You are here:
| Subject | Date Asked | Expert |
| Serial number on M1 Garand | 3/28/2009 | Bob H. |
| Q: I purchasedan M1 Garand in 02 to give to my Dad who passed away 2 weeks ago and the rifle came back ... A: The blue book should have the info you need. Here is the link for your specific section which can be ... | ||
| browning sweetsixteen | 3/27/2009 | Paul Edward Zukowski |
| Q: Hey Paul, My question is about a sweet sixteen shotgun I was givin as a gift buy my father when I ... A: You can get a historical letter from Browning ... | ||
| Question about Muzzel Vol. and Bullet Speed | 3/27/2009 | Bob H. |
| Q: I have my ccw and I am looking at allot of different ammo to carry. I carry both a 380, 9mm and 45. ... A: There are many books, articles, and videos on this subject. There are literally dozens of factors to ... | ||
| Id stevens 22 | 3/26/2009 | Rick Gore |
| Q: Rick, I have a octagon barrel Stevens 22 long rifle serial #467. Can you tell me the name of the gun ... A: http://www.savagearms.com/30g.htm http://www.thefirearmsforum.com/showthread.php?t=43779 ... | ||
| Lefever Arms. Co. 26" Barrel Double Trigger Nitro Special | 3/26/2009 | Doug Little |
| Q: Would you please send me any information that you have on a Lefever Arms Co. 410 Nitro Special, Side ... A: Rhonda, I'm sorry I don't have too much info, but I'll tell you what I know. LeFever Arms was an ... | ||
| Shelf life of Bullets | 3/26/2009 | GCH |
| Q: I have a 38 special revolver and have bullets for it that have been around for a couple of years or ... A: Tony, since revolver cartridges are not fed into the gun (just dropped into the chambers), there is ... | ||
| Pistol, rifle ammunition disposal | 3/25/2009 | Doug Little |
| Q: Gentlemen, We are settling my brothers estate. The local dealer accepted consignment of plus twenty ... A: Wayne, Your dealer most likely refused the ammo due to potential liability issues. He has no idea ... | ||
| stevens 5100 sxs | 3/25/2009 | Bob H. |
| Q: How do I get the forend off? A: Here is a link to a parts diagram of your gun: ... | ||
| Noble G20, 22 Rifle Bolt | 3/24/2009 | Doug Little |
| Q: Do you know where I can get a bolt for my 22 cal rifle made by Noble Mfg of Mass? It is a single ... A: Robert, Numrich Gun Parts is your best bet. If you check the link below, you'll see what you are ... | ||
| Ammunition | 3/23/2009 | Rick Gore |
| Q: I have recently purchased a Ruger KGP141 revolver. I plan on using it for target shooting (not ... A: I think bigger and heavy is better, so I would go with a good heavy .357 round, it is faster and I ... | ||
| new shooter | 3/23/2009 | Doug Little |
| Q: iwas wondering what a good beginner gun for skeet shooting im willing to spend several hundred i ... A: Sean, I could write you a long answer, but what I would tell you is pretty much summed up in an ... | ||
| what is the value..... | 3/23/2009 | Bob H. |
| Q: I have a crackshot 22cal longrifle singalshot made by J Stevens Arms and Tool co. it has a number ... A: You can view, download, or print the blue book data for this firearm online at the following site: ... | ||
| gun worth | 3/22/2009 | Bob H. |
| Q: we have a richard 12 gauge double barrel shot gun with 2 hammers. would like to know value. working ... A: I wasn't able to find the "A. Richard" shotguns in any blue book lists but I did find several online ... | ||
| breakdown | 3/22/2009 | Rick Gore |
| Q: i have a .357 smith and Wesson revolver model 19-5 i wanted to give it a deeper cleaning, i cant ... A: Most s&w revolvers are a lot alike, I attached a link with a manual for a smith revolver. Normally ... | ||
| age of this rifle | 3/21/2009 | Rick Gore |
| Q: I have an old Winchester model 9432ws that my father gave me and I wanted to know the age. I have ... A: I think you have a lever action model 94 in 32 Caliber. I have attached some links that might help, ... | ||
| remington arms company, 12 guage | 3/21/2009 | Bob H. |
| Q: Looking for any information you can give me on this gun. I believe it to be a model 11, A-5 ... A: Your question doesn't specify what information you are looking for. I assume you are interested in ... | ||
| Ruger GP100 Identification | 3/21/2009 | Doug Little |
| Q: I have a Ruger GP100 Mod 172-79272. Is this an unusual gun? I can't find one like it pictured ... A: Tommy, Is is not especially 'unusual', but you don't see to many of them out there. Your GP-100 ... | ||
| shotgun | 3/20/2009 | Rick Gore |
| Q: I have a Universal arms 12 gauge over & under serial no. 18796. It has Universal firearms corp. ... A: Here are some links: http://www.m1carbinesinc.com/carbine_universal3.html ... | ||
| rifling | 3/20/2009 | Doug Little |
| Q: Were the .36 & .50 caliber guns of the mountain men rifled.? Were the HENRY guns used in the civil ... A: Paul, You are generally referring to what was called a "Plains Rifle" that was extremely popular in ... | ||
| savage model 99"a" | 3/20/2009 | Bob H. |
| Q: My gun is serial # A7XX331, a model stamped Savage 99A. I understand from talking with others that ... A: The following blue book report lists all of the Savage models with photos and descriptions of the ... | ||
| Browning Citori | 3/19/2009 | Paul Edward Zukowski |
| Q: I have the original box and a hard case and book. Model: SKEET Gauge:12 Barrels: 28" Chambers: 2 ... A: PV indicates it was made in 1985. http://www.browning.com/customerservice/dategun/detail.asp?id=32 I ... | ||
| shot gun | 3/19/2009 | Bob H. |
| Q: my dad gave me a shot gun it is a 20 gauge ward western field the number i found is o4m215a i was ... A: If your gun is a Western Field Model 215A then it was made by Mossberg as their model 85 according ... | ||
| what kind of rifle do i have | 3/19/2009 | Paul Edward Zukowski |
| Q: i have a rifle that i cant identify. it resembles a russian masin nagant but im not sure. it is a ... A: I can't I D it from that. You might be able to match it up here. It could be a any one of a number a ... | ||
| Handgun laws for oklahoma. | 3/18/2009 | Bob H. |
| Q: I have been searching for an answer for a while now. I recently received a handgun as a gift. I was ... A: Congratulations on the new handgun. What a nice gift! The following link provides an excellent ... | ||
| Jennings 22 handgun | 3/17/2009 | Rick Gore |
| Q: I bought one @ an auction over the weekend. Went in to pick it up @ the gun shop. I paid way too ... A: Well not sure what you paid or what condition it is in, if a gun store gave it to you then they ... | ||
| .22 Pistol by Hammerli | 3/17/2009 | Rick Gore |
| Q: I am in possession of a .22 LR pistol with the marking of Hammerli on the slide, though it looks ... A: http://www.google.com/search?hl=en&q=22+Pistol+Hammerli&btnG=Google+Search&aq=f&oq= Cut and paste ... | ||
| Comparison of 2nd & 3rd edition Glock 23 | 3/17/2009 | Rick Gore |
| Q: I am considering purchase of a NIB 2nd generation model 23 that can be purchased from its original ... A: Hey John, not sure of all the differences between 2nd and 3rd, but the major one is the rails that ... | ||
| 1892 winchester | 3/17/2009 | Charles Gage |
| Q: I have a mod. 1892 Winchester ser.# 53581, I think the barrel is not original, the caliber is not on ... A: As far as I know there isn't a number or letter that would show the caliber. However, you have a ... | ||
| N R Davis & Sons shotgun | 3/15/2009 | Paul Edward Zukowski |
| Q: My dad left me his shotgun which was made by N R Davis & Sons 12ga. double barrel 30" lenght, ... A: NR Davis made percussion then cartridge shotgun from 1853 to 1917 when merged with Warner to form ... | ||
| Gun Info | 3/15/2009 | Charles Gage |
| Q: I have a bolt action 7MM with Fabrica De Armas stamped on it. I am trying to find info on it. A: Your rifle is a Spanish(Mexican) Mauser Model 93 or 95. These were chambered to fit the 7mmx57 ... | ||
| daisy model 21 BB gun | 3/15/2009 | Doug Little |
| Q: how do I load a daisy model #21 double-barreled BB gun? A: Charles, This one is way outside of my area of expertise. I confess to knowing very little about ... | ||
| Essex dble Barreled shotgun | 3/15/2009 | Charles Gage |
| Q: First I am not wanting value, all I want is who made it and if I can still get parts for it?I know I ... A: The Essex shotgun was manufactured around 1929 by Crescent-Davis Firearms Company for the Belknap ... | ||
| 1891 rifle also sent pictures | 3/14/2009 | Charles Gage |
| Q: Identifying this rifle is driving me nuts, can you make one more attempt. It clearly says "New York ... A: I have not been able to find this rifle manufactured by H&D Folsom/Crescent. I did, however, find ... | ||
| shotgun | 3/14/2009 | Bob H. |
| Q: Was wondering who manufactured a Wards Westernfield 16ga. ddbl mod. 311A A: The blue book lists a Western Field model 31A which was made by Mossberg as their model 44 or model ... | ||
| Remington No. 4 Boys Rifle .25 rimfire | 3/14/2009 | Charles Gage |
| Q: The rifle mentioned has octagon barrel. Lever takedown. Belonged to my Gr Grandfather when he was a ... A: The Remington No.4 Boys Rifle was manufactured between 1890 and 1933. Your model was manufactured ... | ||
| mossberg 25s? | 3/13/2009 | Bob H. |
| Q: I recently went through some old family firearms and came across a mossberg model 25s 22 single shot ... A: I checked several blue books and a few online sources but couldn't find any record of a model 25s, I ... | ||
| 16g Springfield | 3/12/2009 | Paul Edward Zukowski |
| Q: Please help Have a 16 springield shotgun says newport model CN has the numbers t28557 t88557 and ... A: J Stevens (as part of Savage Arms after 1920) used the Trade Name on it Springfield economy models. ... | ||
| change in OK CCW Law | 3/12/2009 | Doug Little |
| Q: Doug, a while back you encouraged me to try and change the Oklahoma law for CCW permits. I had ... A: Robert, This is great news! But the really great news is that you became 'part of the solution'. ... | ||
| remington 11 | 3/12/2009 | Charles Gage |
| Q: Charles, on the bottom front right of the receiver for the Remington 11 (also browning auto 5) is ... A: I am not much of a gunsmith, but here are some sites you might try for a schematic: Ahlman's ... | ||
| .22 lr hawes montana marshall | 3/11/2009 | Charles Gage |
| Q: I need the head for my ejector rod and dont know where to look ANSWER: Hello Charlie. I found the ... A: Most revolver cylinders need to be 'timed' for each individual handgun. Some, however, can drop ... | ||
Page: Previous | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | Next All
Answers by Expert:
Top Expert on this page
I have been involved with firearms since 1976. I am currently an NRA Life Member and Certified Instructor for Pistol, Reloading, and Range Safety Officer. I am licensed to carry a concealed firearm in over 30 states. I can answer most questions on a wide variety of firearms topics including:
Experience:
I have been involved with firearms since 1976 including many forms of target practice, hunting, self defense, home defense, concealed carry, reloading, and dozens of training classes. I am currently an NRA Life Member and Certified Instructor for Pistol, Reloading, and Range Safety Officer. I am licensed to carry a concealed firearm in over 30 states. I am not a macho paramilitary guy that is going to bark orders at you like a drill sergeant or tell you that there is only one correct answer. Instead I am a down-to-earth working class guy that will patiently educate you on the facts and issues so that you can make your own decisions based on your situation.
My full time job keeps me quite busy however I also provide firearms training to friends and referrals in my spare time. Many people have helped me over the years so I volunteer my time whenever possible to give something back to the community. If you use this site and find it helpful then I encourage you to consider signing up as an expert as well.

©2012 About.com, a part of The New York Times Company. All rights reserved.