More Honda Answers
Question Library
Ask a question about Honda
Volunteer
Experts of the Month
Expert Login
Awards
About Us
Tell friends
Link to Us
Disclaimer
|
| |
|
|
| |
| | | |
About Gary J. Meyer II
Expertise
The types of questions I can answer would be related to Honda automobile diagnosis and repair procedures. I can't diagnose every car via email because some tests just require a good old fashion road test.
Experience
I am a Honda automobile technician with twenty years of new car dealership experience. My first few years as a Honda tech date back to when Honda cars were still offered in carburated models. In the last few years, I've been exposed to the integration of hybrid powered cars, the Natural Gas powered GX Civic, and electronic features ranging from voice activated GPS navigation to power sliding doors. I have been certified as an ASE Master Technician and passed the L1 Advanced Engine Performance test in 2000. I opened my own independent import repair shop specializing in but not limited to Honda automobiles in 2008. Operating my own shop has re-energized my enthusiasm for automobiles.
Publications
a few articles www.articlesbase.com, advertisement in East Coast Ink Magazine Spring 2009 and Fall 2009
Education/Credentials
ASE Certification, attending American Honda's training center and web based training American Honda provided, New car dealership management training
Awards and Honors
3 time Honda Top Tech finalist, achieved Honda Bronze, Silver, Gold, and Platinum Level Training status,achieved a training level of 99 percent of all current American Honda Traning center Modules and self study proformance modules in 1999, Re-certified ASE Master technician, L1 Advanced engine performance ASE certification
| | |
| |
You are here: Experts > Shopping > Cars > Honda > replace my starter
Honda - replace my starter
Expert: Gary J. Meyer II - 10/24/2009
Question
I need to replace the starter on my 92 honda lx. How many screws do I need to remove? Where are they? What tool will need to do the job
Answer
Fairly simple procedure..
There are two bolts that hold the starter to the transmission case. The heads of the bolts require a 14mm socket and I use a flex head 3/8 inch ratchet with a small extension. The hot lead for the starter is a 12mm nut and I use an offset box end wrench. The signal wire for the starter is a simple electrical female lead.
Add to this Answer Ask a Question
|
|
