SKS | 3/7/2008 |
Q: I own a Russian SKS. I want to put a red dot/or cross hair scope on it but still want to be able to ...
A: Eric, After market accessories for Russian military rifles are out of my experience, but I've ...
|
| Registration policies and CCW classes | 3/4/2008 |
Q: We live in Northwest OH and purchased a gun from a friend of ours. We know that the gun has no ...
A: I have no knowledge of Ohio law. In most of the country, law-abiding citizens are not required to ...
|
| Taurus 410 pistol | 3/3/2008 |
Q: I am thinking about getting my wife one for personal defense in the home. The idea is first two ...
A: That's hard to say, depending on a number of things. Have you (or your wife) shot one? It is rather ...
|
| Ammo for .357 | 2/29/2008 |
Q: I am looking for clarification as to what ammunition I can use in a S&W .357Magnum revolver. ...
A: Ray, No ammunition will be marked merely ".38" It will either be .38 Special (if it's a revolver ...
|
| FI Model D 380 jams | 2/26/2008 |
Q: Bought gun used, $200, Gun looks good, breaks down all pieces look good. gun looks like colt pony ...
A: I'm afraid you've learned by hard experience an unyielding principle of economics - you get what ...
|
| Bedside Gun Rack | 2/18/2008 |
Q: Have you seen the bedside gun rack http://www.the-backup.com? What do you think of the idea?
A: Al, I've seen this and other things like it. Having done some drills in which people are woken up ...
|
| gun value | 2/7/2008 |
Q: I would like your estimate of a Harrington&Richardson 22 cal. hand gun. It has a 12 inch barrel and ...
A: Although any gun that you have is better for self-defense than no gun, an antiquated design like ...
|
| The right one? | 2/4/2008 |
Q: Hey there, I received my concealed permit about a month ago and im not sure what is a good pistol to ...
A: In terms of "put down" power, all handguns are anemic and poor stoppers, so you need to be prepared ...
|
| Self Defense Shotgun | 2/4/2008 |
Q: I am keeping my question vague NOT in hopes of getting a long answer, but instead so I don't bog you ...
A: In terms of value for $, Mossberg is about the best. I've had a Mossberg 590 for years that has a ...
|
| westernfield pump 20 gauge | 2/3/2008 |
Q: I just picked up a 20 gauge for my son. It looks like a Mossberg 500 in build. The markings show ...
A: Nurmich cross reference shows most of these guns made by Mossberg with a few made by other companies ...
|
| varmint hunting | 1/29/2008 |
Q: Do you believe that a .22 Magnum could bring down a full grown coyote, or would you recommend ...
A: If you didn't care how long it took it die, a head or heart-lung shot from a .22 Magnum would kill a ...
|
| 9mm or .40 carbines | 1/28/2008 |
Q: what are the maximum rages for these two firearms?
A: Pistol caliber carbines do not really have an effective range beyond that of a handgun, or not much ...
|
| gun show loophole | 1/24/2008 |
Q: Don't you think it would be a good idea to close the gun show loophole? It doesn't seem right to me ...
A: Pam, I realize this is a very emotional issue for many people, but the fact is, there is no gun ...
|
| keeping handgun chambered | 1/24/2008 |
Q: I just started carrying a handgun. I always keep it loaded and chambered, not only when I'm ...
A: Eric, If you had asked me that question a year ago, I would have given you a different answer. My ...
|
| Jimenez Arms | 1/22/2008 |
Q: I recently purchased a J.A. 9m.m. I have heard some negative remarks regarding this particular ...
A: Patrick, Although my link specifically says that I won't answer questions about inherently unsafe ...
|
| S&W ported 357 | 1/15/2008 |
Q: I have a ported S&W 357, 4" barrel. I can't find another like it anywhere! What gun do I have? I can ...
A: The model number of your gun will be stamped inside the frame where the crane closes against it. As ...
|
| Remington 700 - 7mm.08 | 12/25/2007 |
Q: I recently purchased another Remington 700 in 7mm.08. It has a 24" barrel and I am thinking of ...
A: Jeff, For absolutely accurate stats, you'd have to consult ballistics tables, but I'll give you my ...
|
| guns&ammo | 12/21/2007 |
Q: can you use reloaded ammo with polymer handguns like GLOKS,SPRINGFIELD XD,S&W M&P,TAURUS 24/7 ...
A: Whether the gun is polymer-framed or not has no bearing on whether you can use remanufactured ...
|
| RE: change of grip | 12/20/2007 |
Q: I changed the recoil spring of my M1911 rock island commander size pistol with Wolff 16lbs. I notice ...
A: Wolff springs have been a standard in the industry since the 1970s. It is common to see Wolff ...
|
| RE: change of grip | 12/20/2007 |
Q: I changed the recoil spring of my M1911 rock island commander size pistol with Wolff 16lbs. I notice ...
A: Rickie, The Rock Island guns are good guns, but to be the bargain they are they had to skimp ...
|
| Handgun | 12/18/2007 |
Q: 40VE Sigma Smith and Wesson handgun. I like blackhawk holsters but they don't sell one for my gun ...
A: After Glock successfully sued S&W for patent infringement, Smith redesigned some of the Sigma's ...
|
| fac | 12/14/2007 |
Q: around 1200 ft per second and it says i need a PAL licence to buy it, my question is , ifi get my ...
A: I'm not sure what state you live in. I am unfamiliar with any of the documentation you mention. In ...
|
| Self-defense | 12/10/2007 |
Q: 1. Which is better for self-defense, semi-jacketed hollow points or jacketed hollow points (for .38 ...
A: Out of a short barreled .38, your best performing ammunition is going to be 125 grain Federal ...
|
| re: change of recoil spring | 12/3/2007 |
Q: I have been shooting for more than 1000rounds, just want to know when is the time to replace my ...
A: I would replace only with quality springs from a company like Wolff or ISMI. I'd also use only the ...
|
| savage .308 | 12/2/2007 |
Q: I have a savage striker .308 pistol for hunting. I would like to put a butt stock on it, but don't ...
A: Jason, There are two issues that pertain to your1) The factory stock cannot be easily modified; the ...
|
| Which rifle is best for me? | 11/28/2007 |
Q: I know your area of expertise is handguns, but a previous answer of yours led me to ask you a rifle ...
A: Justin, The 700 is a great gun. 300 yards is, in my estimate, a long shot for .270 simple because ...
|
| use of 45 ACP +P ammo | 11/28/2007 |
Q: This is Rickie Austria from the Philippines, I was on a firing range this afternoon to check if +P ...
A: The 1911 design was adapted by the US military in that year, but was designed by John Browning in ...
|
| single shot shot gun | 11/27/2007 |
Q: Do you think it is possible for a woman to commit suicide with a single shot shot gun and shoot ...
A: Elaine, I am so, so sorry for your loss. Why are the police not interested in investigating this? ...
|
| single shot shot gun | 11/26/2007 |
Q: Do you think it is possible for a woman to commit suicide with a single shot shot gun and shoot ...
A: No, not if the head wound was serious. People who commit suicide with a gun typically will ...
|
| CZ-52 | 11/24/2007 |
Q: I am thinking of buying a surplus CZ-52 in the 7.62x25.Do you have any info on the gun? Thanks in ...
A: Keith, My apologies, but as my bio says, I don't know much about old guns. If it were a regular ...
|
| CZ-52 | 11/24/2007 |
Q: I am thinking of buying a surplus CZ-52 in the 7.62x25.Do you have any info on the gun? Thanks in ...
A: Keith, If you are buying the gun simply for fun or as a collector, the gun has an interesting and ...
|
| Golden State Arms | 11/20/2007 |
Q: I have a Golden State Arms, Santa Fa Astor R-157, in 308 cal. and I am trying to find out any ...
A: Bill, I've never heard of that gun, but a quick web search turned up this from Guns & Ammo "values" ...
|
| 183D 410 shotgun | 11/18/2007 |
Q: I have this gun with two chokes med.&full I need too know which one to use when shooting slugs.
A: It should not really matter, but to be safe, I'd go with something other than the full choke. Be ...
|
| Springfield Armory XD-45 | 11/17/2007 |
Q: I just purchased a Springfield Armory XD-45.First I want to ask do you think these are good ...
A: Keith, I think generally the XDs are excellent guns. I have owned an XD45 Tactical, and one of my ...
|
| value of a remington shot gun | 11/13/2007 |
Q: what is the value of a remington shot gun, serial number 1529704? I think it was purchased new in ...
A: The only way to really know the value of the gun is to have it looked at by a gunshop, since the ...
|
| value of a remington shot gun | 11/13/2007 |
Q: what is the value of a remington shot gun, serial number 1529704? I think it was purchased new in ...
A: As the link you clicked on when you sent this question says, "PLEASE READ BEFORE SENDING QUESTIONS: ...
|
| shotgun | 11/10/2007 |
Q: Why do the shotgun barrels have to be at least 18" long?
A: Jenna, In 1934 Congress passed the National Firearms Act. This act restricted the ownership and ...
|
| Bretta 380 | 11/7/2007 |
Q: I recently inherited a Bretta 380 automatic pistol from my Dad. Is this a good pistol for personal ...
A: I don't know which model gun you have. The only Beretta .380 in current production is the Chetah. ...
|
| New to Guns! | 11/7/2007 |
Q: Just wondering what type of gun is good for home defense or to carry in a car for self defense. What ...
A: Andrew, Depending on who's sponsoring the gun show, they will have all kinds of brands there. From ...
|
| 10mm and .40 S&W | 11/5/2007 |
Q: I was wondering if .40 caliber bullets can be shot out of a Glock 20 10mm auto
A: Yes, the projectiles are the same size. The case lengths are different and the 10mm takes a large ...
|
| CC holster | 11/3/2007 |
Q: I just got my concealed carry permit. What is the best holster for me to use?
A: That is a tough question because ultimately you will have to be comfortable with how you carry. ...
|
| remington 700 adl | 10/28/2007 |
Q: i have a 7mm mag 700 adl that i bought new a month ago. will floating the barrel be worth it ...
A: I'm not sure what the stock is made out of, but generally speaking, yes, it usually improves ...
|
| re: shock-buff | 10/26/2007 |
Q: Just want to know if you can recommend me to put a shok-buff on my m1911 rock island commander size ...
A: Any of the standard shock-buffs would work. I'm most familiar with the ones by Wilson Combat. You ...
|
| Revolver Purchase | 10/23/2007 |
Q: I am interested in a general purpose handgun and believe a .357 magnum revolver would fit the bill. ...
A: Dave, I'm not a big revolver guy, though for what it's worth, I like all the ones you've mentioned. ...
|
| recoil spring of 1911 commander | 10/23/2007 |
Q: I'm Rickie Austria from the Philippines, I have here a rock island 45cal commander size pistol. I'm ...
A: I think you misunderstood me. If you want to REDUCE recoil, you need to REDUCE the weight of your ...
|
| recoil spring of 1911 commander | 10/23/2007 |
Q: I'm Rickie Austria from the Philippines, I have here a rock island 45cal commander size pistol. I'm ...
A: Rickie, I'm confused as to whether you are actually talking about the recoil spring or the hammer ...
|
| 44 special/magnum | 10/23/2007 |
Q: Greetings One of my pistols is a S&W 44 magnum model 29-2 (long barrel). This one is 10-15 years ...
A: Bill, That's very odd, and is hard to diagnose without actually seeing the gun. No .44 Spec load ...
|
| firearms question | 10/17/2007 |
Q: I am left eye dominant but shoot right handed. Is it possible to shoot an ar15 rifle right handed ...
A: Mr. Rolfe, To take your questions in order: 1) There is no practical way to shoot a long gun using ...
|
| Lead reloads w/ glocks | 10/10/2007 |
Q: I just finished reading the response you gave to Charles, regarding Glocks and reloading, but I have ...
A: Theoretically, perhaps, although a wire brush will not get all the lead out - you'll need a solvent ...
|
| Question about reliability | 9/28/2007 |
Q: I own a Taurus PT111 Millemium Edition 9mm. A while back while at the shooting range, the gun would ...
A: Michael, I have some familiarity with the PT111, but as an operator only. I do not know how the ...
|
| pistol modification | 9/25/2007 |
Q: I have here a m1911 rock island 45cal commander size pistol, with a novak sight and bull barrel. ...
A: Rickie, The Rock Island guns are usually pretty (old) milspec affairs. Most 1911s will shoot ...
|
| .38 Sp. Bullet Creep | 9/19/2007 |
Q: I own a S&W 642 Airweight revolver I carry daily. I carry Buffalo Bore 158 gr. +P LSWCHP for ...
A: Van, I'd recommend the Federal Nyclad 158gr. P. It should be very close in internal/external ...
|
| .38 Sp. Bullet Creep | 9/19/2007 |
Q: I own a S&W 642 Airweight revolver I carry daily. I carry Buffalo Bore 158 gr. +P LSWCHP for ...
A: Van, Although I wouldn't recommend that particular bullet configuration for self defense, I don't ...
|
| bbs stuck in barrel | 9/8/2007 |
Q: i have a 'colt double eagle' pistol bb gun. the bbs have go stuck in the barrel, what can i do?
A: Rich, I don't really know very much about toy guns (truth be told, some of the toys like the ...
|
| Glock Conversion to 22 cal | 9/6/2007 |
Q: What is your opinion on the conversions to 22 cal, to shoot as a hobby cheaper while using the same ...
A: They are ammo sensitive, and will not work with wimp rounds. One of the rounds they will work with, ...
|
| Glock Conversion to 22 cal | 9/6/2007 |
Q: What is your opinion on the conversions to 22 cal, to shoot as a hobby cheaper while using the same ...
A: Robert, Last year I was hoping to begin competition more seriously, and that meant more practice. ...
|
| defensive ammo types | 9/5/2007 |
Q: ive been boucing around the different types of ammo i use in my carry weapon, normally a 9mm (used ...
A: Zach, I am uncertain as to what you mean by "HS," unless that is your designation for the Federal ...
|
| reloading for glock | 9/1/2007 |
Q: In Richard Lee's Modern Reloading 2nd ed., in 40S&W specs, he warns not to fire reloads in Glocks or ...
A: Charles, Let me apologize in advance for the length of this answer. Your question can't really be ...
|
| Stevens shotgun modification | 8/29/2007 |
Q: I have a 20 gauge Stevens shotgun model 67 Series E that I have owned for 25 years. I'd like to ...
A: That depends on a great many things, including the choke the barrel now has (it will be a cylinder ...
|
| Missing parts for a PA-63 | 8/29/2007 |
Q: I have a FEG PA-63 9x18 Mak that has lost the extractor, the plunger and the plunger spring. Where ...
A: David, If you can't find the factory rep, Neumrich (ww.e-gunparts.com) will have them. These folks ...
|
| Stevens shotgun modification | 8/28/2007 |
Q: I have a 20 gauge Stevens shotgun model 67 Series E that I have owned for 25 years. I'd like to ...
A: Dave, If you can find one your best bet would be at www.e-gunparts.com. If you cut it down, I ...
|
| question about a s & w | 8/14/2007 |
Q: i have a .38 smith and wesson and im trying to find a manufacture date i understand that u cannot ...
A: Zack, Go to the Smith & Wesson website, to "Customer Support" and scroll down to the question, "How ...
|
| wondering if you can answer some ????s | 8/12/2007 |
Q: my niece was shot with a .22short hand gun.wondering if she could have done it her self.direct in ...
A: Clorinda, I am very sorry for you and your family. You don't give me a lot of information, but ...
|
| Browning bdm | 8/11/2007 |
Q: i'm writing an espionage book and my protagonist needs a handgun. i was thinking about the Browning ...
A: Giuila, Oliver Winchester, founder of the Winchester Repeating Arms company, summed it up well when ...
|
| Tanfoglio giuseppe | 8/10/2007 |
Q: I have the 9mm version and my firing pin is not working. I am not knowledgeable enough to repair ...
A: Karen, The Tanfalgio copies of the CZ pistols are quality firearms, and not difficult to replace ...
|
| I am looking for oa good pistol | 8/9/2007 |
Q: I am looking for a pistol that is lightweight, durable, and packs a good punch.
A: I'm assuming you want to carry this for protection (carrying would be the only reason for a ...
|
| Duck hunting/North Dakota | 8/8/2007 |
Q: I need to know if if I can use a shotgun to hunt ducks in North Dakota if I was charged with a ...
A: Were you charged and acquitted, charged and convicted, or have the charges yet pending? I am not a ...
|
| Advantage Arms .22 Conversion | 7/3/2007 |
Q: I was wondering if you are familiar with the Advantage Arms .22 conversion kit for the Glock 29. I'd ...
A: Mr. Jones, I noticed that the AE service filtered out part of my answer. My suggestion was that if ...
|
| Advantage Arms .22 Conversion | 7/3/2007 |
Q: I was wondering if you are familiar with the Advantage Arms .22 conversion kit for the Glock 29. I'd ...
A: Mr. Jones, I am familiar with the AA conversion and have one for a G17. It works as reliably as ...
|
| long range rifles | 6/27/2007 |
Q: I recently inherited a remington model 760 .35 cal with a renfield 4x scope with a quickswitch ...
A: I have no preference for which gun you get. Guns are task specific tools. Hammers make poor ...
|
| long range rifles | 6/26/2007 |
Q: I recently inherited a remington model 760 .35 cal with a renfield 4x scope with a quickswitch ...
A: Well, John, the .35 certainly has more "oomph" than, say, a .30-30, but a 300 yard gun it's not. ...
|
| Home defense | 6/21/2007 |
Q: Zukowski I am looking to purchase a couple of weapons for home protection. A friend recommended a ...
A: As this came to me, I will be glad to answer to the best of my ability, but I am not Mr. Zukowski. ...
|
| magazine charging | 6/9/2007 |
Q: I read with interest about changing magazine springs on an annual basis...need them or not...but ...
A: Alan, I must say that though I have preached this, I don't practice it. Once upon a time before ...
|
| sw 629 born in 1988 | 6/7/2007 |
Q: Just inherited a stainless and it is a pain to keep clean. Second, I like open sights but would a ...
A: John, If by "pain to keep clean" you mean the carbon rings on the cylinder face, once it is wiped ...
|
| Guidance Please | 6/5/2007 |
Q: I am a 60 yr old male, in Phoenix, AZ USA area. I am on disability due to back problems and MS ...
A: Bob, Thank you for your kind words. Any good gun shop will spend as much time as you need teaching ...
|
| Guidance Please | 6/3/2007 |
Q: I am a 60 yr old male, in Phoenix, AZ USA area. I am on disability due to back problems and MS ...
A: Bob, If you wear a shirt on the outside (T shirt or untucked Hawaiian shirt), and IWB holster would ...
|
| Guidance Please | 6/2/2007 |
Q: I am a 60 yr old male, in Phoenix, AZ USA area. I am on disability due to back problems and MS ...
A: Sir, The Glock 19 is an excellent choice, for a number of reasons. Not only is it easy to use as ...
|
| SERIAL NUMBER ON 38 DETECTIVE SPECIAL | 5/28/2007 |
Q: I AM WRITING A NOVEL SET IN THE 1930'S. CAN YOU TELL ME IF BACK IN THOSE DAYS, A 38 DETECTIVE ...
A: Janis, Sorry it took me so long to get to you. Guns have been serialized since that industry ...
|
| Explanatory question and Reiteration | 5/27/2007 |
Q: "I have already answered this question for you once before." is the reply I received from ...
A: Sir, You continue to send your question to the same person, rather than a different "expert" as you ...
|
| Jimenez 9 mm - question | 5/9/2007 |
Q: My husband bought this gun only a few months ago from a pawn shop. We found out that it is a very ...
A: Brittney, I would recommend that you get rid of the gun through sale or some other means. As you ...
|
| First Handgun | 5/5/2007 |
Q: My head is spinning with my choices for my first SA handgun. Primary use will be indoor range with ...
A: The M&P is new, and I don't have a lot of experience with it, but the trigger seems a bit better ...
|
| First Handgun | 5/5/2007 |
Q: My head is spinning with my choices for my first SA handgun. Primary use will be indoor range with ...
A: Amador, I was just putting together a list of observations from the past training year of what guns ...
|
| better triger | 4/29/2007 |
Q: I am really starting to enjoy this forum. I can ask questions that dealers give you the are you ...
A: The trigger on the lower has absolutely nothing to do with the upper assembly. Unless the springs ...
|
| Handgun breakdown | 4/23/2007 |
Q: Sir; I need the proper breakdown procedure for a Smith & Wesson model 410S. I thought I knew it, but ...
A: Mr. Garvey: The 410 should field-strip like nearly every SW auto based on the Model 59 design: 1) ...
|
| Ruger MK111 | 4/22/2007 |
Q: I have a Ruger MK111 standard with a 5 3/4 inch tapered barrel with fixed sights.Can I install ...
A: I'm not familiar with exactly that model. Sights from Hi Viz or Tru Glo would probably be your best ...
|
| Kahr Pm9 | 4/22/2007 |
Q: I have the exact same problem as Tom Kennedy back in October 2005 with my new Kahr Pm9. After 500 ...
A: Bob, Unfortunately, when you buy a new design, you get to be the guinea pig. It takes some ...
|
| WHY ? | 4/18/2007 |
Q: Why would the shooter at Virgina Tech have wanted to file the serial numbers off of the guns he used ...
A: Al, This young man had obviously for a long time been creating a hate-filled fantasy world in his ...
|
| Taurus PT 24/7 .45 | 4/16/2007 |
Q: I have just bought a used Taurus PT 24/7 .45.I have heard some good and bad things about them.Could ...
A: Keith, Taurus is quite proud of its 24/7 - if you look at their website, I think you can still find ...
|
| Ranger Shotgun Manufacturer? | 4/7/2007 |
Q: I have my father's old Ranger 12 GA choke shotgun, and am trying to restore it, but can not find who ...
A: Bryan, Antique guns are out of my area, but I believe that the Sears Ranger guns were those mfg'd ...
|
| Handguns | 3/22/2007 |
Q: I'm in the market for something in a .40 or .45, mainly just for home security and taking to the ...
A: Adam, Given your criteria, I'd take a close look at the Springfield XD40, or XD45. These are ...
|
| Colt Agent .38 | 3/12/2007 |
Q: Good evening, I was trying to find out if I can use the .38 Special+P's in my Colt Agent. The box ...
A: Stacy, Colt revolvers in that company's "D" frame were among the most delicate revolvers made. I ...
|
| remington sendero rifle | 3/5/2007 |
Q: I am consideriing buying a Remington Sendero rifle in 7mm mag. I will be using this rifle ...
A: Mr. Baker, Remington bills that rifle as their most accurate off-the-shelf rifle. I would expect it ...
|
| tanfoglio | 2/20/2007 |
Q: a few days ago i purchased a used mod. tz75 9mm parabellum tanfoglio. before seeing it i have never ...
A: Ben, Before the Czech Republic was free of the Soviet Block, CZ produced a pistol that was, for a ...
|
| Personal Defense Concealed Handgun | 2/11/2007 |
Q: After visiting a few forums comparing HKs & Sid Sauers, I decided I would choose a Sid because of ...
A: Mike, For a concealed carry gun, the SIG 239 is about the only that will fill the bill. All the ...
|
| Barrel Modification | 2/11/2007 |
Q: I have a question about fitting a Storm Lake drop in barrel for a Glock 29. When I first dropped ...
A: Matt, Until you get this problem solved, you should stop shooting the gun with that barrel in it. ...
|
| hammer | 12/30/2006 |
Q: What is the purpose of the hole in the exposed hammer of a hand gun?
A: Steve, Hammers don't need much mass - the spring is what really causes the ignition. Holes in ...
|
| Training | 12/30/2006 |
Q: I'm a CCW permit holder and I've taken several training classes on handgun safety and ...
A: Matt, Insights Training Center operates out of Seattle, and holds classes around the country. ...
|
| handguns/nigh tsights | 12/18/2006 |
Q: I live in Alaska and am a wilderness, interpretive guide for NPS, in Denali Nat'l Park, about 6 mos ...
A: George, First of all, all of your choices in firearms are excellent ones. When you get your G23, I ...
|
| 357 sig | 12/16/2006 |
Q: do you know anything about this caliber? compaired to a .40 s&w or a .45acp?
A: Charles, The .357 SIG is actually a .355 or 9mm projectile, housed in a .40 S&W case that has been ...
|
| rifle stock | 12/15/2006 |
Q: Is there any formula for calculating the length of pull based on forearm and hand size of the ...
A: To do this right, you need to go to a gunsmith, who will use some old but sophisticated instruments ...
|
| JA-.380 | 12/14/2006 |
Q: I just bought a JA-.380 now I have just herd bad new about it. Is the JA-.380 a bad gun or a ok gun? ...
A: Keith, There is a class of gun the selling feature of which is only price. Jiminez Arms is one of ...
|
| Taurus Long barreled 357 | 12/12/2006 |
Q: Is there anywhere I can find the national standard for gun Makers about the weight? of the trigger? ...
A: Deb, I do not know what you mean by "national standard for gun makers about the weight of the ...
|
| recoil reducers - handgun (Kahr 40?) | 12/9/2006 |
Q: Will the additojn of a recoil reducer,as in Harts, have a significant effect on recoil, or is this ...
A: Greg, There are two types of recoil reducers for handguns, ones that work mechanically, and ones ...
|
| universal M1 carbine | 12/6/2006 |
Q: My dad is giving me his Universal M1 carbine.We shot it about 3 mos ago and it jammed about every 5 ...
A: Keith, I'm not sure where to tell you to look about manufacture - you might try calling the ...
|
| damage | 12/1/2006 |
Q: I got a question... me and my teacher were arguing about what will do more damage at 25 feet. A .50 ...
A: That is a very intriguing question, because it certainly is a comparison of apples with oranges. ...
|
| Identify vintage & value of my S&W | 12/1/2006 |
Q: I have a blue S&W 38 with 6" barrel and the following markings. Right front of frame, Made in ...
A: Mr. Fields, Please read my profile, viz. the part that says in bold "I cannot identify antique guns ...
|
| Suppressor Legalities | 11/29/2006 |
Q: A few friends and I, all firearms enthusiasts, have recently become interested in the addition of ...
A: Dan, Are guns still legal in Maryland? (Only kidding, I shoot and conduct classes in MD). Sound ...
|
| Police positive? | 11/24/2006 |
Q: I have a pistol that says: Harrington & Richardson Arms Co. Winchester ...
A: Mr Wolff, Old guns are really not my thing. This from Chuck Hawes: Smith and Wesson devised this ...
|
| M14 versus Mosin Nagant - Accuracy? | 11/24/2006 |
Q: My son (14) asked me a question that I had no idea on how to answer. He asked me which rifle was ...
A: The rifles' power are very similar. The 7.62x54 Russian has virtually equivelant ballistics to the ...
|
| Who made this gun? | 11/21/2006 |
Q: i DO NOT KNOW WHETHER THIS GUN IS OLD OR ANTIQUE, BUT HAVE STAMPED INFORMATION ON SIDE OF THE ...
A: Sarah, Back when Czechoslovakia was a soviet block country, a firearms co. going by CZ made a very ...
|
| Calibre changes on Sigs | 11/20/2006 |
Q: Is it true that one can change the calibre on certain Sig-Sauer pistols? If so, what models can be ...
A: Ed, When SIG came out with the .357 SIG caliber, they were making available .40 S&W barrels. ...
|
| hair triggers | 11/20/2006 |
Q: How common are hair triggers , specially on a 380 ? can they really just go off. and how do you know ...
A: Mr. Vera, "Hair trigger" is a Hollywood term that generally refers to a light trigger, but the term ...
|
| home protection shotgun | 11/12/2006 |
Q: I looking into buying a 500 series mossberg primarly for home protection. Id like to swap barrels ...
A: Kevin, The Mossberg guns are an excellent value for the money. I am partial to the 590. The ...
|
| norinco jw15 22lr magazine | 11/6/2006 |
Q: my grandson lost his magazine to his 22 rifle. It is a chinese made "norinco" model jw-15. I have ...
A: Mr. Schreiber, Try here: http://www.e-gunparts.com/product.asp?chrProductSKU=299750B&MC= This is ...
|
| bullet safety | 11/4/2006 |
Q: i took all the bullets from my husbands guns. how can i safely store them? i was just going to put ...
A: Gina, If I were you, I would dispose of the ammunition. You can do that by taking them to the ...
|
| military rifiles | 10/30/2006 |
Q: GCH, I was wondering what the caliber of the AR-15, AK-47, and the C-14 rifles are. thanks for any ...
A: AR-15 in its military config is 5.56 NATO (externally identical to .223 Rem). It can also be had in ...
|
| Handgun Advice | 9/4/2006 |
Q: Which handgun, ammunition, and holster would you recommend for concealed close protection? Obvious ...
A: I really cannot pick another person's handgun for him. Different people value different ...
|
| gun modification | 9/3/2006 |
Q: We have all been involved in the modify/don't modify your self defense/CCW gun at one point or ...
A: FOLLOW UP TO THIS: Correction. The case I mentioned was an accidental shooting. The prosecutor ...
|
| Walther P38 handgun | 8/23/2006 |
Q: Olympia, Washington. Basically I am looking for information on the handgun I found in my father's ...
A: Mr. Partlow, As stated in my profile, "I CAN NOT identify antique guns or those that are old and ...
|
| CCW Bersa vs. PPK | 8/22/2006 |
Q: Sir, I was wondering if you can... 1. Tell me the main differences, pros, cons, and personal ...
A: Lt. Barbour, First let me address the caliber question. The current trend (with which I agree) is ...
|
| Handgun model safety | 8/21/2006 |
Q: My name is Joe and I live outside of Orlando Fla. recently relocating from up north. I have recently ...
A: Unfortunately, the gun's reputation is well deserved. Jimenez, Lorcin, Jennings - they're all junk ...
|
| Tis a Question | 8/1/2006 |
Q: This is the closest thing to airsoft category I could find. All I need to know is this. Can I get a ...
A: Zach, We use the AirSoft gas guns in force-on-force training. The guns we use are very close ...
|
| fireing pins | 7/27/2006 |
Q: are the newer revolvers with the transfer bar fireing pin superior to the older revolvers with the ...
A: Mr. George, Transfer bars on revolvers have been used by companies like Ruger and Taurus for at ...
|
| Pistol question | 7/10/2006 |
Q: I just purchased a Colt 1911 from my good buddy. Sadly, my buddy does not take very good care of ...
A: Brandon, I'm not sure what your expectations are, or how bad a shape the finish of the gun is in. ...
|
| dismantaling a hi point 40 s&w | 7/8/2006 |
Q: I cant for the life of me figure out how to remove the slide from my weapon. i have tried everything ...
A: Mr. Pettis, You will need to expose the takedown pin toward the rear of the frame under the slide. ...
|
| Caliber for Concealed Carry | 7/2/2006 |
Q: I have owned a Kahr PM9-9mm for less than a year. The size and weight are ideal for concealed carry, ...
A: Mr. Kennedy, If you have decided on a Glock 27, then you've already picked your caliber - .40 S&W. ...
|
| wolf ammo | 6/13/2006 |
Q: i have just read a post you wrote to gentleman inquiring about ammo for an sks for home defense. it ...
A: Dan, I don't remember the exact post you're refering to, but I'm not a big fan of Wolff ammuntion. ...
|
| Smith & Wesson Sigma SW9C | 6/7/2006 |
Q: I’m interested in buying a used Smith & Wesson Sigma SW9C. However, I’ve read some comments on the ...
A: Gary, The original Sigmas in the 9mm and .40 were such a close copy of the Glock that Glock ...
|
| Re-Bluing | 6/1/2006 |
Q: I've got a S&W model 5904 that I was thinking of re-bluing. It's just the slide that shows a lot of ...
A: Jeremy, I believe the 59 series of S&W's have an aluminum frame, so you couldn't reblue that if you ...
|
| Info on a rifle | 5/27/2006 |
Q: Hey, I live in Alabama and have this rifle that I need to know info on. It is a Amadeo Rossi pump ...
A: Jennifer, This is a little out of my area, but Rossi is an arms company based out of Brazil. The ...
|
| In your opinion, what is a... | 5/27/2006 |
Q: In your opinion, what is a good, reliable conceal carry gun to have? Should I get a revolver, or a ...
A: Gerald, The issue of whether to get a revolver or a semi-auto is a personal decision that involves ...
|
| sawed off shotgun aow | 3/10/2006 |
Q: what would a guy have to do to get a bulged barrel sawed off AND LEGAL, who do i talk to ect. ...
A: Troy, Federal law requires that a shotgun barrel be at least 18" long. As long as it's not cut ...
|
| RUBBER GRIP REMAOVAL ? | 3/5/2006 |
Q: I just bought a new Smith & Wesson 360sc AirLite .357mag. It came with standard rubber grips. My ...
A: Mr. Monaco, A tool should have come with your gun for removal. If you bought it used and it didn't ...
|
| Sig 226 vs 226DAK | 2/13/2006 |
Q: I've been looking into buying a sig 226 and my big question is what is the advantage of the DAK. ...
A: Pat, The SIG DAK stands for "double action Kellerman" after the man who invented it. It is a ...
|
| Parts kits laws | 2/11/2006 |
Q: I don't suppose you know the federal laws on parts kits these days? I'm thinking about going the ...
A: There's not enough information here for me to answer your question. A parts kit to make what? It ...
|
| home defense question | 1/20/2006 |
Q: I purchased an SKS for my family for home defense. I am having a dilemma choosing what type of ammo ...
A: Daniel, The 7.62 X 39 is the old Soviet block intermediate cartridge, its nearest western ...
|
| WEIGHT & POWER | 1/19/2006 |
Q: ------------------------- Followup To GCH Hi its me again! I understand what you said about the ...
A: Mr. Monaco, The term "magnum" doesn't really mean much. It usually designates an already existing ...
|
| MEDIUM MAGNUM | 1/16/2006 |
Q: I own two 9mm pistols and have c/c/carry permits for both. Carrying one or the other is somewhat ...
A: Mr. Monaco, For a light, small gun, you might consider the Kel-Tec P.32 to P-3AT (chambered in .32 ...
|
| north american brand .22 black powder revolver | 12/7/2005 |
Q: I have a little 5 shot stainless steel black powder revolver. it uses 30 gr .22 slugs, and 3 gr of ...
A: Mr. Feldmann, Blackpowder and smokeless powder work by completely different mechanisms. ...
|
| barrel lenght | 12/3/2005 |
Q: I want to buy smith and wesson 22A chambered with .22LR bullet and 7 inches barrel lenght. But the ...
A: Mr. Cornico, I do not believe that there will be any intrinsic difference in accuracy between the ...
|
| Duty Weapon | 12/1/2005 |
Q: First thanks for being here to help, Im becoming a chicago police officer, i need to buy a gun and ...
A: Steve, That's too bad re: dept policy about Glocks. In terms of reliability, usability, practical ...
|
| Duty Weapon | 12/1/2005 |
Q: First thanks for being here to help, Im becoming a chicago police officer, i need to buy a gun and ...
A: Steve, Congratulations on your new job. Can you tell me what your duty weapon will be? I take it ...
|
| Singleshot rifle opinion. | 11/26/2005 |
Q: what are some of your opinions on good singleshot rifles for accuracy and distance(300+yrds.) for ...
A: Single shot hunting rifles are not really my areas of expertise. However, I don't think a ...
|
| revolver load | 11/12/2005 |
Q: -------------------------Thank you for inlighting me about this matter. I really thought all the ...
A: Mr. Cornico, In theory you should be able to fire a .22 Short out of a .22 LR chambering in a ...
|
| revolver load | 11/12/2005 |
Q: I just bought a taurus revolver magnum .22 4" barrel. Actually I intended to use this on a .22 LR ...
A: Mr. Cornico: Owing to the relationship between the .38 Special and .357 Magnum, and the .44 Special ...
|
| holsters | 10/13/2005 |
Q: I've been looking at gun shops and online for a LEFT-handed holster to (legally) carry my HK P7M8, ...
A: Brian, I'm very sorry for the trouble you are having with your H&K. They are usually pretty good ...
|
| S&W Model 637-2... .38 Spec. +P | 10/10/2005 |
Q: Sir, I am quite familier with guns, haveing grown up in a hunting and shooting family, served in the ...
A: First, let me thank you for your service to our country in the military, and your service to one of ...
|
| speed loaders | 9/30/2005 |
Q: I am glad I found your website. I have been searching for some time now for a product to charge ...
A: Mr. Wethington, It sounds like your search has been very thorough. Unfortunately companies make ...
|
| bore care | 9/20/2005 |
Q: How often should I use a stainless steel bore brush to my hand gun when I fired them about 100 ...
A: Mr. Cornico, For ease of cleaning, jacketed, or even plated bullets (almost as cheap as lead) are ...
|
| Selling Guns from an Estate | 9/12/2005 |
Q: My brother, who died a year ago, left behind a variety of handguns. I am encharged with selling ...
A: Jim, I'm sorry for your loss. A good place for you to start would be ...
|
| Caliber | 8/23/2005 |
Q: What does ACP stand for when listed after pistol caliber? Thank You, Jerry
A: Jerry, Many calibers have some sort of designation with them besides thier diameter in inches (e.g. ...
|
| Kahr PM9 Jamming | 8/6/2005 |
Q: I recently purchased a Kahr PM9 for concealed carry. Actually on your advice. It seemed like the ...
A: Mr. Kennedy, I'm sorry that you having such a problem with your Kahr. They are usually ...
|
| Best Concealed Carry Weapon | 7/15/2005 |
Q: GCH, In your opinion which firearm would be the best concealed carry type, the Walther PPK/S, ...
A: Mr. Kennedy, Given those choices, I would opt for the G26. Although both the PPK and PPK/S are ...
|
| BERETTA | 6/20/2005 |
Q: I INHERITED A 60TH ANNIVERSARY, COMMEMERATIVE BERETTA FROM THE MARYLAND STATE POLICE [SERIAL # 004]. ...
A: Dr. Kessler, I am more of a user than a collector (they're just tools to me), but commemorative ...
|
| kukiwan | 5/21/2005 |
Q: I need the address for submittal for my daughter's tae kwon do black belt (1st degree) for her ...
A: Mrs. Taflinger, I almost hit the "This question is out of my area" icon, until I read "frustrated ...
|
| Weever vs. Isosceles | 4/28/2005 |
Q: I read a manual by a firearms instructor who stated that Isosceles is a superior tactical firearms ...
A: John, At one time the hot topic for debate was "which stance?" FBI, Weaver, Iscosceles, Modified ...
|
| Guns | 4/19/2005 |
Q: Which type of gun had the most impact on society?
A: Adrian, A very interesting question. I think that the firearms technology that has had the most ...
|
| new handgun | 3/4/2005 |
Q: the other day I went out and bought a handgun secondhand that appeared to be in perfect shape which ...
A: Jake, I'm sorry to have to be the bearer of bad news, but Jennings/Raven/Tec etc. guns are not well ...
|
| JC Higgins Model 85 22 Cal Long Rifle Pistol | 2/15/2005 |
Q: I need to know if you can give me any ideas where to find grips for this pistol - it was purchased ...
A: Debra: Antiques are a bit out of my area, but for what it's worth: Your best bet would be to try ...
|
| Beretta 92 Slide Swap | 2/10/2005 |
Q: GCH, I own a Beretta 92 9MM manufactured early 90's. Made in Italy. I've seen Beretta 96 .40 S&W ...
A: Nelson, Theoretically it should be possible, but I'm not sure what changes Beretta may have made to ...
|
| looking to get a car-15 style ar15 rifle | 1/24/2005 |
Q: i have some questions about buying myself a car-15 style ar15 rifle or just a small ar15 carbine if ...
A: Vinnie, You can do a lot of good shopping right on the internet. I concur with your choice of a 16" ...
|
| .22 handgun | 1/4/2005 |
Q: I have a discussion going on w/ my dad about a potentially dangerous situation in my husband's tech ...
A: Mrs. Martin, Thought it's been a long time since I've been there, It appears I grew up in your neck ...
|
| Springfield Armory Pistols | 1/3/2005 |
Q: Springfield Armory company says their pistols have been parkerized (instead of the typical bluing) ...
A: Roy, Parkerizing was developed before WWII (by, you guessed it, a fellow named Parker). ...
|
| kimber 1911 | 1/2/2005 |
Q: GCH ,hope you had a good and safe new year.my question is about the kimber tle/rl11.I recently ...
A: Todd, This is a follow-up, since I missed part of your question, viz. "What is the most reliable ...
|
| Need some help from an expert | 1/1/2005 |
Q: I'm looking into purchasing a firearm for self defense, but not sure which kind to get, in that im ...
A: Ivan, You've already done a lot of research, so I'll give you my opinions. For a self defense ...
|
| accuracy for the money | 12/18/2004 |
Q: Good day sir, i am 20 years old and going into the marines and i want to become a sniper for force ...
A: Charles, First of all, let me thank you for your service to our country. It's generations of fine ...
|
| stun guns | 12/15/2004 |
Q: I am not sure if this is out of your area or not, if so, I apologize...but..I need to know what the ...
A: Julie, I am afraid I don't know a great deal about different models of stun guns. Reports indicate ...
|
| carbine | 12/1/2004 |
Q: what exactly is a carbine
A: John, That's a very good question. It's kind of like asking "What's a chair?" In other words, can ...
|
| JC Higgins Shotgun Value | 11/20/2004 |
Q: I have A JC Higgins Model 20-12 Guage 583.2005 Is it worth Anything ?
A: Mr. Soldwish, While Sears sporting guns are a little out of my area of study, I'll tell you what I ...
|
| Handgun snake shot loads | 11/14/2004 |
Q: I have seen many advertisements for "snake shot loads" for handguns. I have been tempted to ...
A: Eric, I don't believe the "snake shot" rounds can harm your barrel. They do not work like a ...
|
| Please Help | 11/1/2004 |
Q: I am a student from the University of North Carolina at Wilmington, and currently a friend is being ...
A: Danielle, From the standpoint of the gun's ability, yes there is a difference between and AirSoft ...
|
| Handgun | 10/29/2004 |
Q: What gun would you recommend to buy for self-defense? Thanks for your time
A: Mr. Qourzal: I would need to know more of your situation and specifics to give you a specific ...
|
| AK 47 /AR 15/ FN FAL/ Mini 30 | 10/5/2004 |
Q: Greetings. (1) Is the AK 47 as accurate a rifle as the AR 15? Does it have the same range? (2) ...
A: Mike: I like the AR15 a great deal, but I'll give you my evaluation of each of the rifles you've ...
|
| .357 SIG Over Penetration | 10/2/2004 |
Q: With all the research I have recently completed on the Speer Gold Dot .357 SIG round, and its ...
A: In my humble opinion, the .357 SIG has very few self-defense or law enforcement applications. The ...
|
| Carry Pistol | 9/20/2004 |
Q: I am looking into a ccw pistol for myself (age 51 female). I have looked at the H&K 2000 series ...
A: Sherri, The guns you're considering are all top-quality guns. In the case of all them, provided ...
|
| Grendel P-30 | 9/15/2004 |
Q: I have been trying find information on the Grendel P-30 .22 magnum. I have found very little ...
A: Mr. Hansen: I considered clicking the "This is outside my expertise" button, since I have no ...
|
| Handguns | 9/4/2004 |
Q: GCH, I am interested in purchasing a decent quality inexpensive handgun for home protection {around ...
A: Ron: In your situation, I would recommend a revolver. A revolver is much simpler to load and ...
|
| guns and ammunition | 8/23/2004 |
Q: I'm an American mystery author, and I need to know if it was possible in 1944 for an expert to tell ...
A: Doreen: Your question is beyond my expertise, but I will give you what little help I can. You'll ...
|
| lanyard for pistol | 7/19/2004 |
Q: I have a CZ85 9mm and just purchased a quality lanyard for it. However, there is no accomodation ...
A: Joan: Lanyards, which were once "standard equipment" on pistols, went away for a while, and now are ...
|
| Police firearms | 7/3/2004 |
Q: I'm writing a short story, and wondered if you could tell me what the standard issue for LA cops is ...
A: Joe: 1) As I do not do any work with LA, I do not know what their issue is. According to the rags, ...
|
| Handgun refinishing | 7/1/2004 |
Q: I currently carry a .32 Beretta Tomcat, daily, with a black factory finish. Unfortunately, my ...
A: Curtis, First, you should know that holster wear is unavoidable in a gun carried daily. Although ...
|
| sig-226 | 6/4/2004 |
Q: hey GCH ,I am considering buying a sig-226 in .40 cal. for self defense and recreational shooting .I ...
A: Todd, SIG's are excellent handguns, and objectively as good as the top picks out there (Glock, H&K, ...
|
| best pistol for me | 5/28/2004 |
Q: hey whats up im vinnie iam soon going to try and get a conceal carry permit and then off to picking ...
A: Vinnie, It is not possible for someone to pick a gun for another individual. Anyone who tells you ...
|
| i need your opinion on a gun/caliber for self-defense | 5/23/2004 |
Q: I am lhaving trouble deciding a caliber for self-defense. Ive read about the ups and downs of em ...
A: William, In the days when the only ammuntion available was full metal jacket ball, the diameter of ...
|
| Firearm Finishes | 5/11/2004 |
Q: What type of finish do you think would be prudent for an individual desiring low maintenance, great ...
A: Mr. Nichols: Bluing is not particularly rust-resistant or maintenance-free. "Satin" finishes such ...
|
| guns and ammo | 3/26/2004 |
Q: i know that with a .357 revolver you can still use .38 but can you do the same with a Glock .357???
A: Brian, In a stunning upset in the industry, Glock was the first firearm to be chambered in the ...
|
| Derringer | 3/7/2004 |
Q: I was thinking on purchasing a "Texas Defender" derringer. I believe one barrel is a .410 shotgun ...
A: Mr. Eidson, I have no experience with this particular gun, but in general I am not in favor the ...
|
| I know a whole lot about auto... | 3/2/2004 |
Q: I know a whole lot about auto pistols, but very little about revolvers. I know that my Glock will ...
A: Jason, First of all, let me commend you on your choice in a revolver. Although not a big revolver ...
|
| Remington 700 and L1A1 (FN FAL Variant) | 2/24/2004 |
Q: Greetings sir! I had a bunch of questions regarding the Remington 700 (.308) and the L1A1 (FN FAL ...
A: Michael, First, let me say that I think that the best home defense gun for most home-owners who ...
|
| Sniper Rifle/Scopes/Maximum Ranges/LE vs Mil? | 2/12/2004 |
Q: Greetings sir. I have some questions on sniper rifles. (1) What makes a rifle qualify as a "sniper ...
A: You honor me too greatly with the appellation “expert” when it comes to sniper rifles. The courses ...
|
| Tokarev pistols: reliability, conversion to 9mm | 1/14/2004 |
Q: How good is the Tokarev pistol, re accuracy, reliablity? How well do 9mm conversion kits work with ...
A: I am not very impressed with the Tokarevs, and have seen a number of problems develop when the ...
|
| worn out magazine springs | 1/5/2004 |
Q: I have a Heckler & Koch USP that has lately developed the habit of jamming on the last round in a ...
A: Josh, The H&K USP is an excellent gun, and I have not heard reports of problems with their spings. ...
|
| The spring in the magazine | 12/28/2003 |
Q: I have a CZ-85 B 9mm, my question is more of a curiousity type. How long can a handgun magazine ...
A: Jay, Before the advent of modern metalurgy, this was a real issue. There were reported instances ...
|
| Gun selection | 10/13/2003 |
Q: I'm about to shop for a new gun and I'm unsure what to get. Can you help? I now own a Ruger 357 ...
A: David, It sounds like what you want is commonly referred to as a "plinker" - something to shoot at ...
|
| Rifle Accuracy (What is the most accurate rifle?) | 9/23/2003 |
Q: Good day sir. What is the most accurate rifle you know of? Is there a rifle with un-erring ...
A: Accuracy is a function of a number of things, including the inherent optimization within the design ...
|
