Locksmithing/Questions Answered by Expert Terry V. Andreasen (Andy)

SubjectDate Asked
Johnson Pacific Safe Co.2/10/2012
  Q: I see a question from someone about a year ago about servicing safes. I had no idea that they ...
  A: Mandy, Well that phone number will give you an idea how old your safe is. Notice the old exchange ...
Question about a safe2/9/2012
  Q: After both my parents passed away, they left a Yale&Towne Mfg Co. safe in the house. Its black and ...
  A: Carla, Sorry, but Yale & Towne was a "LOCK" manufacturer only, NOT a safe manufacturer. Many safe ...
Challenger Emergency Manual Key2/8/2012
  Q: I've got a Challenger DTC series. The batteries died. I've misplaced my "key" is there a picture of ...
  A: Jim, first off, I doubt that Challenger made one key to fit all of their safes, so I'm not sure why ...
victor safe2/8/2012
  Q: how to open with out the combination
  A: Chris, If the safe could be opened without using the combination, it wouldn't be very safe. If you ...
Safe Question2/8/2012
  Q: You recently posted a question to Patrick D. Harrington in category Locksmithing: I run Rays Lock ...
  A: Ray, First off, I never issue opening instructions for obvious security and liability reasons. As ...
Eagle Safe2/7/2012
  Q: We have three year old eagle safe with electronic and key lock. It has sticker on it "pressure ...
  A: Anirudh, Unfortunately safes like this have really inexpensive electronics (read cheap!). They are ...
Vanguard 2.0 Safe2/7/2012
  Q: I have almost the same question as the one I read on line. We have a Vanguard 2.0. We don't have ...
  A: Mike, These safes were Labeled for and sold by Sears years ago. Many of the "VanGuard" series of ...
LORI LC1272 Lock2/6/2012
  Q: I have a small safe with a LORI LC1272 lock on it. I am in need of the combination for the lock. I ...
  A: Doug, Lori hasn't made combination locks for over 20 years. There locks were all sent out to safe ...
Allied-Gary Safe Model ASPL2/4/2012
  Q: Can I get keys for this safe with the serial number? I have no keys for it and the safe is in the RV ...
  A: Wayne, Sorry but serial numbers ONLY work for manufacturers. As Allied-Gary is no longer in ...
Key Lock safe ID,(mfg, age, $),2/4/2012
  Q: I have pictures (5)of inside, top, lock close-up and side. Are you able to identify this safe by ...
  A: Bob, I would be happy to look at your safe for you. In order to answer questions, identify, ...
SAFE COMBINATION2/4/2012
  Q: My mother is in the Nursing Home with Alzheimers; we have her safe which is open and unlocked. She ...
  A: Gloria, If the safe is "OPEN", and you are able to access the back of the door, or take the door ...
Marvins Safe2/4/2012
  Q: I run Rays Lock Service in Elmira NY. I am trying to Identify and open a Marvin's Safe. It looks ...
  A: I'm assuming that this is just a duplicate question as I've answered it once, but just in case, here ...
Old halls safe with sargent and greenleaf2/4/2012
  Q: I have an old halls safe that I need opened. First off, I have no idea what the combination is. I ...
  A: Josh, The locksmith is correct in that the dial has been replaced, which could also mean that the ...
SAFE COMBINATION2/3/2012
  Q: My mother is in the Nursing Home with Alzheimers; we have her safe which is open and unlocked. She ...
  A: Gloria, Manufacturers NEVER publish records of combinations for obvious security and liability ...
Mosler Safe2/3/2012
  Q: I would like information and the value on my Mosler safe. The information inside the door on the ...
  A: Susan, The plates are basically the "standards" that the safe was built to. In this case you have ...
Old Cannonball Safe2/2/2012
  Q: I have this cannonball safe in the back room of my family run business. It appears to have been ...
  A: James, Your safe was built by the York Safe & Lock Company, it was an "Ely-Norris patented Manard ...
victor safe2/2/2012
  Q: I have a victor safe from my great grandfathers general store. My father and I are planning to get ...
  A: Grant, While it may have been listed in a catalog at some point, identified by a model number, very ...
Safe Pilifer2/2/2012
  Q: Last month I bought some 9 of Polifer. All of them I can open except of one. This is the Type ...
  A: Mirek, Sorry, but this is not a safe that I'm familiar with. It is probably European and not ...
old combo lock2/1/2012
  Q: I have an old slaymaker combo lock and cannot remember the combination.Is there a way to get the ...
  A: Donald, If you have a local locksmith shop with the codes, and if your padlock has a serial number, ...
security box lock1/31/2012
  Q: I'm building a removable security box to hold firearms for traveling and shows. I would like to ...
  A: Lex, This would be called fabrication. Manufacturers don't manufacture "bolt work" to sell as a ...
Can Diebold file cabinet be rekeyed?1/31/2012
  Q: I'm really curious about how this turned out! I am considering purchasing a Diebold file cabinet at ...
  A: Julie, First off, I NEVER compare one safe (or cabinet) to another. In this industry I've found ...
Can't get in safe1/31/2012
  Q: My friend was given a HerringHall Marvin Safe. It was given to him by an elderly lady he did work ...
  A: Mary, HHM went out of business after it was acquired by Diebold in 1959, and they closed the ...
Bank Vault1/30/2012
  Q: My business partner and I just recently bought an old bank building. it has been empty about 8-9 ...
  A: Kevin, Vault doors ONLY have value when they are actually installed and operational. If you are ...
Sears Tower Safe1/29/2012
  Q: I have a Sears Tower Safe that i would like to mount to the floor. I was going to drill some ...
  A: Tim, In that case, I understand and think this would be ok, for a small amount of ammunition. If ...
Sears Tower Safe1/29/2012
  Q: I have a Sears Tower Safe that i would like to mount to the floor. I was going to drill some ...
  A: Tim, There is no asbestos in this container. If you are concerned have the insulation tested by a ...
info about a safe1/29/2012
  Q: I was wondering if you would be able to give me any type of information about this safe that I have ...
  A: Jeff, I have information that the "Dominion Safe & Vault Co." was operated in Farnham Quebec, by ...
Safe1/29/2012
  Q: Andreasen. I would like to know a little about a small safe that I was givin by a friend in hopes ...
  A: John, The "Clark" Security Products is basically a locksmith supply company, which started in San ...
gardex safe1/27/2012
  Q: my father (86) has a gardex safe, serial B733574, and he can no longer remember how to open it. His ...
  A: Mary, Unfortunately, in many cases combinations are passed on the way they are remembered or ...
information on my safe1/27/2012
  Q: This safe was in my house when I bought it a few years ago. I'm looking for a year and model, and ...
  A: Don, The information that you have provided were on the Safe Manufacturers National Association ...
Found safe, reset code.1/27/2012
  Q: Hope your going well Terry, and thank you for your time and the help that is on its way! So, i found ...
  A: Simon, The safe is NOT an "R6700", made by S&G. S&G is a lock manufacturer ONLY. As long as the ...
Locked victor safe1/27/2012
  Q: I have an old Victor safe and cannot remember the combo. It is shut now. I would like to know how ...
  A: Waylon, Well, first off, your safe was NOT awarded the "Grand Price" at the 1904 Louisiana Purchase ...
install new mechanical dial locks on winchester safe1/26/2012
  Q: Is there directions/instructions available for installing new mechanical locks on winchester gun ...
  A: Bruce, If your safe is one of the "imports", then it will not have any mounting holes or mounting ...
Can't get my safe open ,I have the right combination .1/25/2012
  Q: Can you tell me how to use my combination to my safe,it has been awhile since i have opened it and i ...
  A: Gene, The lock on your Gary Safe should be a Sargent & Greenleaf (S&G) lock. The dialing sequence ...
Grasshopper safe1/25/2012
  Q: I have a grasshopper safe it is locked and would like to know about opening and getting key made I'm ...
  A: Ed, Unfortunately you have a safe that will require a safe technician who is very familiar with ...
How open old Mosler safe1/24/2012
  Q: Mr. Andreasen: I have an old Mosler combo dial safe about 3 x 4 x 5'. It used to be in the old ...
  A: John, Unfortunately, mechanical problems with safes require "HANDS ON" solutions - ESPECIALLY when ...
old safe1/24/2012
  Q: I have a old victorsafe ( serial# 807 ) with yael cobination lock. can i find the combination.
  A: Joe, If your "Victor" safe has a Yale lock, it isn't as old as you think. While Victor Safe & Lock ...
safe's built in 1920's1/23/2012
  Q: I am a writer working on a story and wanting a name of a home safe, not too large, but one that ...
  A: Kerry, You want the name of a manufacturer, or the name of a safe owner? If you want the name of ...
MONTGOMERY WARD 9007 SAFE1/22/2012
  Q: I have a Mont. Ward 9007 safe I purchased 2nd hand. Can the combination be changed on these safes? ...
  A: John, The short answer is yes. The long answer is - how, depends on the safe manufacturer and the ...
safe - missing master key1/21/2012
  Q: I have a safe at home that came with 2 standard keys to be used with a combination that can be set ...
  A: Suzette, The current contact information for Sisco Products is: Honeywell/Sisco 2835 East Ana ...
Old Cary Vault with no lock1/21/2012
  Q: I'm about to be renting an office space that has an old Cary vault installed from years ago when ...
  A: Ben, The Cary Safe Company was in business from 1878 until 1929 in Buffalo, NY. While this company ...
How to use a Mosler safe dial combination1/20/2012
  Q: I purchased a Mosler safe. It is currently locked but open. I have personally seen the combination ...
  A: Igor, The dialing sequence should be: 4 times right to the first number (68) 3 times left to the ...
Adesco floor safe not closing1/19/2012
  Q: I am with a church that has an older model Adesco floor safe that will not close. The handle will ...
  A: Brad, If the door is open and the bolts are retracted, then the lock CANNOT operate, until the ...
Mosler bank vault door, possibly E'Lan1/19/2012
  Q: Andy, I have acquired a bank vault door/with frame, complete, that has Mosler tags on it, but looks ...
  A: Bill, Sorry, but for obvious liability reasons I can't give you any directions for assemblying the ...
safe combo1/19/2012
  Q: I got my safe from a friend that I helped move . he got it from his place of employment ...
  A: Jon, AMSEC will not deal directly with you. If you have a local safe company that you do business ...
Adesco floor safe not closing1/18/2012
  Q: I am with a church that has an older model Adesco floor safe that will not close. The handle will ...
  A: Brad, Unfortunately Adesco Safe (as an individual company) no longer exists. It was acquired by ...
remington rand sage1/18/2012
  Q: I got a Remington Rand safe from a GSA warehouse It is where they store stuff for the government. ...
  A: Jayme, I don't know what the "6/00" would represent unless this was a date that the combination was ...
Time delay safe.1/18/2012
  Q: I have a safe With three doors on it. The problem that I am having. Is that when I change the ...
  A: Keith, The original factory master code for this lock is 16161616. Press the lower left key "A", ...
Bank Vault Door1/17/2012
  Q: I'm looking to buy a Old Bank Vault Door. Looking for big, old and fancy but I don't have a very big ...
  A: Rick, I would recommend that you contact World Wide Safe & Vault in Miami as they are going to be ...
Herring Hall Marvin safe1/16/2012
  Q: A few months ago i bought a antique safe mainly for decoration in a old RR depot i'm restoring.I ...
  A: Fritz, Well, that was quite a story, about all I can say is "WOW"! Anyway, I NEVER recommend using ...
old mosler safe1/16/2012
  Q: I found a old mosler safe in the basement of a house I was cleaning out. I have no idea of the date ...
  A: I believe that I answered this question last week, but in case you didn't receive it, here is the ...
combination sequence1/16/2012
  Q: Recently we dug out our old safe. We have the.combination.. but it has been manyyears since we have ...
  A: The information is NOT dependent upon the safe manufacturer, but by the LOCK manufacturer. I'm ...
old mosler safe1/16/2012
  Q: I found a old mosler safe in the basement of a house I was cleaning out. I have no idea of the date ...
  A: Tim, As far as how old it is or what you have, I can probably answer those questions, but I will ...
Old Remington Rand File Safe1/12/2012
  Q: I have an old Remington Rand two-drawer file safe I got from a USAF excess proerty center many years ...
  A: John, If you got your safe from the USAF, then I can guarantee you that they had changed it from ...
floor safe1/12/2012
  Q: I am just trying to find some information on a company I believe is either H.H.Williams or H.J. ...
  A: Tony, I have no information on any safe manufacturer by this name. I'm not familiar with very many ...
Old safe/Yale lock1/12/2012
  Q: Terry, I have an old safe, works perfect. I can not find a maker on it. The only marking is the Yale ...
  A: Ken, NOPE! Yale was a lock manufacturer only. A lot of safe companies used their locks. I can't ...
Stuck Door on My Gun Safe1/12/2012
  Q: Andy - I just recently purchased a treadlock legacy 2000 gun safe from a friend. It has a mechanical ...
  A: Brian, I would have to guess that you have one of two problems - First, as it was working prior to ...
macneale and urban safe1/10/2012
  Q: I have an old macneale and urban safe in the basement of a building I bought years ago and am in the ...
  A: Rahn, This would be similar to your asking for instructions to do self open heart surgery to keep ...
Ahern Safe Co., Ltd., Montreal1/10/2012
  Q: I restored an old Ahern safe I found at an auction house. I want to know more about the company, ...
  A: John, I've seen a number of safes which were sold by this company and relabeled with their name for ...
Halls Safe co , New York1/9/2012
  Q: I have a Halls Safe New Your 1906. Been in the family for years. Lost the original combination but ...
  A: Niel, First off, there aren't any "tumblers" in a combination lock, there are wheels, and what you ...
Beat up safe1/9/2012
  Q: I have a client with a Gary Safe (H 29”, W 18”, D 18” & Serial Number 46425C 1286). They lost the ...
  A: Paul, What is that saying about "assuming"? First off, I NEVER recommend using a locksmith to work ...
Remington Rand fireproof filing cabinet1/9/2012
  Q: I was given a four drawer Remington Rand fireproof filing cabinet. There is no lock in the hole in ...
  A: Randy, This company hasn't been in business (making safes) since 1955. I believe that they ...
key blanks1/9/2012
  Q: We have a Victor firemaster LX single drawer safe. We only have one key and noone seems to know ...
  A: Dennis, I would have to see the key that you are currently using to accurately answer the question. ...
victor safe1/8/2012
  Q: I own a roughly 3.5 foot tall victor safe with a 100 number dial and a handle. Its always worked ...
  A: Andrew, I'm not sure what "configuration" you are refering to. If you are looking for a ...
Old Sear safe1/7/2012
  Q: I have an old sears safe with a Federal Equipment Co combination lock. The pins are worn and slip ...
  A: John, Sorry but I have to repeat my disclaimer: NOTE: I never recommend DIY projects for safe ...
vault door lubrication1/7/2012
  Q: Andy are you familiar with the Diebold vault doors from the early 1900's? I have a question ...
  A: Jeff, What is your question? If you have a photo of the hinge in question it may help, also. If ...
Old Sear safe1/6/2012
  Q: I have an old sears safe with a Federal Equipment Co combination lock. The pins are worn and slip ...
  A: John, The Federal Equipment combination locks were basically "inexpensive" knock offs of the S&G ...
Old Yale Safe1/6/2012
  Q: My names Greg. I saw a post on the internet where you were giving some advice on old Yale Locks. I ...
  A: Greg, First off, I never recommend combination changes as DIY projects for the same reason that I ...
opening an old diebold safe1/6/2012
  Q: I have a old diebold safe that my wifes grandfather left to us in his passing. It is about ...
  A: Austin, Instead of the "Right to open" that you originally listed, I have substituted the "1 time ...
Time delay safe.1/6/2012
  Q: I have a safe With three doors on it. The problem that I am having. Is that when I change the ...
  A: Keith, I will need to see a better photo of the safe to see what you actually have. This photo is ...
L.A. DELLINGER SAFE1/6/2012
  Q: I AM LOOKING FOR THE BEST WAY TO CHANGE THE COMBINATION FOR AN OLD SAFE THAT HAS L.A. DELLINGER AS ...
  A: Eric, Unfortunately, there were and are a number of manufacturers that basically make safes with ...
opening an old diebold safe1/6/2012
  Q: I have a old diebold safe that my wifes grandfather left to us in his passing. It is about ...
  A: Austin, Generally, instructions are passed on the way they are understood, NOT the way that they ...
Hall's Safe & Lock Company1/5/2012
  Q: We recently acquired a Hall's Safe & Lock Company safe. On the handle the following number is ...
  A: Heidi, While most real locksmiths SHOULD be able to hand fit a key to this lock, the reality is ...
york antique safe yale lock1/5/2012
  Q: I am looking for someone that can recondition the Yale cypher, local locksmith says it is worn and ...
  A: Blaine, First off I NEVER recommend using locksmiths for safe work. In general most locksmiths ...
Changing a safes combination1/5/2012
  Q: I have a Hall's Safe Co. "Hall's Patent April 3rd 1906" safe that I inherited. I have the ...
  A: Victor, Probably not. The internet is ONLY as good as the material that is put into it. As many ...
Open Coles office cabinet safe,1/5/2012
  Q: I have a Coles office cabinet safe that is locked open. We have lost the combination to it. On the ...
  A: Ike, while the "goal" is to line the wheels up to allow the lock to unlock, the trick is dialing it ...
diebold safe1/4/2012
  Q: Sir, We have a safe at our office that has a smaller inner safe with a round door that has not been ...
  A: Sam, I will need to see a photo of the safe (interior chest) so that I can ID it and its lock and ...
Open diebold safe1/3/2012
  Q: I am trying to get a diebold safe open for an estate settlement. My husband had wrote the comination ...
  A: Lisa, Diebold used a number of different types of locks on their safes, over the years, so you are ...
Old Cylindrical Wall Safe but No Combination1/2/2012
  Q: I bought my house years ago through a bank sale. The previous owners had no children, thus the ...
  A: John, Sorry for taking so long to get back to you, but I've been doing some research on this one. ...
GSA 2 draw security cabinet1/2/2012
  Q: Mosler Security Container 325 lb #: 1231947 Tag - Black I purchased two units - have combo for one ...
  A: Steve, I understand that it is expensive to have work done on GSA containers, but you have to blame ...
Is there a defaul safe combination?1/1/2012
  Q: We both usually operate just with key, unfortunately she threw her ugg boot and the dial shifted. ...
  A: Nanette, All Lord safes came set on a single combination, which would be changed once the safe was ...
Victor Safe12/31/2011
  Q: I am trying to open this Victor safe..... the 3 digit combination was written down but has faded ...
  A: Rick, Yes the dialing sequence is: 4 times left to the first number, 3 times right to the second ...
Tilton&McFarland12/31/2011
  Q: My father-in recently died leaving my wife and I an old Tilton&McFarland safe buried in the ...
  A: Ed, Yes, and No, While the lock can be picked, your chances of finding a locksmith with any ...
HHM Combination safe12/29/2011
  Q: Inherited an old safe. I have the combination, but have no idea how to make it work! The safe is an ...
  A: Beambemity, That's a great story about your Grandfather. We get the same thing. Generally most ...
Restoring a Schwab Safe12/29/2011
  Q: I recently acquired an old Schwab Safe that has a Van Dorn Steel Office Furniture tag riveted above ...
  A: Jeremiah, As this container isn't an antique you can pretty much do what every you want to it. ...
GSA 2 draw security cabinet12/29/2011
  Q: Mosler Security Container 325 lb #: 1231947 Tag - Black I purchased two units - have combo for one ...
  A: Steve, Sorry, but for obvious security and liability reasons I do not give out any opening ...
locked walk-in vault door with no combo12/29/2011
  Q: We have an old walk in vault with a steel door with a combination lock. When the door was closed, ...
  A: Daniel, Depending on WHO is available in your area, they may be able to manipulate the lock open ...
Mini Safe12/29/2011
  Q: I live in Johannesburg South Africa. I am looking for a mini safe (patent no 68/1544) "door" Mine ...
  A: Laura, Sorry, but the patent number doesn't help at all, and I'm not familiar with your reference ...
locked walk-in vault door with no combo12/29/2011
  Q: We have an old walk in vault with a steel door with a combination lock. When the door was closed, ...
  A: Daniel, The short answer is yes! The long answer is, you basically have two options, you can try ...
Hall's Safe and Lock mystery12/29/2011
  Q: We had a customer drop off a an old safe (approx 1860) to be opened and I worked on it this past ...
  A: Jason, The most important part of safe opening (rule 1) is correctly identifying the safe and more ...
Mosler safe12/28/2011
  Q: My father has a Mosler safe it isn't possible for him to send me a picture as of yet so I will be as ...
  A: Lucy, Safes over 50 years old do not meet current fire or burglary standards (with few exceptions). ...
Mosler Class C Filing cabinets12/28/2011
  Q: We have 2 of these that were previously used to keep business records...long ago the combinations to ...
  A: Syd, These were cool filing cabinets. When the doors are opened, they slide into the cabinet out ...
Meilink #54212/28/2011
  Q: Mr Andreason, It seems one heavy person pulled open our safe and POP! I saw the picture in the image ...
  A: Reuben, Meilink Safe Company was acquired by FireKing Group International in 1990. While they ...
opening an eagle safe12/26/2011
  Q: We have an old eagle safe my dad bought from a local business many years ago. He recently died and ...
  A: Jeff, I'll have to see your safe to figure out what you have. There was an "Eagle" lock ...
MOSLER SAFE12/25/2011
  Q: I BOUGHT A MOSLER SAFE WITHOUT A COMBINATION. I CAN NOT FIND A SERIAL NUMBER ON IT. HOW CAN I GET IT ...
  A: Bob, Here are several companies in your area that you can talk to: Fink Safe & Lock Co., Inc. ...
Mosler MR 302-402 Group 1R lock12/24/2011
  Q: I am trying to remove this lock from my safe so that I can have the safe powder coated. My question ...
  A: Don, The dial is held on by the drive wheel. Its spindle is screwed into the drive wheel and held ...
Adjusting door on Herring & Co. Safe12/24/2011
  Q: I have a Herring & Co. safe that we still use. It is a dual combination with a drop down handle and ...
  A: Ruth, There were no adjustments built into these safes, by the manufacturer. This means that ...
Special Key Service12/23/2011
  Q: You've helped me greatly in the past, so I think it's more than appropriate to bring this question ...
  A: John, I never recommend using locksmiths for safe work as they generally DO NOT have the training, ...
50s diebolt12/23/2011
  Q: .. I have what I think is a 1950s Diebolt wall safe, I have the combination numbers 4, but I don't ...
  A: Bryan, There are ONLY three reasons a safe lock will NOT open, they are (in order): 1. Incorrect ...
Value of safe12/22/2011
  Q: We have an old safe with a plate stating: The Safe Cabinet Co. S-Cientist "B" Marietta Ohio This ...
  A: Alice, This safe would have been made between 1924-1926. After the company was acquired by ...
MOSLER SAFE12/21/2011
  Q: I BOUGHT A MOSLER SAFE WITHOUT A COMBINATION. I CAN NOT FIND A SERIAL NUMBER ON IT. HOW CAN I GET IT ...
  A: Bob, Having a serial number doesn't really matter as the company went out of business in 2001. ...
opening the safe12/21/2011
  Q: Could you please assist me with opening my father's safe, SAGA SAF D POSIT, model 1100, 12 X 16. ...
  A: Valerie, The key acts like the handle to retract the bolt work AFTER the combination has been ...
1907 eagle lock12/20/2011
  Q: I bought a old JJ taylor safe from a estate sale and was told the combination was lost years ago. ...
  A: Tony, Manufacturers NEVER released combinations which were set on safes for obvious security and ...
HHHHHHEEEEEEELLPPPPP !12/20/2011
  Q: I bought a Stiffel & Freeman safe 1896 vintage I think. From a friend of mine when he was closing ...
  A: Bruce, First how did you get an 1896 age for your safe? As there are no serial number records ...
Meilink safe12/19/2011
  Q: I am looking at a Meilink safe. It says it is a Class A. The S/N 478742 and it is 54.5 inches Wide ...
  A: Ethan, As you have noted, large doesn't necessarily mean secure or better. It all depends on how ...
victor safe12/19/2011
  Q: i am just wondering what it worth? it needs painted & decales re done, but other than that it works ...
  A: Baxter Unfortunately my wife broke my crystal ball about the same time she killed the money tree, ...
Meilink safe12/18/2011
  Q: I am looking at a Meilink safe. It says it is a Class A. The S/N 478742 and it is 54.5 inches Wide ...
  A: Ethan, First off, I can see that I'm going to have to educate you on safes before YOU can make an ...
Opening a Diebold floor safe12/17/2011
  Q: We bought our house 2 years ago and found a floor safe in the garage. We've been very curious to ...
  A: Julie, Think of it, kind of like your car. If you took it to an untrained mechanic who caused ...
Opening a Diebold floor safe12/17/2011
  Q: We bought our house 2 years ago and found a floor safe in the garage. We've been very curious to ...
  A: This illustrates WHY I NEVER recommend using locksmiths for safe work. They generally don't have ...
replacement lock12/16/2011
  Q: I need to replace the lock on my small Meilink steel safe (16" x 12 1/2", 7" deep, outside ...
  A: Frank, Sorry, these locks haven't been made in a number of years. After the lock manufacturer quit ...
Taylor Safe12/16/2011
  Q: Andy, Have you had a chance to look at the pictures I sent of my lock? I am still wondering about ...
  A: Ron, Sorry but this has been a really busy week and I've been on the road almost constantly. ...
Replating Lock wheel/misc parts12/16/2011
  Q: Andy, I started my safe restoration project, after stripping the many layers of paint, I found the ...
  A: Jay, Mosler, Bowen & Company was a sales agent for Mosler in Mexico City, Mexico. George ...
Date of Safe12/15/2011
  Q: Is there a way to tell the manufacture date of my Tilton & McFarland safe. We were told it came out ...
  A: Mark, Congratulations on getting your safe opened. I had to open a Tilton & McFarland this ...
safe combination12/15/2011
  Q: I recently started working at a camp that has a Sears Tower safe with the door open in the open ...
  A: Chip, The "Tower" safes were provided to Sears by several different manufacturers. The combination ...
Lost Key to a file12/13/2011
  Q: I have an old filing cabinet by Cole. I do not have the key to work the lock and was wondering if a ...
  A: Paul, Sounds like the lock is a Chicago. Most locksmith shops should be able to make a key by code ...
Atlas Safe Combo - Deceased Family Member12/13/2011
  Q: Andy, my mother just passed away (suddenly) - she has an Atlas Safe (Los Angeles) with a combo lock ...
  A: Cher, First off, there is no such thing as "fire proof", it may be fire resistive but NOT proof. ...
LOST COMBO12/12/2011
  Q: I lost my combo on a BUMIL SAFE SD101. where do i start to try to open in?
  A: Raniero, My first recommendation would be to contact the company who bought the safe from. There ...
Taylor Safe12/12/2011
  Q: Regarding my old TAYLOR SAFE I know that you are getting me a price on a change key but while I ...
  A: Ron, I've been out of the office for the past several days, and it doesn't look like I'll be back ...
RE: Meilink Safe Question12/12/2011
  Q: I have an old Meilink safe; 75"H x 45"W x 36"D. The ID info is as follows: SPEFI-D Y-127674 SMNA ...
  A: Dave, The information that you have provided have nothing to do with the manufacturer or model of ...
Changing Combination12/12/2011
  Q: I have a chance to buy a used Star safe, (taken over by American Security in the 70's). My main ...
  A: Tim, These safes were made in China and Japan for Star. They are all imported and not made in the ...
Replacing a Yale OC5 safe lock12/12/2011
  Q: I picked up a old large military safe that has had it's lock disabled. The lock is a Yale OC5. I'm ...
  A: Toby, There will be a spline key which connects the drive wheel to the dial spindle, you need to ...
unlock a yale safe12/12/2011
  Q: I have a safe that I believe to be about 100 years old. It at the present time locked in the open ...
  A: Karl, The Acme Safe Company (New York), has been a distributor not a manufacturer, since around ...
Victor Fire Master File Cabinet drawer stuck open12/11/2011
  Q: I was given two older Victor Fire Master 4 drawer File Cabinets. They have a single lock each. Each ...
  A: Mary, Mechanical problems generally require hands on inspection and diagnostics. As I'm not there ...
gun safe combination lock seized12/11/2011
  Q: I have a Sargent Greenleaf Group 2 # 6-451717 seized from flood water. Need help. Also have second ...
  A: Stephen, If the wheels of the lock are seized, you cannot introduce a lubricant or penetrating ...
Opening a old company safe.12/10/2011
  Q: Andy, My company is downsizing and we found a old safe. (Atlas safe, Los Angeles) Can get the S/N ...
  A: Matthew, Recovering a lost combination from the factory wouild require that the factory still be in ...
Tower safe that is locked12/9/2011
  Q: Is it possible for me to open this safe? There is a number stamped on it "2D732" if that makes any ...
  A: Max, There are no "access" areas under the dial that allow you to open the safe. Tower safes were ...
bank vault at prison12/8/2011
  Q: I am a corrections officer at Wende Correctional fac. and I have a bank vault that is locked with no ...
  A: Courtney, Bank vault doors come from the factory set on a neutral number. The combination is set ...
Lowrie Wall Safe12/7/2011
  Q: My house, built between 1910 and 1920, has a round Lowrie wall safe. The prior owners did not use ...
  A: Andrew, The Lowrie Safe & Lock Company was in business during the early 1900's (through the early ...
lost key12/7/2011
  Q: who can i contact to replace the key. It is a combination and lock model 1190-006021 weights 160lbs ...
  A: Cynthia, The information you've provided does no good without having a manufacturer's name. Even ...
Schwab safe12/7/2011
  Q: I inherited this Schwab safe and would like to know how much it is worth? The front of the safe ...
  A: John, Your Schwab safe is probably from the 1930's. Adams Extract Co., was probably the original ...
The Protector safe - Can't open it.12/6/2011
  Q: In my previous question, I did not include that The Protector Safe is a Digital Electronic Safe. It ...
  A: Patricia, Ok, well that gives me a little more to go on. Generally the biggest problem with ...
The Protector Safe12/6/2011
  Q: I can't open it...I am putting in the correct numbers and letter but it does not work. It has worked ...
  A: Patricia, If the lock or safe is not working correctly then you probably need to have it checked ...
Taylor Safe12/6/2011
  Q: My name is Ron Thorpe and I live in Toronto Ontario Canada. I'm a retired ex Security Alarm ...
  A: Ron, Good thing the safe was open, that will save a bunch in opening & repair charges. I'll ...
Need Combination12/4/2011
  Q: I have 2 GSA class 6 - 2 draw Mosler Security Cabinets. I have the combo for one but not the other. ...
  A: Steve, All of the Mosler GSA containers came set on ONE combination it is 50-25-50. If the ...
Morris-Ireland Safe12/4/2011
  Q: I do not have a "safe" problem but I inherited a working Morris-Ireland Safe and was wondering if ...
  A: William, Well, I've got some good news and bad news - first the bad news, you don't have a ...
Victor Safe12/4/2011
  Q: A local scrap yard I believe has a Victor safe, no outside markings, approximate 18 by 18 by 18 ...
  A: Marvin, I'm not sure what you mean by "only 4 numbers on the dial". I'm assuming that you mean a ...
Victor Safe12/3/2011
  Q: Terry, I was hoping you might provide some information on the pedigree of the Victor safe (photo ...
  A: Sharon, Sorry but it's not my site, I'm just a volunteer on it. Unfortunately, this site isn't ...
file safe recombination12/2/2011
  Q: I need to change the combination to my York file safe. It is about a 1950s model.It is a ...
  A: Daryl, It probably has a Yale lock, most of these locks are hand change types. I don't recommend ...
Victor Safe12/2/2011
  Q: Terry, I was hoping you might provide some information on the pedigree of the Victor safe (photo ...
  A: Sharon, Nicholasville, KY is the "home" of the safecracker. Harry C. Miller moved the Sargent & ...
Victor Safe12/1/2011
  Q: Terry, I was hoping you might provide some information on the pedigree of the Victor safe (photo ...
  A: Sharon, I would be happy to look at your safe for you. In order to answer questions, identify, ...
Sisco Model 1060 Firesafe11/30/2011
  Q: I cannot find an accurate site to contact Sisco customer service. I have a Model 1060 with a 4 ...
  A: Cricket, Sisco's contact info is as follows: Honeywell / Sisco 2835 East Anna Street Compton, CA ...
Shaw Walker Combination sequence11/27/2011
  Q: I have a Shaw Walker fireproof file cabinet. I know the combination, but not the sequence...Thanks ...
  A: Denny, THe dialing sequence should be: 4 times left to the first number, 3 times right to the ...
Is It Worth Restoring?11/27/2011
  Q: Inside View @@@@@IMAGE:90482:Locksmithing-3110/2011/11/inside-view.jpg##### ANSWER: Stephen, See ...
  A: Stephen, In generaly you need to think about the $$$ value that you are going to be storing IN the ...
Victor 1910 safe11/27/2011
  Q: I'm curious about the value of this safe. It is 29 inches high, by 18 wide and 18 deep....cast ...
  A: Patty, I would be happy to look at your safe. In order to answer questions, identify, evaluate or ...
York Safe door, 191711/27/2011
  Q: My unit in a 1917 building in San Francisco used to contain the walk-in vault for the business ...
  A: Will, Just because the building may have been built in 1917 does not mean that the door is also ...
buying a safe11/27/2011
  Q: I am looking to buy a safe for my home. Cash and jewelry. I am looking at something about 4'x3'x2'. ...
  A: Al, I'm glad that you contacted me BEFORE you actually spent any money. I want you to be an ...
large old safe11/25/2011
  Q: Large old safe 41" W x 59" H x 29" D. Made by Art Metal Construction Company. Label inside door : ...
  A: Hope you had a great Thanksgiving Day. The Art Metal Construction Company, was a metal furniture ...
montgomery ward safe 900711/24/2011
  Q: I found this safe in my grandparents basement, while I was cleaning it out. I don't know the ...
  A: Jayme, Montgomery Wards was not a manufacturer, they simply bought from other manufacturers and had ...
Mosler Safe11/24/2011
  Q: I have a Mosler Safe in the basement of a house I just bought and am not sure what to do with it. It ...
  A: Timothy, First off, the dates are "patent dates" and do NOT refer to manufacturing dates. ...
Keypad11/24/2011
  Q: Good day Terry, Happy Thanksgiving to you. I have a Fichet-Bauche safe that has become quite ...
  A: Colin, My recommendation is NOT a new keypad, it would be a complete new lock. While the key pad ...
Is It Worth Restoring?11/24/2011
  Q: Inside View
  A: Stephen, See my previous answer. Note: I really didn't touch on the restoration question. this ...
Is This Worth Restoring?11/24/2011
  Q: I Recently Bought This Safe Off Craigs List For $350,It Had A Vintage Look, It's Huge And Is HEAVY ...
  A: Stephen, I'm not sure what a "vintage look" is, as the word vintage applies to the age of a wine, ...
Looking11/23/2011
  Q: Andy, I am looking for a smaller(end table size maybe) vintage floor safe in working order in the ...
  A: Michael, first off, as you are in "Wine" making country, you should know that the word "VINTAGE" ...
DS 13011/23/2011
  Q: Good afternoon sir. I have a question on one of my safes. I am stationed in Afghanistan and one of ...
  A: Robert, Sorry, I can't give you a POC, or phone number. I was attached to CFLCC between 2004-2006 ...
DS 13011/23/2011
  Q: Good afternoon sir. I have a question on one of my safes. I am stationed in Afghanistan and one of ...
  A: Robert, The DS-130 is a fire resistive ONLY safe made by Diplomat out of south Korea. The DS ...
victor patent safe11/23/2011
  Q: I was wondering what you found the selling price to be on that victor patent 1904 safe. Wow| Is that ...
  A: Mark, I'm not sure what you are referring to? If it was a previous safe, then any evaluation would ...
Safe info11/22/2011
  Q: Herring safe in the woods behind our house its been in the elements for idk how long and the only ...
  A: J.J. Well obviously I will need to see the safe to give you any kind of evaluation. Chances are if ...
William Adams & Co. Salamander Safe11/22/2011
  Q: I inherited the above named safe from my father and before him, my grandfather. I am intrigued by ...
  A: Maurice, Basic History: William Adams & Company, Boston, MA. (1850's to at least the mid 1860's) ...
S&G combination lock11/21/2011
  Q: I have a Frontier Gun Safe w/an S&G combination lock. The safe is probably 15 yrs old (just to give ...
  A: Bob, First question is: When was the last time that your safe AND the lock were serviced? Just ...
Diebold safe11/21/2011
  Q: A church down the street from me was cleaning out a store room and intended on throwing out a safe. ...
  A: Matt, Great, I'm glad that you are figuring out how the locks work, it is a great hobby. I'm not ...
Diebold safe11/20/2011
  Q: A church down the street from me was cleaning out a store room and intended on throwing out a safe. ...
  A: Matt, Ok, now that the laughter has subsided I'll try to answer your questions. Sorry but I was ...
Forgotten Combination11/20/2011
  Q: If you don't know how to answer this question but know another site or person in which to tell me ...
  A: Deja, I'm not sure what you are inferring or asking, but I will attempt to answer your question. ...
Victor firemaster lx11/20/2011
  Q: I recently inherited a Victor Firemaster lx 4 drawer firesafe. The moving guys just dumped it in a ...
  A: Laurel, Drawers are held into file cabinets in a variety of methods depending on the glides or ...
Antique York Safe. Trying to get the co11/16/2011
  Q: I have an older floor safe with an open door and no combination for it. It is a York safe. I have ...
  A: Adam, As long as the door is open the combination can be recovered. Chances are you have a yale ...
Help needed with how to use combo11/16/2011
  Q: I'm hoping you might be able to assist me with opening a safe that I've had for many years (it was a ...
  A: Ramona, Montgomery Wards sold safes which were manufactured by a number of different companies. ...
Vanguard 2.0 Fire Safe11/14/2011
  Q: I have a Vanguard 2.0 fire safe manufactured by Meilink Co. that I purchased from Sears many years ...
  A: William, the locks that were used on these inexpensive safes were also inexpensive, plastic locks. ...
Need help opening safe11/14/2011
  Q: I have the combination numbers to my safe, which I haven't open in a number of years. I attempted ...
  A: Josie, As Sentry makes several types of locks, I would recommend that you contact them for the ...
Protector Safe11/13/2011
  Q: I own a Protector safe (Sisco, Inc.) model #1188 which was purchased in the early 1980's and am ...
  A: Pamela, Currently Sisco safes are manufactured under the "Honeywell" logo. The current info that I ...
Shaw Walker fire proof cabinet11/11/2011
  Q: I have a Shaw Walker SMNA rated 1 hour fire proof cabinet. Spec F2ND catalog no 4225 with a Sargent ...
  A: Andrew, First, lets address the "fire proof" thing. If the container only has a "1 hour rating", ...
The Safe Cabinet Standard ME 1926411/10/2011
  Q: Good Morning..hope this finds you in good spirits for the holidays. When was the Safe Manufacured? ...
  A: Iris, The "Safe Cabinet Company" began business in February 1905, and then organized under the laws ...
old standard LE Type safe with rusty fence11/10/2011
  Q: I have an old standard LE type safe flooded during Hurricane Irene It opened when wet, but no longer ...
  A: Ivan, I doubt that it is a "rusty" fence, as the yale locks used brass parts. This doesn't mean ...
Antique Safe11/8/2011
  Q: My deceased husband was a 3rd generation tailor. I have his safe from his store and I am trying to ...
  A: Lynn, While I can understand that you may have trouble attaching a photo to this site, I will still ...
Mosler Safe11/8/2011
  Q: We have moved into a former (?) Jewelers building. We have found a large Mosler Safe with the number ...
  A: Jack, Serial numbers are provided so that the "MANUFACTURER" has a reference for how the safe was ...
Default Combination11/8/2011
  Q: I have a Vanguard 1.3CF safe that I have never opened. My kids played with the combination before I ...
  A: Apel, There is no such thing as a "defualt" combination. Safes with a mechanical lock come set on ...
Mosler11/7/2011
  Q: I obtained a Mosler safe and was given the combination but I still can't open it. It was open at the ...
  A: Joe, Mosler only had a couple of locks that dialed up RLRL instead of LRLR. The majority of ALL ...
door won't unlock due to an extra part on the inside?11/7/2011
  Q: I bought an old Sears floor safe with the door open but the lock/bolts in locked position. I ...
  A: Gary, The spring loaded item is called a "relocking device", the purpose would be to jam the bolt ...
mosler safe11/5/2011
  Q: I have an old mosler that id like to identify in hopes of replacing the lock mechanism as it is ...
  A: Adam, Serial numbers only help the Manufacturer to identify the safe and what components may have ...
Lost Combimination11/4/2011
  Q: I have lost the combination to a Safe - D- Posit personal safe that I purchased some years ago. The ...
  A: Percy, Saga safes were inported from China and Korea, these haven't been brought in for years and ...
ART Metal 4 Drawer11/4/2011
  Q: I have an Art Metal four drawer container in great shape that is missing one drawer glide. Do you ...
  A: John, Not unless you find another container that you can part out. We don't "salvage" parts like ...
Cary Safe11/3/2011
  Q: I have an old Cary Safe, previously used by the Military. I watched the guy operate the combination ...
  A: Paul, Generally when people pass on combinations, they do it the way that THEY understand it, NOT ...
MOSLER SAFE11/2/2011
  Q: Like I'm sure You get this question time and time again. My Mom passed away and she was quiet old ...
  A: Bobby, I will need to see the safe to answer your questions. The plate you are referring to is ...
Diebold safe11/2/2011
  Q: my safe has no identity plates on it. Only on the inside lock itself. It is the size of a small ref. ...
  A: Eric, Sorry, but I'm not going to be able to answer your questions until I see the safe. You will ...
1919 cannonball Mosler11/1/2011
  Q: The Museum in my home town has a Mosler safe ( cannonball ) around 1919. The door on the bottom is ...
  A: Alex, If they don't have the combination for the safe, then they will need a professional safe ...
Shaw Walker 350 / 4 dawer file cabinet safe w/ stuck bottom 2 drawers10/31/2011
  Q: I appreciate any help or tips you might have! I have a 4 drawer file cabinet type Shaw Walker Safe ...
  A: John, First let me say that "mechanical problems" generally require hands on diagnostics and ...
victor safe, marietta, ohio10/31/2011
  Q: I have an old victor safe that is marked marietta, ohio. I use the safe but would like to know how ...
  A: Jean, I would have to will have to see the shelves to try to help you. Look under the front edge ...
J Baum safe10/31/2011
  Q: I have a safe made by the "J Baum safe and lock company". I have the combination, but can not open ...
  A: John, There are only three reasons a safe lock won't open, in order they are: 1. Incorrect ...
Gary Safe w/o Combination10/31/2011
  Q: My church has a Gary safe that has been locked and the combination lost for several years. The ...
  A: Richard, As you have logically gone over all of your solutions, I'm not sure what you need me for ...
Combination Sequence10/31/2011
  Q: I own a Brinks Model#5056 home fire safe that utilizes a dial combination and key. I have the ...
  A: Tim, Brinks was just a "brand logo", and had nothing to do with the Brinks company. They were ...
Antique Mosler & Bahmann safe10/30/2011
  Q: Just recently purchased a Mosler & Bahmann safe. My buddy are calling it the mid-size burglar. ...
  A: Toby, First off, the question of its being a "mid size" burglary safe. Anything with wheels on it ...
Sentry model 133010/29/2011
  Q: How do i know if it is a four or three combation safe?
  A: Jeff, Do you have a combination for the safe? If you are trying to open it and don't have a ...
Van Riper MFG Co10/29/2011
  Q: I have an old safe manufactured by "Van Riper MFG Co., Paterson New Jersey." The lock is a Yale ...
  A: Robert, I will have to see the safe to see what you have. I have no references to a "Van Riper Mfg ...
hurcules floor safe s/n s 8013110/29/2011
  Q: I have a hurcules floor safe , there is a number on the dial (S 80131) there is no combination. ...
  A: Donna, Most of the "Hurcules" model safes were manufactured by Meilink Safe Company. Generally ...
Mosler10/28/2011
  Q: I obtained a Mosler safe and was given the combination but I still can't open it. It was open at the ...
  A: Joe, Unfortunately serial numbers are only helpful to the manufacturer to let them know what was ...
Steeimaster10/28/2011
  Q: I recently acquired a Steelmaster file cabinet which includes a small safe on one side. I did not ...
  A: Duane, There are no records that I'm aware of for these cabinets. Manufacturers never released ...
S&G Lock Issue and Liberty Safe Fabrication10/27/2011
  Q: I ran across your page and wanted to see if you could provide me with some insight involving my ...
  A: John, Thanks, but this isn't my web page, I'm simply a volunteer on this site. I checked out your ...
Mosler10/26/2011
  Q: I obtained a Mosler safe and was given the combination but I still can't open it. It was open at the ...
  A: Joe, When you locked the lock, you cleared the combination. After that you just need to dial the ...
remington rand file safe10/26/2011
  Q: the second drawer is open but in the locked position. is 4 times to the right (clockwise) mean more ...
  A: Mike, I never recommend DIY projects for cleaning and lubricating locks for the same reason that I ...
Hercules MeilinkBuilt, no combination10/26/2011
  Q: Andy, My dad died a couple of months ago and with him the combination to his strong box. Something ...
  A: Jeff, You have three choices, you can try contacting the manufacturer, but as they were acquired by ...
Diplomat safe key blank10/25/2011
  Q: I have someone with a Diplomat safe CS001 and they want a key blank to take to a locksmith. The ...
  A: Amy, Most of the Diplomat safes used the Security Corp locks. The Ilco key blank numbers are: SY1 ...
Polifer MC530 - have combination & key but can't open10/25/2011
  Q: The charity I work for has a Polifer MC530 safe which I can't open. I have the key and what I think ...
  A: Harriet, The dialing sequence should be: 4 times right to the first number (13), 3 times left to ...
Meilink G-3 Wall Safe?10/25/2011
  Q: I recently moved into a pre-war apartment building (1922), and I found a wall safe that had been ...
  A: Zachary, While Meilink did have a "G" series of wall safes, that I have codes for, these are ...
mosler safe10/24/2011
  Q: i have a mosler safe from 1960 it has been sitting outside in the weather a long time the is from a ...
  A: Ronnie, As Mosler has been out of business for over 10 years, parts are no longer available, unless ...
yale and towne combination lock on a safe10/24/2011
  Q: My elderly father has a safe that we believe to be well over 100 years old. The combination lock if ...
  A: Kent, The dialing procedure WILL vary depending on the lock, based on your description of the ...
Have key but can't open safe10/23/2011
  Q: Sadly my father died this week, and my mother has been trying to open the safe in order to access ...
  A: Sarah, The first mistake that you are making is assuming that it is the same as yours, and operates ...
Art Metal, Inc. File Cabinet10/22/2011
  Q: I have an Art Metal, Inc. 3 drawer file cabinet that I got second hand. My problem is that the lock ...
  A: Melissa, Take a look at the face of the lock cylinder, there may be a code number stamped into it. ...
Mosler class c safe10/22/2011
  Q: I have a Mosler class C (CF-4) file cabinet safe Number 1y 101967 I have no idea what it is worth ...
  A: Ellen, This particular style of Mosler container was so cool, When the door is opened, you can ...
J Baum safe10/22/2011
  Q: I have a safe made by the "J Baum safe and lock company". I have the combination, but can not open ...
  A: John, There are only three reasons a safe lock will not open, in order they are: 1. incorrect ...
circa 1905 vault door10/21/2011
  Q: Terry, First, thank you for sharing your expertise. I do not know how to attach photos but can ...
  A: Jim, I would be happy to look at your door. Vintage, applies to grapes and wine making, as in the ...
X-07 change key10/20/2011
  Q: This isn't a question but another answer to what I saw posted in February 2009: Hello, I would like ...
  A: Jay, I was in Kuwait from late 2004 until mid 2006. My Army job was a ships master running a 200 ...
Vanguard 2.0 How to unlock10/20/2011
  Q: I bought a Vanguard 2.0 safe late 70's or early 80's from K-Mart. I never locked it because I ...
  A: Jerry, Generally when a locksmith wants you to leave a safe with him, it is because he doesn't know ...
Art Metal Jamestown NY10/20/2011
  Q: I bought an OLD Art Metal all steel desk. My estimate is it is 1940's. I have refurbished almost ...
  A: Bill, Art Metal was basically a "metal furniture" company. The company started in business in 1888 ...
X-07 change key10/19/2011
  Q: This isn't a question but another answer to what I saw posted in February 2009: Hello, I would like ...
  A: Jay, actually I was in the middle east on an 18 month tour working out of CFLCC headquarters at ...
Won't open10/19/2011
  Q: model C5 serial 119298 1960's unit. Dial was stuck and would not turn. It took a lot of effort to ...
  A: Frank, The combination is backwards, it should be: 4 times LEFT to the first number, 3 times ...
X-07 change key10/19/2011
  Q: This isn't a question but another answer to what I saw posted in February 2009: Hello, I would like ...
  A: Jay, While use of the correct changing tool IS the preferred method, the paper clip will work as an ...
mosler safe10/19/2011
  Q: I have an older mosler safe serial#132551.It is a four number combination which I have. What I need ...
  A: michael, As you didn't provide me with the numbers that you have, I'm going to have to make certain ...
antique safe restoration10/18/2011
  Q: Terry, our city has an antique safe that is in need of restoration. It was made by the Diebold Safe ...
  A: Tami, Sorry but I don't know of anyone in the Wisconsin area that restores safes. Generally most ...
Federal Equipment Company safe lock10/18/2011
  Q: How do I re-set the combination to my 100 number dial safe?
  A: Pierce, You will need a combination changing tool and the instructions. First off though, you ...
Help identifying this York Safe10/18/2011
  Q: We moved to my in laws house and found this safe that have been around for more than 35 years now ...
  A: Roberto, The York Safe & Lock Company was in business from 1883 to 1959. During WWII, York was ...
old meilink safe10/16/2011
  Q: I bought an old Meilink safe at an auction. I have the combination which is 4 numbers. The model ...
  A: Maria, There are only three reasons that a safe lock won't open, in order they are: 1. Incorrect ...
old meilink safe10/16/2011
  Q: I bought an old Meilink safe at an auction. I have the combination which is 4 numbers. The model ...
  A: Maria, The combination does NOT have 4 numbers, the last number should be a reference, and is NOT ...
Safe10/15/2011
  Q: Terry, I have a very old small black safe about 2 feet tall on rollers and is about 1 foot wide and ...
  A: Randy, when you close the door, and lock it, you HAVE cleared the lock. I'm assuming that the safe ...
Victor Legal File Fire Safe10/15/2011
  Q: I have a 4 drawer Legal document size 20.25 wide x 30 deep x 53.75 high. I have the combo drawer ...
  A: Owen, generally mechanical problems required hands on diagnostics, which means that you may need to ...
safe wont open10/14/2011
  Q: Any help will be greatly appreciated - thank you , Ed
  A: Edward, The only time you can "clear" the lock is after you lock it up. You would turn the dial ...
can't open my safe- combo is correct10/13/2011
  Q: I have a "sun" safe, and put something in it tonight, and heard a strange clunk when I locked it. ...
  A: Pete, There are only three reasons for a safe or safe lock not to open, they are: 1. incorrect ...
J. J. Taylor Safe10/12/2011
  Q: I have a customer who has a safe close too or the same as the one in the photo above. The door is ...
  A: Jack, No dialing the four wheel lock is pretty straight forward, the dialing sequence will either ...
Diebold10/12/2011
  Q: I have an old Military safe, with a DIEBOLD lock. I had the combo read/set when I first acquired the ...
  A: David, This isn't a safe, it is a locking file cabinet, which the military used for document ...
steelage10/11/2011
  Q: Looking to find a key for a steelage 5 hi fire file. It has a lable with corry jamestown and corry ...
  A: Chris, Steelage safes were built in India. To my knowledge they are no longer in business. The ...
Hall's Safe sold by AMerican Steel Safe Co.10/10/2011
  Q: Andy, Thank you for keeping the antique safe history alive. I love these old safes! I just ...
  A: Dan, You are correct in your assumption about the "Hall's Safe Company", however they didn't start ...
Shaw-Walker Safe10/10/2011
  Q: I have a very old Shaw-Walker 4-drawer fire proof file safe. Details I found were as follows: ...
  A: Jackie, SMNA only inspected safes up through the early 1960's. Safes or containers over 50 years ...
Safe restoration10/8/2011
  Q: I have a Morris & Ireland safe that has been in my family for at least 60 years (three generations). ...
  A: Dave, Does the safe say "Morris & Ireland", or "Morris-Ireland"? I ask the question as there were ...
Antique Macey Cabinet Safe? Help identifying10/7/2011
  Q: I recently acquired a unique safe. I believe it is an Antique Macey Cabinet safe. It is pretty big ...
  A: Patrick, The Macey Company, was a distributor of office equipment, not a manufacturer. The safe is ...
opening my safe.10/7/2011
  Q: My mother purchased a safe that was previously owned by the post office about five years ago. We ...
  A: Angela, Most of the older Schwab Safes used Yale locks. The dialing sequence should be: 4 times ...
removal of lock nest10/6/2011
  Q: I recently obtained a safe that has water damaged caused by hurricane Katrina. The seller thought it ...
  A: Randy, Well at least the time line is about correct. Beard & Bros. were making safes from the mid ...
Herring-Hall-Marvin safe10/6/2011
  Q: We just purchased this safe, had the combination re-set, and are having keys made for the very ...
  A: Ed Gray, There is basically only one aftermarket key manufacture. Ilco has a huge catalog of the ...
I can't open my browning gun-safe :(10/4/2011
  Q: I have a Browning Sterling gunsafe that I've owned for a few years, and it seems the dials are off. ...
  A: Tom, There could be a number of reasons that it doesn't operate, so we will go through some obvious ...
montgomery ward safe10/4/2011
  Q: I have recently aquired a montgomery ward safe 9041. I believe it was made around 1981 according to ...
  A: Jason, Montgomery Wards was the original K-mart or WalMart. They sold stuff from all over, most of ...
First Alert 26 guns safe replacement handle10/4/2011
  Q: Where can I buy a replacement handle for my safe? I have attached a picture of the the hub piece ...
  A: Mike, Most replacement handles for other manutacturers products are running between $60-$150 per ...
Cary Vault Door, Yale Lock10/4/2011
  Q: I have a Cary Vault Door that is missing part of the locking mechanism. I believe it is a Yale Y6 Or ...
  A: Ron, You are correct in assuming that this site will only allow one photo upload. The main ...
Protectall Safe10/3/2011
  Q: Can this safe be opened by a locksmith? Can it be reused after that?
  A: Bryan, You have asked two very good questions. In most cases I simply start out by saying that I ...
Can't open combination lock box on Mosler safe.10/2/2011
  Q: recently I had acquired a very large H72 X W43 X D32, very heavy 3,000 - 4,000 lb antique Mosler ...
  A: Cody, This is the Mosler #12 Bankers lock. It uses a four wheel pack plus the offset drive wheel. ...
Silas Herring safe with Grasshopper lock10/2/2011
  Q: Andy I saw a post you made in 2008 on a silas herring safe. I have a safe like that in my Masonic ...
  A: Maurice, First off, I NEVER recommend locksmiths for safe work, as the majority do not have any ...
Can't open combination lock box on Mosler safe.10/2/2011
  Q: recently I had acquired a very large H72 X W43 X D32, very heavy 3,000 - 4,000 lb antique Mosler ...
  A: Cody, As I haven't examined the lock or the safe to determine what course to take, I'm not going to ...
Contacting the Armor Safe Corporation to get a combination10/1/2011
  Q: This is a receipt for a question you recently asked at allexperts.com, in category Locksmithing. ...
  A: George, I'm not sure if you sent me this email or if the system forwarded it to me as I've never ...
Opening a Mosler Cannnonball safe9/30/2011
  Q: We have a Mosler Cannonball safe that has not been opened for 20 plus years. We have the ...
  A: Charles, Sounds like you have one of the early cannonballs, the later ones the lock was an intergal ...
sergent & greenleaf safe9/30/2011
  Q: I have a old safe that there is no combination number to be remembered by owner now it is setting ...
  A: Rodger, If you were looking for drill points or opening information other than the dialing squences ...
Shaw walker safe9/30/2011
  Q: good morning, I am contacting you in regards to a locked shaw-walker. I am robert menzock, ...
  A: Robert, There are no records available for these containers. It may be a standard GR2 lock, or it ...
Opening a Mosler Cannnonball safe9/29/2011
  Q: We have a Mosler Cannonball safe that has not been opened for 20 plus years. We have the ...
  A: Charles, The main locking mechanism for this door was an Automatic Lock on the interior that could ...
Can't open combination lock box on Mosler safe.9/29/2011
  Q: recently I had acquired a very large H72 X W43 X D32, very heavy 3,000 - 4,000 lb antique Mosler ...
  A: Cody, The lock is known as an LOBC or "locked on by combination", which means that you need to have ...
York Safe9/29/2011
  Q: Have a small York Safe that is fixed in a wall that we do not know the Combo to. This safe was left ...
  A: Eric, There are only three reasons a safe lock won't operate, they are: 1. Incorrect dialing ...
Diplomat 1009/29/2011
  Q: The combination has been lost. Is there anyway, short of drilling it out, to get it open. We are ...
  A: Chuck Drilling when done by a professional safe technician will not destroy the safe, and the small ...
Hall's Safe9/29/2011
  Q: I recently acquired a Hall's Safe and found alot of good information on it myself. By researching ...
  A: Ken, I'm impressed that you have take the time to track down all of the information for your safe. ...
Thayer & Edwards Salamander safe9/29/2011
  Q: I just picked up an old safe. It has metal casters and on the door is says "Improved Salamander ...
  A: Jake, The answers would be yes, yes, and yes. This company was only in business from around 1838 ...
Old Safe9/28/2011
  Q: I'm trying to help out an elderly lady whose husband recently passed. She has an old safe with the ...
  A: Greg, The reason that she can't find anything out about this company, is that it wasn't a ...
Hermann Safe Company vault door9/27/2011
  Q: I have a chance to salvage a Hermann Safe Company vault door from an old bank building in downtown ...
  A: Eric, There are a couple companies in the LA area that specialize in this type work, but I think ...
First Alert 26 guns safe replacement handle9/27/2011
  Q: Where can I buy a replacement handle for my safe? I have attached a picture of the the hub piece ...
  A: Mike, FirstHave you tried contacting the manufacturer? Even if you came to me with this request, ...
Victor Fire Master LX combination safe9/27/2011
  Q: The safe has always been very easy to open. I accidently shut the locking drawer without realizing ...
  A: Sandra, These containers haven't been made since the mid 1950's. There are no parts available for ...
The Protector / safe d posit Safe9/27/2011
  Q: I recently had my entire handbag stolen. Inside were my keys and combo to my safe which I now need ...
  A: Krista, The "Protector" safe were inexpensive "fire resistive safes". These are not burglary ...
Cramer Bros Safe9/27/2011
  Q: I recently purchased what I believe to be some sort of night deposit or slip in safe. It was ...
  A: Jamie, Here is the basic info: CRAMER BROS. SAFE CO. Kansas City, Mo (1886-1940) Founded in 1886 ...
cary safe9/26/2011
  Q: I have an old safe which I believe to be a Cary. On the inner door panel the name has been damaged ...
  A: Craig, Sorry, there is no such thing as "after markets" parts for old safes. You either find ...
re: changing combination9/25/2011
  Q: I have a Schwab fireproof combination lock safe size 22"H x 22"D x 18"W manufactured in the early ...
  A: Joel, Schwab didn't make their own locks, they used both Yale and Sargent & Greenleaf (S&G) locks. ...
Dimensions of a 1920's Herring Hall-Marvin four screw mounting lock heart9/24/2011
  Q: I'm looking for parts or dimensions to manufacture parts for a four screw mounting lock heart to a ...
  A: Tony, Good luck! Herring-Hall-Marvin didn't manufacture the locks used in their safes. In general ...
asbestos9/23/2011
  Q: We have very old about (40 years)Victor Firemaster LX filing cabinets that has a white substance on ...
  A: Dennis, While Victor was owned by Remington-Rand between 1927-1956, it was a separate company. ...
mosler9/23/2011
  Q: I have an old Mosler Vault with a Pressure locking system, it has mosler 4 wheel locks, the vault ...
  A: Erhard, Change keys only work for certain locks. For instance a 301/401 change key will not work ...
Cole Steel Cabinet w/Safe9/22/2011
  Q: We have inherited an older Cole Steel File Cabinet w/Safe, but no combination has been located at ...
  A: Robin, This isn't really a safe, it is simply a locking cabinet, within the "file cabinet". If the ...
Bernardini9/22/2011
  Q: I have the opportunity to purchase a Bernardini 6836. Two questions: 1) Bernardini last made safes ...
  A: Bob, The "Humidity" problem, is as much myth as it is real! While some safes may exhibit a ...
Old large safe9/22/2011
  Q: I have an old large floor safe on wheels in my house that was left by the previous owner. It was ...
  A: Paul, I would recommend that you have the safe serviced, which could be the majority of the ...
removal of lock nest9/21/2011
  Q: I recently obtained a safe that has water damaged caused by hurricane Katrina. The seller thought it ...
  A: Randy, You are correct in your assumption that this lock was not used by Hall's. There were two ...
Star safe9/21/2011
  Q: I have a star safe that has 4 numbers and a key to open I have the combination and key I just don't ...
  A: Leslie, Yes the 4-3-2-1 still applies. The only differences on the star round doors was the older ...
combination9/21/2011
  Q: I do not have the combination of a safe I inherited from my Mother. She never had the combination ...
  A: Mary, Sorry, but retrieving original combinations from the factory, usually require that the ...
H. H. Marvin safe9/20/2011
  Q: My sister has a Marvin safe model # 2115-HR Ser # R-185814. She's trynig to find the age and ...
  A: Judy, There was no such company as "H.H. Marvin", the company was "Herring-Hall-Marvin". These ...
Mosler safe serial # 2138619/20/2011
  Q: Yes I just purchased a safe at an auction and was wanting to know about how old it is. The serial # ...
  A: Dan, based on your serial number I would place it around 1911 (1910-1912). Unfortunately, as there ...
armory safe9/19/2011
  Q: Inherited a large gun safe bought in 2007? has script lettering "ARMORY" on door. uses mechanical ...
  A: The dialing sequence is the same for the group 2 and group 1 S&G locks with the exception of the ...
Hall's Safe Co.9/19/2011
  Q: It is a large safe with the name "The Hall's Safe Co." below the name is Cincinnati the problem is I ...
  A: Gordon, Unless he can drill the lock without causing any damage to it, I would be very hesitant to ...
Sperry Rand9/19/2011
  Q: I just read your answer to Lisa on the Sperry Rand Victor Firemaster LX 4 drawer cabinet. I have one ...
  A: Steve, These containers haven't been made since 1956. Parts are not available, and the ...
armory safe9/19/2011
  Q: Inherited a large gun safe bought in 2007? has script lettering "ARMORY" on door. uses mechanical ...
  A: The "Armory" would be a model or logo, not a manufacturer. I looked at my photo data base and ...
Mosler Safe9/15/2011
  Q: In regards to my previouse question I have more infromation about the product, I bleive I have this ...
  A: Javier, Are you comparing your safe to another that you found on the internet, or do you actually ...
Mosler Safe9/15/2011
  Q: We have a safe that has been in the building longer than anyone who works here, nobody seems to know ...
  A: Javier, My service area is Northern California. As I am "coin operated", there is no such thing as ...
Old Climax DEtector Lock9/15/2011
  Q: In one wall in the house is an old safe for which i have no key - I attach a photo of the lock - can ...
  A: Patrick, While the easy answer is "yes" the lock can be picked open, and new keys made for the ...
Need to change the pin on my safe9/15/2011
  Q: .. I just need to know what I got to do to change the pin on my safe. It is a small yale safe that ...
  A: Michele, I'm not sure "what" pin you are trying to change? I'm going to assume that you mean the ...
vanguard vs-200 safe9/15/2011
  Q: I have a vs-200 safe and am trying to figure out if the combination can be changed. I took the door ...
  A: matthew, If the safe has hand change wheels then the combination can be changed. If they have ...
Lock box guard key9/13/2011
  Q: How do you set the guard key on a 7737 double little nose new safety box lock? Guard key 701-705. ...
  A: Dean, Sorry for taking so long to get back to you. I've been constantly in the field the past ...
Cole Filing Cabinet Safe Last Resort9/12/2011
  Q: Sir: Thank you for your prior answers to others re: Cole Steel Equipment Co. filing cabinets w/ a ...
  A: Mick, My recollection of the lock on the "Cole" cabinets, is the dialing sequence should be: 4 ...
key for Sentinel gun safe9/12/2011
  Q: I have a Sentinel gun safe model GCW-8 and lost the key when we moved. Can you tell me who to call ...
  A: Jim, I'm assuming that you have a Stack-On Safe, "Logo - Sentinel", model GCW-8. First thing is ...
Victor Safe & Lock Co.9/10/2011
  Q: I have an old Victor Safe, I would like help determining it's age (year built), on the dial is ...
  A: paul, Patent dates were issued for up to 20 year periods and have no bearing on manufacturing ...
Hercules closet vault9/10/2011
  Q: I have a combination safe that looks rather old, and i'm unsure on how to get information on it. It ...
  A: Justin, "Hercules" was a "model line" logo, these safes were Manufactured by the Meilink Safe ...
Sargent greenleaf 6700 combination9/9/2011
  Q: I have a floor safe that has a Sargent Greenleaf lock, the lock is locked but not into the safe ...
  A: Bill, resetting the combination without knowing the current combination WILL require removal of the ...
Floor safe9/9/2011
  Q: I have a 20-25 year old rectangular Star safe cemented in the floor of the basement. The T-handle is ...
  A: Alfred, Assuming that the lock is retracted all the way, the handle shaft should lift and turn ...
Antique Macey Cabinet Safe? Help identifying9/8/2011
  Q: I recently acquired a unique safe. I believe it is an Antique Macey Cabinet safe. It is pretty big ...
  A: Patrick, Sorry, but I don't think you have what you think you have! Did that make sense? Even if ...
sears tower safe9/6/2011
  Q: I have a Tower safe class 'c', its green with two hinges. Any quick values would be appreciated. ...
  A: DAVE, First off, I don't do "off the cuff", or "ball park" figures. If you want a value of the ...
Hercules Meilink combo safe9/5/2011
  Q: My wife was given a two feet by two feet by one foot combination safe with numbers written from 1 to ...
  A: Clint, First off, this container is NOT a safe. It is simply a portable document storage ...
Sticky Dial9/5/2011
  Q: Several years ago, I inherited a Sentry Safe model # 6330. I don't remember exactly when my parents ...
  A: Dawn, Sentry safes are inexpensively built (cheap) safes. They are made out of pot metal and ...
Protectall safe combo9/4/2011
  Q: The old safe I got has about 9 numbers The woman said that these numbers were the combo. Is that ...
  A: Dana, "Holy Heck Batman"! She did give you a whole bunch of numbers!!! There are only three ...
Protectall safe combo9/4/2011
  Q: The old safe I got has about 9 numbers The woman said that these numbers were the combo. Is that ...
  A: Dana, I would need to see the combination that she has given you to try to intrepret what she is ...
Diebold safe9/4/2011
  Q: Andy, I've recently inherited my family's original homestead, in the house is a diebold safe, it has ...
  A: Rich, I'll give you the names of a couple companies, you can discuss their charges and fees ...
Diebold safe9/3/2011
  Q: Andy, I've recently inherited my family's original homestead, in the house is a diebold safe, it has ...
  A: Rich, The date (1871) is simply a patent date, NOT a manufacturing date. Patent dates would be ...
Yale Safe/Lock9/3/2011
  Q: I have an old heavy safe that was used in a grocery store 60 years ago. It is about 24"X15"X15". ...
  A: Art, The first order of business would be to actually ID what you have. YALE was a lock ...
replacement victor combo9/1/2011
  Q: today i had to drill a broken combo on a 2oct 1888 victor safe. i need to find a replacement. can ...
  A: Lou, There haven't been any parts available for this lock in about 100 years. You will need to ...
Hall Safe Company Cincinnati Ohio9/1/2011
  Q: We recently found an old Hall Safe Company, Cincinnati Ohio safe in the basement of our house but we ...
  A: Ryan, You are correct that this safe should be able to be opened by a trained safe technician from ...
Sisco, Inc safe (Brinks)8/31/2011
  Q: We have combination and key yet safe won't open.---Any hints.--- Thanks!
  A: Phillip, Unfortunately, you probably won't like what I have to say, but since you asked - The ...
Cannot Open Major Safe8/30/2011
  Q: I noticed that you know something about opening Major safes. Our Major safe was left by the previous ...
  A: Tony, The dialing sequence is: 4 times left to the first number, (80) 3 times right to the second ...
old diebold safe8/29/2011
  Q: i have a old diebold safe im trying to open but have no idea what the combo is there is no serial ...
  A: John, If the safe has a Group 1 lock on it, you can forget "manipulation". You have two choices, ...
Combination of old safe/file cabinet8/28/2011
  Q: I have an old file cabinet/safe that is labeled Meilink Built Hercules. No. 777557; it has a Safe ...
  A: Steve, Great, I know of several really good safe guys that I would recommend, some are going to be ...
Herring-Hall Marvin Safe8/27/2011
  Q: I just got this safe for $25 at an estate sale, the handle works but the dial is stuck. I have what ...
  A: Celia, I'm not sure "WHAT" help you are requesting? Generally, mechanical problems (like you are ...
Mosler safe8/27/2011
  Q: I would like to find a source for the hinge acorns as well as any info available on the paintings on ...
  A: Allen, As far as the "Acorns" go, you will need a machinist to make them for you. I have one that ...
diebold safe8/27/2011
  Q: i have a diebold safe no.143465 combo got lost how do i open it it is a combo lock? thank you
  A: kellie, If you don't have the combination, you have two options, you can try all of the possible ...
Combination of old safe/file cabinet8/27/2011
  Q: I have an old file cabinet/safe that is labeled Meilink Built Hercules. No. 777557; it has a Safe ...
  A: Steve, While you can check with the factory, they generally only have the last 10 years worth of ...
Combination8/25/2011
  Q: Bought 1991 5th wheel it has a safe (Built-in) in one of the cupboards. No key, no combination. ...
  A: Pete, The "Saga" safe company is in China. This containers are imported, but I don't know of ...
Victor Safe and Equipment Co.8/25/2011
  Q: I recently acquired a Victor Safe that was going to be sent to scrap! I interceded and had it ...
  A: Greg, First off, lets set the record straight, the safe was NOT originally intended for storing of ...
Locked Safe/Please Help.8/24/2011
  Q: ~It does say Mosler on the top corner.There is a serial # tag on it, A bunch of paten numbers on a ...
  A: Bruce, With 1,000,000 possible combinations to choose from what would you guess the combination ...
SAFE WEIGHT AND AGE8/23/2011
  Q: I RECENTLY PURCHASED A USED PROTECTALL SAFE WITH A OUTSIDE DIAL COMBO AND A SMALL INSIDE SAFE COMBO ...
  A: Randy, Protectall safes were made between 1930-1949. The company was acquired by Mosler Safe ...
Diebold Cylinder8/23/2011
  Q: Andy, On 5/15/2009, you answered the following"Tring to remove the lock on the drawer so I can go a ...
  A: Chris, Unfortunately the original answer was almost 2-1/2 years ago, Diebold parts are not cheap ...
No combination.8/23/2011
  Q: I have an old York Safe and Lock Co. safe. It's a safe in a safe and has two cylinders, one on the ...
  A: Dan, Simply disassemble each wheel pack to see what combination is set on it. In the photo, the ...
lots of numbers8/22/2011
  Q: I just hauled a diebold safe in from Iowa. It has a patten of May,24 1871. It is 4 ft tall 30 in. ...
  A: Gene, The biggest problem with getting a safe from someone else, is that they tend to write the ...
Sears and Roebuck tower safe8/22/2011
  Q: I've inherited a Sears and Roebuck tower safe with Yale knob/dial. Markings are: Class C 1704 (on a ...
  A: Cathy, Sears and Roebucks, purchased safes from a number of different manufacturers over the years, ...
lost key8/21/2011
  Q: i have a sisco 1190 safe but i dont have a key how can i get a key for it please
  A: Allan, Sisco is currently marketed in the US under the Honeywell label. You can give Sisco ...
Art Steel Co. Cabinet with Safe8/20/2011
  Q: I was given this cabinet and managed to decipher the combination, but the bolt doesn't retract ...
  A: Karl, First off, manufacturers NEVER published diagrams or schematics for obvious security and ...
mosler safe SFC 4 combination change8/20/2011
  Q: I was just given a Mosler SFC 4 four drawer locking file cabinet. It is unlocked and I do not have ...
  A: Lewis, Unfortunately, you are only partially right concerning the lock. The lock is either a ...
CARY FLOOR SAFE8/19/2011
  Q: Back in 1992 I purchased a business and a CARY FLOOR SAFE came with the purchase it is very old and ...
  A: Ruth, Ok, I'll start with the corrections first - you don't have a "B.E. Dayton" safe, this was ...
Victor Fire Master LX File Cabinet8/19/2011
  Q: We have a Victor Fire Master LX locking file cabinet that is still in excellent working order. Our ...
  A: John, There is no such thing as a "common" key. While most of the locks are all keyed differently, ...
safe no combo - Meilink8/19/2011
  Q: my wife has a floor safe and has lost the combination. It is a Meilink SG380, Toledo, Ohio. It ...
  A: Stephen, You can contact Meilink to see if they have the original combination on file. Meilink was ...
Eastern Research safe- no combo8/19/2011
  Q: Took it out of a demo job, it is open. Can I get the combination reset so i can use it? Or do I ...
  A: Stephen, These safes don't have a lot of combinations "built" in. It is a screw change type lock. ...
Locked Excalibur Gun Safe8/19/2011
  Q: I purchased a foreclosed home last year that has a fairly large gun safe in the basement. The gun ...
  A: Neil, My understanding is that FireKing Int. sold the "Excalibur" gun safe line to Granite Security ...
Locked out of my champion safe.8/19/2011
  Q: Andy, I have a champion safe Model: MODEL T-21 with mechanical lock. I have used it for over a year ...
  A: Bradley, Champion uses the Sargent & Greenleaf lock on their safes. This is probably one of the ...
Mosler Safe Year?8/19/2011
  Q: i have a mosler 2 door safe, ive had it for about 20 years and wanted to know what year it was made. ...
  A: Travis, I'll need to see what you have to answer your questions. In order to answer questions, ...
diebold safe (old)8/18/2011
  Q: what does return to stop mean at the end of the cobination? we have the combination but we cant get ...
  A: Billy, Inside of the lock are four wheels. three of the wheels hold the combination to open the ...
Locked Safe/Please Help.8/18/2011
  Q: ~It does say Mosler on the top corner.There is a serial # tag on it, A bunch of paten numbers on a ...
  A: Bruce, This is a nice Mosler Safe. It is from the mid 1960's to the late 70's, not the 50's. ...
Locked Safe/Please Help.8/18/2011
  Q: ~It does say Mosler on the top corner.There is a serial # tag on it, A bunch of paten numbers on a ...
  A: Bruce, First off, if anyone "offers" to "CUT" into your safe to open it up, run quickly away from ...
J&J Taylor Safe8/17/2011
  Q: We found an antique J&J Taylor safe in an old department store we were renovating a number of years ...
  A: Andrea You have a nice looking little JJ Taylor. The "S.D. Matthews" would have been an owner at ...
xo9 lock- accesscontrol8/17/2011
  Q: hi there have an x09 lock that I am hooking to a pin prox reader have to run wire across door to ...
  A: Terry, I'm not into the electrical, alarm side of the house, so I don't have any definite answers ...
Changing combination of a Meilink mechanical combination vault8/16/2011
  Q: I have an old Meilink vault with a mechanical combination lock in my office. The vault is opened. ...
  A: Wayne, This is one of the reasons that I NEVER recommend the DIY approach to working on locks. ...
Cole steel cabinet combination lock8/16/2011
  Q: You answered a question for Matthew on 6/14/2011 about a Cole Steel Office Cabinet with a built in ...
  A: Lynn, these parts are obsolete. Probably the only place you will find the parts would be on ...
cary safe8/15/2011
  Q: i have just purchase cary safe outside dimensions are 17x12x13. it has a number 3059 stamped on ...
  A: Dave, The Cary Safe Company was in business from 1878 until 1929. Safes didn't start getting ...
Keep Safe Serial #10777548/15/2011
  Q: I have an OLD Keep Safe dial combination type safe. I don't think the original combination that ...
  A: Doug, The simple answer is no! Only a few manufacturers sent out ALL of their product on the same ...
safe identification and age8/15/2011
  Q: I belive the safe was built by Mosler as there are two dial mechanisms which both say Mosler on ...
  A: Matthew, the numbers on the faces of the dials are "hours", this would be a three movement, 120 ...
Yale Safe8/14/2011
  Q: I have a yale safe that some friends of mine gave that their father had but they did not know the ...
  A: Tom, The safe is NOT a Yale safe. Yale was a lock manufacturer ONLY! Many different manufacturers ...
paint8/13/2011
  Q: In the restoration process what paint is preferred lacquer or enamel? Anyone doing a satin finish ...
  A: Louis, The preferable type of paint would depend on the finish you desire. If you are basically ...
old fire safe file cabinet8/11/2011
  Q: Safe Cabinet Laboratory Spec F2-ND 4Y297551 81141G These are the numbers on the tag. Was wondering ...
  A: Dean, SMNA SPEC "F2-ND" indicates a file cabinet or container, NOT a safe. The SMNA label only ...
Scentest safe will not lock8/10/2011
  Q: Good day, I was wondering if I could get your advice. I inherited a Scientest Safe Cabinet from my ...
  A: Archi, These safes weren't what I would call "quality" safes. Built out of thin sheet metal with ...
Cary Safe Double Door w/antique safes8/10/2011
  Q: I'm looking to purchase a safe like the one below or something similar to it...any suggestions on ...
  A: Ken, There are literally 1000s of old or antique safes for sale, you just have to look. If you've ...
Safe8/9/2011
  Q: 20"wide, and 21" deep, gray in color, on wheels. It is perfect working order with the combination. ...
  A: Patrice, Your safe is a Herring-Hall-Marvin from the late 1950's. HHM was acquired by Diebold in ...
Remington Rand Safe File8/8/2011
  Q: I have a 4 drawer Remington Rand Safe File. All of a sudden the lock will not unlock. The key will ...
  A: Karo, First off it may not be a lock problem. The lock operates a spring loaded "gang bar" that ...
protectall8/7/2011
  Q: i got a prtectall fire safe at a sale,,,, it has an indian head beside the name protectall and on ...
  A: Bill, There are only three reasons a safe lock won't work, they are: 1. Incorrect dialing ...
Hall's Safe Co. Cincinnati # 36288/7/2011
  Q: I just bought this safe from a local add in the paper. After looking more into it, I realized how ...
  A: Robert, Obviously I will need to see your safe to answer your questions. In order to answer ...
Recommended Safe Brands8/7/2011
  Q: We have a Sentry safe that has an electronic keypad that we bought several years back. The handle ...
  A: Ellen, While the simple answer is yes you need to change safe, I've never been known to go with the ...
Safe8/7/2011
  Q: The locking mechanism doesn't engage fully. It seems like the locking bars don't line up with the ...
  A: Susan, If you have a mechanical problem, you will need to have it checked out by a safe technician ...
Strong Box8/6/2011
  Q: G'Day,I was hoping you can tell who made this box ,there no marking on it and what country it comes ...
  A: Mick, What you have is a "Misono High Class Hand Safe", manufactured in Japan, probably between ...
Date, Halls Safe & Lock Co.8/6/2011
  Q: Our small, non-profit museum has a safe from the Halls Safe & Lock Co. with a local business name on ...
  A: Steve, Unfortunately, there are no records indicating years of manufacture by serial number, ...
changing a combination8/6/2011
  Q: I have a safe I would like to change the combination to. It's from the ( The Safe-Cabinet Co.) ...
  A: Mark, The Safe Cabinet Company was in business from 1905 to 1926 when it was acquired by ...
Mosler Safe8/6/2011
  Q: We have a 3 number combo but does not work ser.#112249 is on the handles.I was wondering if there ...
  A: Harrell, There are ONLY three reasons that a safe lock won't work, they are: 1. Incorrect dialing ...
Diebold/Mosler Safe8/5/2011
  Q: I have this old massive safe in the basement of my home,left there by parents, and grand parents, ...
  A: John, I have a couple of names for you. The first one is one of the top safe crackers on the east ...
Diebold/Mosler Safe8/4/2011
  Q: I have this old massive safe in the basement of my home,left there by parents, and grand parents, ...
  A: John, I believe you have already sent photos to my email address, so this would be a duplicate. ...
Fire Fyter FF3075 safe8/4/2011
  Q: I have a large Fire Fyter FF3075 safe. I have the key and combo. The problem is the latch ...
  A: Mike, Well you hit the nail on the head on this one. What was it that Benjamin Franklin said? ...
lost key!8/3/2011
  Q: I have a victor treasure chest and i lost the key to it ,is there any way i can open it without one ...
  A: Frederickia, I'm not sure what a "treasure chest" is? None of the manufacturers ever made an item ...
Question about Vanguard VS-200 safe8/3/2011
  Q: I recently came into possession of a Vanguard VS-200 safe that i recieved due to a death in the ...
  A: Kieran, Very few of the manufacturers that export safes from asia or europe will answer questions, ...
13 old safes8/2/2011
  Q: Have a friend who has inheirited 13 old safes---all closed, and in various conditions--has pages of ...
  A: Wesley, Just so happens I know of a great safe man not to far away that can help you out. Ray C. ...
Meilink safe8/1/2011
  Q: The previous owners of our house left a safe in the basement. 21" deep, 19" wide, 30" high (includes ...
  A: Larry, Generally in a case like this, with the safe locked up, and hard to remove, the value is a ...
safe age and value8/1/2011
  Q: I bought a house in France last year that was built in 1901. I discovered a large old safe under ...
  A: Kim, As you are in France you can contact Fichet-Bauche to see if they have any records to give you ...
Tss C58/1/2011
  Q: Help my father in law forgot how to turn the dial to unlock his TSS C5 safe, any idea? ANSWER: ...
  A: Terry, In this case the key IS your handle. Turning the key will result in your feeling resistance ...
rusted safe door8/1/2011
  Q: I have a safe that is unlocked, but it has been outside for some years and the door will not open. I ...
  A: Brian, You probably have more problems than it just being rusted shut. By itself, rust swells into ...
saf-d-posit8/1/2011
  Q: I have a customer that has a saf-d-posit. Model #1100. Sn 13137. Customer lost combation. Please ...
  A: Louis, I'm not quite sure what you are asking for? There aren't any records available from the ...
Yale lock for Shaw Walker safe8/1/2011
  Q: The Yale lock on one of our beloved Shaw Walker vintage fireproof safes, letter size, 4 drawers, ...
  A: Bill & Teresa, Sorry, but I work on safes and vaults and related equipment, Shaw Walker file ...
Mosler safe.8/1/2011
  Q: I have a Mosler safe. what have I got here and and is it worth haveing the combination reset?
  A: Glenn, Your question is a little vague. Value varies from person to person AND from object to ...
Pistol Safe Opening7/31/2011
  Q: I hope you can help here - I have a Cannon Safe that has been locked for a few years following a ...
  A: Andy, This is not a safe, it is a portable security box or pistol box, meant for transporting ...
Tss C57/31/2011
  Q: Help my father in law forgot how to turn the dial to unlock his TSS C5 safe, any idea?
  A: Terry, TSS is not a manufacturer, they have simply relabeled imported style safes. The dialing ...
antique mortise locks7/31/2011
  Q: My house has all original mortise locks, over 60 yrs old. Most of them work ok, but one of them is ...
  A: Doug, Generally I would pass on questions like yours as even though I'm a "Locksmith" by trade, I ...
Mosler Safe7/20/2011
  Q: Andy, I have a Mosler safe Model 3016, serial # 255-678. It is 55" high and 28" wide. Was wondering ...
  A: Rick, Chances are the "serial number" you are looking at is off one of the "rating" tags. This ...
I need this safe opened ASAP7/19/2011
  Q: I am currently staying with family and in my grandmothers house she has a mosler safe she hasn't ...
  A: Amikar, All the Mosler left the factory on the same combination. The working combination would be ...
Old Meilink Safe7/18/2011
  Q: I moved into a house, and behind a cabinet door I found an old, tarnished safe built into the wall. ...
  A: Natalie, The Meilink Safe Company was in business from 1899 until it was acquired by FireKing ...
Herring & Co. Safe7/18/2011
  Q: I would like to know more about the family safe. We have the combination, interior keys, etc. The ...
  A: Anita, Herring & Company was in business from 1844 until their merger with the Hall's Safe & Lock ...
safe opening7/18/2011
  Q: I am a recipient of an old safe that has this on the dial. Cincin, o Mosler + Bahmann & Co. It ...
  A: Jerome, One of the problems that I see regularly with older safes is that people tend to provide ...
fireking fireproof file cabinet7/17/2011
  Q: I was given a vertical four drawer fireking file cabinet and the lock was accidently pushed in, and ...
  A: Janet, Yes the lock can be removed, but the drawer has to be opened to do it. The serial number of ...
Saga Model 1100 safe7/16/2011
  Q: How do I open the lock of a Saga Safe-d-posit Model 1100 safe with the combination? I have the ...
  A: Patty, Saga safes were manufactured in China, and imported. They used a couple of different locks ...
Forgot passcode and can't open lock7/16/2011
  Q: A year ago i purchase a sentry lock from Sam's club,took it to my home country, but forgot my ...
  A: Villate, You will need to contact Sentry to obtain a code, if available. ...
I cannot open my safe7/16/2011
  Q: Mosler safe model 13. Serial number 24007-25. i cannot open the safe, will you help me?
  A: Bob, There are only three reasons a safe lock will not work, they are: 1. Incorrect dialing ...
Opening a locked gun safe7/14/2011
  Q: We have a gun safe with a dial. We know the combo but my hubby can't remember whether you start ...
  A: Sheila, The dial sequence for the Unican Ilco combination lock (obsolete, no longer made) is: 4 ...
Tilton & mcfarland safe combo lock7/14/2011
  Q: Andy, We just picked up a free Tilton & Mcfarland floor safe. It is going to be my new garage ...
  A: Patrick, If you need help, you are in my neck of the woods. I live in Antioch and our shop is in ...
Key made by # on safe7/14/2011
  Q: I have a Sperry Rand VICTOR Fire Master and I have the Building Material Index #, is there a way to ...
  A: Sandi, The key locks on the safe were NOT made by Sperry-Rand or Victor, they were probably made by ...
Cabelas Classic Safe Lockout7/14/2011
  Q: We have had a Cabelas Classic Safe for over a year, and have had the same code since then. Somehow ...
  A: Briana, Unfortunately, you haven't provided me with any useful information. Cabelas isn't a ...
Shaw Walker Combination lock7/13/2011
  Q: I have an old Shaw Walker 5-drawer vertical metal file cabinet with a combination lock upper right ...
  A: Terry, If your container has an S&G lock (or similar), the dialing sequence would be: 4 times left ...
early 1900's Cary floor safe #203305 size 2x3x2ft.7/13/2011
  Q: what year is it? It's got original paint in good cond.what is it worth retail? thanks. Ron
  A: Ron, Your Cary is 1920 to 1929. It has no "retail value", as it does not meet current fire or ...
meilink hercules safe s-239417/12/2011
  Q: I WAS GIVEN THIS SAFE WITH NO COMBINATION,WHERE CAN I GET THIS INFO AS WELL AS DIRECTIONS TO TURN ...
  A: Rich, Meilink was acquired a number of years ago by Fire King International, which has in turn been ...
Drill Bit Selection7/12/2011
  Q: Terry, we have a 22 X 39 X 51 ART METAL GSA Security Container that has a S & G lock. We are having ...
  A: Kirk, These safes are fire resistive safes only and have no hardplate to speak of. Tungsten ...
no combo7/12/2011
  Q: Protectall 19 wide,24-1/2 deep,31 tall. All I have is the SN. Can a list of possible combinations be ...
  A: Robert, The combination will have three numbers in it, and the sequence will be: 4 times left to ...
safes7/12/2011
  Q: I got an old safe from my mom with the combo included, however nobody can open it, the combo is ...
  A: Pat, The manufacturer was John D. Brush, Jim Dandy Safe Company was merely a seller of safes. As ...
no combo7/12/2011
  Q: Protectall 19 wide,24-1/2 deep,31 tall. All I have is the SN. Can a list of possible combinations be ...
  A: Robert, Manufacturer's NEVER release or publize records such as combinations that were set on safes ...
SAF-D-POSIT COMBO7/11/2011
  Q: I HAVE A OLDER SAGA INTERNATIONAL INC. SAF-D-POSIT SAFE. WE HAVE LOST THE COMBO, BUT SAFE IS OPEN. ...
  A: Gary, These Saga safes haven't been made in years. While they are still in business in China, they ...
safe combo quit working7/10/2011
  Q: This safe had sat for years, door open, handle in the lock position. After numerous attempts with ...
  A: Chas, There are only three reasons that a safe lock won't work, they are: 1. Incorrect dialing ...
Keyless SG 8500 MP7/10/2011
  Q: Andy, I have a Allied-Gary HR3028 S/N 61744w/1-92, w/ a SG 8500 MP group 1 combination lock w/out a ...
  A: Dan, I will have to look at the safe to compare it to something comparable that is currently ...
Gunsafe repair7/10/2011
  Q: I'm looking at buying a safe that is locked and I'm unable to get the door open, the door handles ...
  A: Michael, Cabelas doesn't make safes, so it isn't a Cabelas. While it may have been sold by them, ...
Keyless SG 8500 MP7/10/2011
  Q: Andy, I have a Allied-Gary HR3028 S/N 61744w/1-92, w/ a SG 8500 MP group 1 combination lock w/out a ...
  A: Dan, Yes a key can be made for the dial plug, or a new plug w/keys can be installed. If the ...
SAGA SAFE-D-POSIT SAFE7/10/2011
  Q: I have tried to no avail I put in the key and it won't turn to release the dead bolt, but the dial ...
  A: Jerry, As I mentioned in your first email, "manufacturers figured out the "remove the hinge" trick, ...
Sargent R6700 Series7/9/2011
  Q: 1) There appears to be a safety mechanism where if the cover is removed exposing the inner ...
  A: Dominic, the "arm",inside of the lock is called a relocking trigger. Its purpose is to block the ...
Yale Globe Safe7/9/2011
  Q: I have an old safe that says Globe on the top and Yale on the lock. I have the combination and when ...
  A: Moritz, Chances are you aren't completing the rotation. The dial should stop around 10, not 0. ...
SAGA SAFE D POSIT MODEL 11807/9/2011
  Q: I have the key and the combination to the safe but I can't for the life of me, remember how many ...
  A: Jerry, First off, manufacturers figured out the "remove the hinge" trick, about 150 years ago, and ...
Open safe combination\re-atteching locking mechinism7/7/2011
  Q: My friend bought me an Older Sears fire safe at a garage sale. info on safe is F1-D. Y535519. Safe ...
  A: Joseph, I checked my current Diebold parts catalogs. The lock was an "S&G" lock built for Diebold ...
Digital Keypad Problems7/7/2011
  Q: I have a 6 yr old Protex HD-100 with a digital keypad. Since I have to open the keypad up every ...
  A: Dee Dee, Digital locks, just like computors change at a rapid rate. Every 6 months new models are ...
lost combination mosler safe7/7/2011
  Q: This safe been in the family many years, have no info or instructions to it. The handle number is ...
  A: Trudi, Based on your serisal number, the safe was built between 1905-1910. There are no factory ...
old diebold safe openeing7/7/2011
  Q: my boss bought and ild diebold safe at aution we have the combo but cant seem to get it open. the ...
  A: Michael, Generally when someone has a cokmbination and it isn't working, it is because of a simple ...
removing a vault door7/6/2011
  Q: I was asked about the possibility of removing a Mosler vault door from a bank that has been ...
  A: Jake, I doubt the door will lift straight of the hinges. These doors are NOT the same as simple ...
Old safe, how to open!7/5/2011
  Q: I moved into my house 19 years ago. The man who lived here before had died and left behind a wall ...
  A: Katie, I'm sorry but we do not give out opening instructions, other than basic dialing sequences ...
wheel pack7/4/2011
  Q: Andy ,I have a vintage HH M safe that is missing a wheel pack. the safe is open and seems to be in ...
  A: Mike, I received your photos. Yes the holes were probably to open the safe. When I see this type ...
3 Drawer Victor Firemaster Certified Safe7/3/2011
  Q: I have a 3 Drawer Victor Firemaster Certified Safe in great condition and would like to sell it. ...
  A: Jerold, Sorry, but I don't do "ballpark" without seeing the item. But I can tell you the following ...
Lost Combination7/3/2011
  Q: I have a Steelmaster file cabinet similar to this one except that it has 3 file draws. I did not ...
  A: Mark, Manufacturers never published records of combinations for obvious security and liability ...
proseries7/2/2011
  Q: Hey Andy, I have a old proseries safe, it was my moms and she gave it to me. But she forgot her ...
  A: Joy, I'm assuming that you are talking about a "Browning Pro-Series" safe. And I'm also assuming ...
excalibur7/2/2011
  Q: Terry, I need to know if there is someone in the Houston Texas area the works on these safes. Thank ...
  A: Leonard, I don't have any personal contacts in the Houston area, but I do have one listing in your ...
inside Safe pictures7/2/2011
  Q: The cement inside is broken up, would you recomend pouring in new cement? Also where can I buy a new ...
  A: Drew, The lock on your safe is a hand change lock, if you are mechanically inclined, you can ...
Star Safe Model 1100 S/N 0286497/2/2011
  Q: June 2009, you ordered the 0715003 Lock Kit, Combo for FS 1013 Fire safe. It was installed and ...
  A: Susan, My first recommendation would be for you to call the police and have your "family member" ...
cannot open the lock on Centurion Safe by Liberty / Model TSI 7269077/1/2011
  Q: My father was given a safe by his neice.It is open but the 3 numbers of the combination and their ...
  A: Teresa, As long as the safe is open, you aren't in trouble. If the safe is locked shut and you ...
Value of old Dibold safe7/1/2011
  Q: Mr. Andreasen, I have the opportunity to bid on an old Dibold safe. It is in good condition and ...
  A: David, Sorry, but I NEVER do values, without seeing the safe. That would be like trying to trade ...
J&J Taylor Safe ~19177/1/2011
  Q: I have recently purchased a commercial building that is almost 100 yrs old. There is an old J&J ...
  A: Caroline, Chances are "No", you won't pick up the combination from listening and feeling. What you ...
Gary Safe Combination Sequence7/1/2011
  Q: We just bought a house with a Gary floor safe. We think the Gary Safe was installed during the ...
  A: Charles, There are only three reasons a safe lock will not open, they are: 1. Incorrect dialing ...
Saga Saf-d Posit Safe6/30/2011
  Q: I have inherited a Saf-d Posit safe without the combination. The door is unlocked and I can open ...
  A: Sarah, 1. You can determine the combination by simply dialing it up while observing the wheels and ...
Allied Gary safe6/30/2011
  Q: I have a Allied Gary safe model sss 3429. I trying to find directions on how to change the ...
  A: Bob, If you would like the instructions and changing tool, you will need to send a request to me ...
Diplomat combination/key safe Lost combination6/29/2011
  Q: Please advise if it's possible to open our safe without the combination. We have the key, but have ...
  A: Kathy, No the combination must be dialed in order for the safe to be opened. If you have lost it, ...
Chubb On Guard Safe Model 46726/29/2011
  Q: My mom has a safe that she's had for awhile. She is no longer with us but she had left me the ...
  A: Caroline, As you didn't include the instructions or combination that your mother used, I can't ...
Major Safe6/28/2011
  Q: I have been offered a Major Safe for sale. Model is 4820 and serial number is 209532. I am looking ...
  A: Jamie, Unfortunately during some construction at the factory around 20-25 years ago, a small fire ...
J&J Taylor Floor safe dial marks6/28/2011
  Q: The Taylor safe I have has two markings around the dial. One is at 12:00 position with a star, the ...
  A: Mark, There are three reasons that safe locks DON'T unlock, they are (in order): 1. Incorrect ...
Old Safe: Herring-Hall-Marvin6/27/2011
  Q: In the late 70's, while working for ManPower Inc. in Phoenix, I got the opportunity to buy a large, ...
  A: Stuart, I would be happy to look at your safe to give you a "ballpark" value. As HHM was in ...
inside Safe pictures6/27/2011
  Q: The cement inside is broken up, would you recomend pouring in new cement? Also where can I buy a new ...
  A: Drew, As this is an obsolete lock, (it hasn't been made for 50+ years), chances of finding a "new" ...
Mosler Safe6/24/2011
  Q: I have a 2 door, double handle, single combination Mosler safe. It sits longer in length than ...
  A: Bill, No the 538595 is a tag number, issued by UL, not the serial number of the safe. Even if it ...
Saga 1100 info wtd.6/24/2011
  Q: I have a Saga Saf-D-Posit safe, Model 1100 which has a key, but no combination. I have access to an ...
  A: Mark, I don't mean to sound like a "smarta**", but I do have a few qestions. FirstWhy would you ...
lost combination6/24/2011
  Q: I have a Brinks safe model # 5054. It operates by combination lock in conjunction with a key. A few ...
  A: Laurie, Sisco Products was the manufacturer of the "Brinks" line of safes. Sisco is currently ...
Historical safe needs opening6/24/2011
  Q: Andy, we the Town has 2 historical safes 100+ years old, we are on the hunt for finding an expert or ...
  A: Tony, I have a couple of names for you. The first one is one of the top safe crackers on the east ...
Gardex 91506/23/2011
  Q: Andy: I need to change a broken handle on a Gardex 9150 safe. Are there special tools or ...
  A: Dan, Nope, just regular hand tools. Make sure that you clean out the spindle hole and grease the ...
Opening a safe6/23/2011
  Q: I purchased a house two years ago which had been vacant for three years. Both of the owners died ...
  A: Yuma, is kind of a black hole for safe techs, there aren't a lot of good ones near by. Probably the ...
MacNeale & Urban safe6/23/2011
  Q: Hey Andy... I recently removed a safe from a lady's house that she didn't want. I found the safe to ...
  A: Dan, There were only a couple companies that used letters instead of numbers, and MacNeale & Urban ...
Montgomery Ward Safe 90346/23/2011
  Q: I have a Montgomery Ward Safe 9034 with a Meilink Lock F-760. Could you please provide me with an ...
  A: Cindy, I would have to see your safe to provide you with a value. Generally these safes were ...
Herring Hall Marvin safe6/23/2011
  Q: I have one of these from 1922 and I was wondering how well these sell. Is it worth it to put online ...
  A: Arnee, Obviously selling an old safe will depend on a lot of items including (but not limited to): ...
TSS E5N HOME SAFE6/22/2011
  Q: Have lost the instructions for setting/re-setting the combination. Can you send? Thank you. N.
  A: NW, I have TSS listed as a European company out of the Netherlands. I'm not sure if this is the ...
diplomat 250 (standing safe)6/22/2011
  Q: have two sets of combination numbers, one with three, and one with four numbers, safe has key in ...
  A: Charlie, It will depend on what lock you have installed on the safe. Diplomat used several ...
Old Safe With Yale Three Number Combination6/22/2011
  Q: I have the safe open and am trying to restore it. I have removed two of the combination discs from ...
  A: Marion, Chances are there won't be any books at the library explaing about safe locks. If you are ...
Herring-Hall-Marvin Safe6/22/2011
  Q: I have a safe that I don't know if it's worth trying to keep it or sell it or dispose of it. I don't ...
  A: Jeri, I would be happy to look at your safe for you. Southern California Safe (SoCal Safe) is ...
H.H.M SAFE Co key found6/21/2011
  Q: I found a key in my yard in a 120 year old home that I purchased. On one side of the key it says ...
  A: Michael, This is an easy one to answer. Your key originally came from the Herring-Hall-Marvin Safe ...
Mosler vault door6/21/2011
  Q: We have a Mosler Vault for our cash room and the rod that connects the handles and allows the lock ...
  A: Patrick, Mosler went bankrupt in 2001, there are no longer any parts available without getting them ...
help on cannon safe6/21/2011
  Q: can't get in the cannon safe really dont remember changeing the code does this happen often please ...
  A: William, It keeps me in business, so I guess it happens pretty often. You may want to check with ...
Safe6/20/2011
  Q: I would like to change the safe combination on our safe. We recently removed A manager on duty that ...
  A: Ann, do you have a mechanical lock (dial combination), or do you have a digital lock (electronic ...
2 safes with no info6/20/2011
  Q:
  A: Alan, Both of these safes are probably going to weigh in around 1800 to 2000 lbs. The doors on ...
Cary Safe6/20/2011
  Q: We recently acquired a Cary Safe, the number on the handle is 191682. The dimensions are ...
  A: Robert, I would be more than happy to look at your safe. In order to answer questions, identify, ...
asbestos in safe lining6/18/2011
  Q: I finally got around to opening a safe that my father had in the basement. I pried on it and ended ...
  A: Brian, You didn't provide me with any useful information about the safe, like the manufactures name ...
Hall Standard Safe question6/18/2011
  Q: I have a Hall Standard Safe (last pat. date 1887). Outer doors work fine. Inner plate doors work ...
  A: Tim, Wow, that's a heck of a lot of questions about a little safe! As "Hall's Safe & Lock Company" ...
Brpken Safe Lever handle6/18/2011
  Q: I have been called to unlock a Steelage Safe TL-30 with both the key and combination(I am not asking ...
  A: Bharat, SteelAge made a number of different types of safes, some were very intricate and some were ...
Broken lock core6/17/2011
  Q: Our Victor locking fireproof file cabinet's lock broke. We have not been able to find a replacement ...
  A: Gayle, As Victor went out of business when it was acquired by Sperry in 1957, I would agree that ...
Herring-Hall-Marvin Safe6/17/2011
  Q: I have an old safe from my great-great grandfather made by the company referenced above. There is a ...
  A: Greg, I will have to see your safe to answer your questions, as there are no records available from ...
Opening a safe6/17/2011
  Q: I purchased a house two years ago which had been vacant for three years. Both of the owners died ...
  A: Lorna, You know the "I've got good news and I've got bad news!", well the only good news here is ...
new house-no combination for wall safe6/17/2011
  Q: Andy, My wife bought a house in October 09. We stubbled across a wall safe hidden behind a panel in ...
  A: Dirk I have included the info for Diplomat Safes for you to contact. They will need your serial ...
Protectall safe6/17/2011
  Q: A customer contacted us because he was unable to open his safe. He said he had the combination, but ...
  A: Yvonne, First the short answer - There was no common combination that these safes left the factory ...
key6/17/2011
  Q: I have an old Mosler key H074037 with a metal tag on it and a number 2311, could it be to a safe or ...
  A: Sue, I have no idea where this key would go. The Mosler safe deposit locks could also be used on ...
Protectall Safe6/16/2011
  Q: I have read your comments posted to questions about Protectall safes. Your information has been ...
  A: Joe, I'll see if I can answer a few of your questions. first off you haven't provided the safe ...
safe combination6/16/2011
  Q: i have a safe that was bought at an auction and the comb. was not with it safe number is r 3786 ...
  A: Victor, You didn't provide me with any information about the safe, which makes it difficult to ...
lost safe combination6/16/2011
  Q: We bought our home 25 years ago and with it came a small Schwab safe. I recently lost the paper with ...
  A: Cher, There is always hope! You basically have three options, they include: 1. Contacting Schwab ...
Remington Rand Safe cabinet6/16/2011
  Q: I want to scrap out this old safe that i know is wothless. First Qustion...The safe is locked, what ...
  A: Tony, First off, I do not give out opening instructions to anyone. This website is an open forum ...
Shaw Walker file safe6/15/2011
  Q: I purchased this safe for $17.50 at a family members auction because I thought it looked neat ...
  A: Joel, You are correct in assuming that these containers don't hold much value. They were basically ...
Value of Safe6/14/2011
  Q: I was wondering if you would be able to provide an approximate weight and value of this item. Any ...
  A: Mena, Sorry but the photo you provided doesn't give me any information to answer your questions. ...
Cole Steel Cabinet with combination safe6/14/2011
  Q: I have a Cole Steel office cabinet with a built-in safe that is locked closed, and the combination ...
  A: Matthew, I agree with you and think that the other person probably "lucked" into the combination. ...
Cole Steel Office Cabinet with Missing combination6/14/2011
  Q: Any chance we will be able to figure it out by ourselves since I know they are not particularly ...
  A: Jennifer, First off, I never recommend using locksmiths for any type of safe work. 30 years ago, ...
Diebold Safe6/13/2011
  Q: I recently came across an old Diebold safe that has the company's old (or first) logo that says, ...
  A: Jose, This isn't the companies first "logo"! Diebold began in 1859 as "Diebold-Bahmann Safe & ...
Sisco Safe6/13/2011
  Q: The key for my safe was bent inside the lock and to remove it the locksmith ruined the whole key ...
  A: Ina, I would have to see the lock to determine whether it is repairable or needs replacment. If ...
Vulcan Safe Company6/13/2011
  Q: My parents have a safe in their basement, 34"h, 24"w & 22"d, the safe is on wheels with approximate ...
  A: Gary, VULCAN SAFE & LOCK COMPANY This is one of those small companies that I will probably be ...
Armor Safe Co. floor safe6/13/2011
  Q: I recently acquired a building that has a mounted floor safe by Armor Safe Co. the serial number is ...
  A: Sharon, Their current name is "Armor Safe Technologies", you can find them at: ...
We (wife and I) locked the combination code paper in the safe!6/13/2011
  Q: Hope you can help! I have a 1910 Meilink safe with a mechanical spinner lock. Serial on handle # ...
  A: Erik, Well, I'm not going to have a lot of good news for you. Meilink was acquired by another ...
Sargent and Greenleaf 8400 problem6/12/2011
  Q: I have recently purchased a Victoria safe company (Location - Melbourne, Australia) safe as a ...
  A: Darrell, I'm not sure where you read that by flipping a safe upside down will assist in opening a ...
Saga Intl. Saf-d-posit model # 9106/11/2011
  Q: I am wondering as to the approximate value for my estate sale for the above model. Thank you in ...
  A: Cindy, Sorry to break the bad news, but these containers have little to no resale value, they are ...
Shaw Walker file cabinet6/10/2011
  Q: I have an old Shaw Walker fireproof file with 301A imprint on lock. Local locksmiths say that code ...
  A: Mike, Generally I never recommend using locksmiths for safe work as they don't have the training, ...
major floor safe6/10/2011
  Q: I had to have my major floor safe drilled. Now I can't seem to find a replacement lid. I realize ...
  A: Kit, First off I never recommend using locksmiths or safe technicians that cause so much damage ...
BARNES SAFE AND LOCK ON CAST ROLLERS6/9/2011
  Q: ANDY FIRST OF ALL THANK YOU, NICE MILITARY RECORD I'M EX-NAVY 77-83 IRANIAN HOSTAGE ...
  A: Ed, Being "Ex-Navy AND retired Army" makes it easy during the annual Army-Navy Game. I can pick ...
Diebold Cashguard6/9/2011
  Q: I have a Diebold Cashguard two level safe, each level is equipped with the KARA 6 digit keypad ...
  A: Ean, First off, the name is probably "KABA-MAS", not KARA. KABA-MAS has several different ...
steelmaster6/9/2011
  Q: we found an old steelmaster combination filing cabinet and we would like to use it ourself the ...
  A: Jamie, Sorry but manufactures never publish records of combinations for obvious liability and ...
Meilink Safe Opening6/8/2011
  Q: Can't seem to open the safe. Weird combination. Left 4X to a number then Right 3x to a number then ...
  A: Naomi, You are missing the final turn. The correct sequence is: 4 times left to the first number, ...
mcneal and urban safe6/8/2011
  Q: I bought an old 1887 house a few years ago and upon doing some remodeling i found a about 700 pound ...
  A: Nicolas, You have a couple of options, you can try all of the possible combinations or you can have ...
vintage floor safe6/8/2011
  Q: i have in my possession a s-cientist "b" safe. made in Marietta oh. my question is. i can take the ...
  A: Cheyenne, You need a special decoder ring to read the wheels. Just kidding! The short answer is ...
Meilink Safe wont open6/7/2011
  Q: I have an old Meilink combination dial safe that suddenly won't open. I've had it over 20 years and ...
  A: Doug, I doubt that it "suddenly" quit working. If you have a mechanical problem, then the problem ...
Gary Safe6/7/2011
  Q: I have a Gary safe that I got from my dad, that has a 5 number combination. I am unable to get it ...
  A: Greg, Gary Safe didn't make any models using 5 number combinations, what you have is a four wheel ...
Opening a Hermann Safe6/6/2011
  Q: My brother-in-law just passed away unexpectedly this past weekend, and he has a Hermann Safe (approx ...
  A: Gary, The Hermann safe company only made a few different types of safes, the majority of the safes ...
Chubb Mosler & Taylor safe6/6/2011
  Q: Good day, i see you are the most proficient with these old safes. I just had a jewellery store ...
  A: Hughie, I will need to see the safe to answer your questions. In order to answer questions, ...
Victor Safe6/5/2011
  Q: I just aquired a Victor safe. It is 33 inches tall, 22 wide and 24 deep. Printing on the door. it ...
  A: Tripp, These sequences were arrived at by locksmiths in the 1940's looking for that magic factory ...
Tower Safe Info Please6/3/2011
  Q: Grandpa's old safe has been around long as I can remember so I suspect it has to be at least from ...
  A: Howard, Well fate knows best, or maybe not :) As you have surmised, the "TOWER" name was simply a ...
safe combination6/3/2011
  Q: I have a saga International Safe deposit box with a combination lock as well as a key lock. The ...
  A: Bev, Sorry in advance, but you aren't going to be happy with the answer. The Saga Safes were made ...
Rotation6/2/2011
  Q: I have read your answers to lock rotation, but still confusing to me sorry. So I ahve a Tag on ...
  A: Drew, I'm very familiar with this safe as I used to have one myself several years ago. I turned my ...
Rotation6/2/2011
  Q: I have read your answers to lock rotation, but still confusing to me sorry. So I ahve a Tag on ...
  A: Drew, There have been hundreds of different styles of locks made by different manufacturers, and ...
Mosler safe questions6/1/2011
  Q: Andy, Thanks for your help. Please tell me what you can about this safe. The pictures are here: ...
  A: Steve, Lets see if I can't answer some of your questions. 1. First concerning the "age". If ...
schawb safe 19546/1/2011
  Q: I purchased at auction an old postal safe . with no combination. is there a way to get a combination ...
  A: Larry, In some case - yes, in most - no! The Schwab Safe Company was acquired by Sentry Group ...
old victor safe combination5/30/2011
  Q: I have acquired an old victor safe from my grandmother that passed away and it is full of valuables ...
  A: JD, You didn't answer the big question, "did one of the trial combinations work for you"? I'm not ...
Remington Rand abestos5/29/2011
  Q: I have 11 old Remington Rand file cabinets in my office and a locksmith told me the white powdery ...
  A: Grace, Follow up to my original answer. I found out that a home testing kit for asbestos is ...
Old Safe in the house we bought5/29/2011
  Q: I recently bought my home and the previous owners didn't want to take the old safe in the basement. ...
  A: Jessica, The original company was the "Burke & Barnes Safe Manufactures - 1845-1870. After Mr. ...
old victor safe combination5/28/2011
  Q: I have acquired an old victor safe from my grandmother that passed away and it is full of valuables ...
  A: JD, One thing that I really hate, is when people don't read the whole conversation, just the part ...
combination lock5/28/2011
  Q: I purchased a small filing cabinet on the left side with a small combination locker on the right, it ...
  A: Bill, I'm assuming that when you indicate a "locked position", you mean the door is shut and ...
Mosler Safe5/27/2011
  Q: I have a Mosler safe, serial# 282263. It's locked and I was seeing if you could help me? If you ...
  A: Manly, I do not give out opening or drilling instructions for obvious security and liability ...
file cabnet with combonation lock safe5/25/2011
  Q: My father gave me this 3 drawer locking file cabinet with a combination lock safe. the plate says, ...
  A: Patrick, As I stated previously - this is a discontinued lock, which means they don't make it any ...
Adesco Floor Safe Combination5/25/2011
  Q: Andy. I'm having trouble recalling the combination for my Adesco floor safe, but I recall that when ...
  A: Tony, The Ilco/Unican locks (obsolete now) use the following dialing sequence: 4 times left to the ...
Souther Cal Safe5/25/2011
  Q: Andy, Where around Orange County Ca. is a good place to buy an antique safe? I want to find ...
  A: Robert I would recommend that you check with Bob Stabley at Los Angles Safe & Vault. You can ...
Major Safe 17185/24/2011
  Q: My mother-in-law has a Major safe Model 1718. She cannot remember the combination turns, but we ...
  A: Marshall, The correct dialing sequence is: 4 times left to the first number, 3 times right to the ...
opening a locked mosler safe5/24/2011
  Q: I bought a home with a locked Mosler wall safe. It was probably installed in the late 50s or ...
  A: John, The dialing sequence "should" be: 4 times left to the first number, 3 times right to the ...
Safe value?5/23/2011
  Q: wondering if you might have an idea of this safes make/model/value? heard you are pretty good at ...
  A: Ron, The safe appears to be a Herring-Hall-Marvin, but I'll need much better photos to figure out ...
Mosler Bank vault5/23/2011
  Q: Terry, I own a former bank building on Miami Beach which has a fully functioning Mosler walk in ...
  A: Philip, Contact World Wide Safe & Vault at: WORLDWIDE SAFE & VAULT, INC 800-932-2278 3660 N.W. ...
Herring Hall Martin Safe5/22/2011
  Q: We have a Herring Hall Martin Safe by Yale in very good condition. We have the combination, but ...
  A: Katie, The safe may be a Herring-Hall-Marvin, but the lock is by Yale. Yale was a lock manufacture ...
Meilink G21 more info on combinations5/22/2011
  Q: I saw a couple of you other answers on possible combinations and I'm just looking for a little more ...
  A: Randall, The "G" series was designated for wall safes which were built prior to the 1960's. The ...
antique safe/yale BBO-4 gear lock5/22/2011
  Q: I acquired an antique safe that was locked shut. But had it opened by a professional and he said the ...
  A: Andy, I don't think that your "safe expert" knew what he was talking about. Most of these supposed ...
file cabnet with combonation lock safe5/21/2011
  Q: My father gave me this 3 drawer locking file cabinet with a combination lock safe. the plate says, ...
  A: Patrick, Sorry, but this locks have been discontinued for quite a few years. The only place to get ...
safe door5/21/2011
  Q: Do you know where I could buy, what I would call acorn's, they go on the top and bottom of hinge? I ...
  A: Kip, I do have a number of used ones, but no sets, and chances are they wouldn't match your ...
cary safe5/21/2011
  Q: I just got a double door cary safe with no combo with #129581 on the handles, I have called two safe ...
  A: Robbie, I'm going to be in the Healdsburg area tomorrow morning. If you would like me to work on ...
cary safe5/20/2011
  Q: I just got a double door cary safe with no combo with #129581 on the handles, I have called two safe ...
  A: Robbie, You have to provide me with a zipcode or city so that I can see who I know in your area. ...
cary safe5/19/2011
  Q: I have a cary safe and do not have the combo is it possible to open it. It has been in the family ...
  A: Jacques, Yes it is possible to open it, however, you only have two options, you can try all of the ...
Remington Rand 4-drawer file cabinet5/19/2011
  Q: I have an old Remington Rand 4-drawer file cabinet with a lock on the second drawer (from top). The ...
  A: Don, First a word of warning, then you can decide where to go with this cabinet. Remington-Rand ...
Chubb's Safe5/19/2011
  Q: I wanted to know if i want to sell this where should i and how much would it get me, I'm going ...
  A: Ziyus, I would be happy to evaluate your safe, however - any price or value that I would place on ...
Gun safe5/18/2011
  Q: Have an old cannon safe I just bought recently the person I bought it from gave me the to lock the ...
  A: Solomon, The biggest problem with getting a used safe is the combo is usually past on the way the ...
mosler safe5/18/2011
  Q: my aunt has a mosler safe,and has lost the combination to it.It is locked, is there any way to reset ...
  A: Corey, Lets think about this - if you could reset the combination, with the door locked, how safe ...
mosler safe5/17/2011
  Q: I can only find one number and it is on the brass handle. the number is 1478. is this a date? thanks
  A: Duane, Generally these are serial numbers. Mosler was in business from 1875-2001. I would need to ...
Adesco Floor Safe Combination5/16/2011
  Q: Andy. I'm having trouble recalling the combination for my Adesco floor safe, but I recall that when ...
  A: Tony, I'm not sure where you got these "rules", but they are bogus. The only rules that I have ...
cary safe5/16/2011
  Q: I just got a double door cary safe with no combo with #129581 on the handles, I have called two safe ...
  A: Robbie, The Cary Safe Company was in business from 1878 to 1929. During this time they used a ...
Lagard 3332 combination lock with change key5/16/2011
  Q: I bought a safe lock from e bay it’s the( Laggard 3332 combination lock with change key) I do not ...
  A: Norman, The class that I teach to locksmiths for basic safe servicing which includes combination ...
Diebold Dynamite Safe5/16/2011
  Q: I have a very old Diebold safe that has an interior Dynamite Safe inside of it that we do not have ...
  A: Jeff, The safe isn't a "dynamite" safe, it probably indicates that it is an "anti-dynamite". The ...
Gary Safe Co.5/15/2011
  Q: My grandpa has a big old Gary safe he is giving me. It says O.A. Bunning on the top and Buffalo, NY ...
  A: Chris, First off, it is a CARY safe, NOT a Gary safe. Cary manufactured safes from 1878 to 1929, ...
Remington Rand Safe Restoration5/15/2011
  Q: I have a Remington Rand Safe and wonder if they are worth restoring. It is a single door floor safe ...
  A: Jason, Remington-Rand started in the safe business in 1926 when they acquired the "Safe Cabinet ...
combanations5/15/2011
  Q: My friend has a victory safe and don't know the combination the safe is very old how can we get it ...
  A: Lowren, You basically have two options, you can try all of the possible combinations for the safe, ...
1871 diebold safe5/14/2011
  Q: I have a 1871 Diebold safe. It has been locked in my Dad's garage the past 40 years. I would like to ...
  A: Ed, you have quite a few good safe technicians nearby. Most of us are use to traveling fairly ...
Combination change5/14/2011
  Q: I have a Montgomery Wards safe model 9017. I have the combination and am able to open and lock the ...
  A: Montgomery Wards didn't make safes, they sold safes which had been relabeled with their logo. The ...
change combination5/13/2011
  Q: I have a CSS safe and I would like to change the combination. The current combination is ...
  A: Jim, Knowing the safe manufacture isn't as important as knowing the lock manufacturer, which would ...
Brinks Home security safe5/13/2011
  Q: I own a model 5059 and have lost the combination but do have the key. I am at a loss as to where to ...
  A: Denise, Sorry I took so long to answer, but I wanted to get you the latest contact info for this ...
safe5/12/2011
  Q: Was given a safe I is a Meilink on the turner are the #S-40171 with these patten #s on the back ...
  A: Lilly, Schwab Safes is currently owned and operated by "Sentry Safe". Their contact info is: ...
Mosler Safe5/11/2011
  Q: I have a Mosler Safe that i recently acquired.. of course the combination is not to be found. Can ...
  A: Ricky, I don't know of any really good safe techs in South Carolina. The nearest person that I ...
1871 diebold safe5/11/2011
  Q: I have a 1871 Diebold safe. It has been locked in my Dad's garage the past 40 years. I would like to ...
  A: Ed, You basically have two options, you can try all the 1,000,000 plus, possible combinations, or ...
amsec safe5/10/2011
  Q: i recently purchased a condo in las vegas that has a amsec floor safe in the bedroom closet... it ...
  A: Jody, We can have the factory do a record search for the original combination to see if that works. ...
Yale Safe5/9/2011
  Q: My uncle who is 86 yerars young has a Yale wall safe model B1 or BL. He can't remember the last time ...
  A: Scott, Yale is the lock manufacturer, not the safe manufacturer. The dialing sequence for most ...
Hotel safe5/9/2011
  Q: I have an older hotel safe the the batteries have died. It does not have a key back up but has a ...
  A: Chuck, I can get the battery back up that you are missing. I'll have to check on a price for it as ...
Sears safe5/9/2011
  Q: I have a customer that has an very old sears safe with federal equiptment co. carlisle penna on the ...
  A: Donald, Sears didn't make safes, they relabeld safes from a couple of different manufacturers. ...
safe door5/8/2011
  Q: Do you know where I could buy, what I would call acorn's, they go on the top and bottom of hinge? I ...
  A: Kip, While some safe companies do "salvage" the Acorns (or Finials), they generally don't have full ...
Sergent and Greenleaf safe lock5/8/2011
  Q: I have a safe with a Sergent and Greenleaf 4 wheel combination lock. It is about 100 years old. For ...
  A: Maria, a company that I use in your area is: Roadrunner Lock & Safe Company 520-326-5111 4444 E ...
Hall's Safe5/7/2011
  Q: I recently was given a Hall's safe with serial number beginning in 84 (847XX I believe). Overall it ...
  A: Kevin, The lock on this safe should be Hall's straight tail piece lock, and it should be fairly ...
Sergent and Greenleaf safe lock5/7/2011
  Q: I have a safe with a Sergent and Greenleaf 4 wheel combination lock. It is about 100 years old. For ...
  A: maria, I can't immagine why the lock would be destroyed, or replacement necessary, unless something ...
Bauche antique safe5/7/2011
  Q: i have just aquired an antique safe labeled "Coffres-Forts BAUCHE" with a key and four combination ...
  A: Dani I'll need more info or a photo of the lock to send you the resetting information. If you have ...
Safe with Combination Lock5/7/2011
  Q: I have a safe with a Sergent and Greenleaf 4 wheel combination lock. It is about 100 years old. For ...
  A: Maria, Chances are if your safe and lock are over 100 years old, replacement parts are going to be ...
Found a safe5/7/2011
  Q: We were cleaning out our mop room and found a concrete mounted drop safe under a steel plate. We've ...
  A: Charmian, The short answer is no! Chances are this company was a dealer, as I have no listing of ...
shaw walker safe 19165/6/2011
  Q: we have a 1916 safe in excellent condition with combo. Have been researching internet to find if ...
  A: Don, My first question concerns the 1916. Why do you believe the safe is from 1916? Secondly, ...
Bank vault door for sale5/6/2011
  Q: I have a Dibolt bank vault door and 700 safety deposit boxes for sale. Age about 12 yrs. Bank closed ...
  A: Dale, You would need to contact a local safe or vault company. In your area the nearest companies ...
Victor Safe5/5/2011
  Q: Good afternoon, I work at a museum in Meeteetse, Wyoming, specifically in the First National Bank ...
  A: Linda, Sorry there isn't a lot of info about this company available. As far as looking on line for ...
X 095/5/2011
  Q: We have a X 09 that we know the combination to but is rarely used. Few weeks ago we used it and we ...
  A: Shane, First off, thank you for your service. Unfortunately the X09 locks can be quite a pain in ...
safe5/5/2011
  Q: We 2 amsec dbl door safes in are establishment we have the combo for one but the other one has been ...
  A: Pat, IF the combinations have never been changed, and are STILL on the factory combinations, we can ...
Value of safe5/4/2011
  Q: I have the opportunity to purchase a Hermann safe. I don't know too much about it other than it is ...
  A: John, Your safe may NOT be an antique. Antique safes are considered over 100 years old, and based ...
Steelage5/3/2011
  Q: I have a 1985 floor safe. I'm not sure what co. made it. On the dial it has Sargent & Greenleaf Inc. ...
  A: Wilfredo, Steelage is the manufacturer. They were out of Delhi, India. I don't believe that they ...
stuck Royal safe5/2/2011
  Q: Combination hard to work but for the past month every hinges when it clicks the handle will not ...
  A: Bobbye, I would recommend that you get it serviced. If you are having a mechanical problem, it ...
Cary Safe5/2/2011
  Q: I have a Cary safe I inherited but have no combination. There is a serial number on the safe handle ...
  A: David, Sorry, but there is no such thing as a "master combination". Safes were set with an ...
key4/30/2011
  Q: I have a 4 drawer fireproof file cabinet by safe cabinet laboratory safe-file #21945 and wonering if ...
  A: Walt, Generally the locks on these fire resistive containers were made by Yale. Most large ...
wards 9041 safe4/30/2011
  Q: ..my zip code is 60089 !i appreciate your help........bob ANSWER: Bob, There are probably a number ...
  A: Bob, Most safe technicians travel quite a distance as part of their service. I cover Northern ...
wards 9041 safe4/30/2011
  Q: ..my zip code is 60089 !i appreciate your help........bob
  A: Bob, There are probably a number of safe technicians in your area that can help you, but I only ...
Saga Key Lost4/30/2011
  Q: I have a Saga SAF-D-Posit Model 1145. I have the combination but no key. On the outside of the ...
  A: David, You have two options, the first would include contacting the factory (good luck) to see if ...
wards 9041 safe4/29/2011
  Q: my wards 9041 safe dial feels like butter...no friction...sfa wont open without trying at least ten ...
  A: Bob, It would be called "maintenance". It doesn't matter how "smoothly" it feels, if something on ...
Kingavon Electronic Safe 284/28/2011
  Q: I have a kingavon electronic safe 28.I've lost the key & the battery is flat how do I get in ?Can I ...
  A: Bee, Kingavon is not a manufacturer, they are simply a "seller" of stuff. The safes are simply ...
history of safe4/28/2011
  Q: I have access to an old Victor Patent safe, and I have the serial number. Are there recored to show ...
  A: Gene, There are probably records buried "somewhere", but no one has ever published them. Victor ...
Lost combination4/28/2011
  Q: We got an Amsec BF1512 safe from a friend. He cant find the combination, but the door is open. Can ...
  A: Chuck, As long as the door is open, you can try to recover it, or have a safe technician reset the ...
GSA Approved Security Container - Mosler4/27/2011
  Q: Just moved into an office with a very heavy and huge GSA Safe. No one knows who owns the safe, ...
  A: Liza, Mosler safes ALL came with the same combination which was 50-25-50. This combination would ...
Victor 1888 no combo4/26/2011
  Q: I read a previous question and answer about a victor safe from 1888 with no combo. I have the same ...
  A: Bob, The caveat that I always include with the info about the Victor Safe combo possiblities, is ...
Star Safe - ST*T24/25/2011
  Q: Andy, we have aquired a Star Safe ST*T2, model 1145 -- 001444, from the ol lady's family. This safe ...
  A: Duck, NO HAMMERS! Chances are you are making a dialing error. On these smaller "STAR" fire ...
Meilink wall safe without combo.4/25/2011
  Q: My parents have a wall safe in their bedroom with no combo. They have lived in the house for about ...
  A: Kevin, Sorry for taking so long to get back to you, I've been on the road working. Meilink had 22 ...
Sisco safe 11904/25/2011
  Q: Tried to email sisco at the address you gave, it was returned undeliverable. Are they out of ...
  A: Dottie, I've heard nothing but problems about this company. They are still in business, They are ...
Unknown Safe Combination4/24/2011
  Q: Andy, I purchased a house that has a safe built into the brick chimney. As far as I know, the house ...
  A: Nate, I'm assuming the safe is locked up and you also have no combination? If it is you may not be ...
safe combination4/24/2011
  Q: andy I have a 70's star american ...
  A: Ray, As I mentioned earlier, the factory has lost all of the information for safes prior to serial ...
Bumil Safe opening4/23/2011
  Q: I have a 1996 Bumil SD109 safe. I have the key as well as the combo...Im just not sure how to open ...
  A: Matt, The key lock is a totally separate lock, so it doesn't matter whether you turn it before or ...
Bumil Safe opening4/23/2011
  Q: I have a 1996 Bumil SD109 safe. I have the key as well as the combo...Im just not sure how to open ...
  A: Matt, I don't remember off the top of my head, and I don't suppose you want to wait for two more ...
Unlocking Art Metal & Diebold File Cabinet Safe4/23/2011
  Q: I have an Art Metal insulated file cabinet safe and a Diebold Inc. insulated file cabinet safe. ...
  A: Dr. Drew, The dialing sequence should be: 4 times left to the first number, 3 times right to the ...
Combination for Open Safe4/22/2011
  Q: Andy, I much enjoyed your explanation of options to have locked safe opened. I have an old Hall's ...
  A: Willis, Of course. If the safe is open, the combination is fairly easy for a trained safe ...
Montgomery wards safe #90424/21/2011
  Q: Purchased a home with a Montgomery Wards safe #9042 by Meilink. The previous owner gave us the ...
  A: J. generally these Meilink safes dialed as follows: 4 times left to the first number, 3 times ...
Old Vault Door4/21/2011
  Q: I am sorry this is not a question but it is an item of interest. Kindly please have a look, you may ...
  A: Oliver, Great pictures of these two vault doors. I'll keep it in mind as we do get several ...
Sargent & GreenLeaf Safe Lock4/20/2011
  Q: I recently bought a house and there is a safe in the basement. The door is open but i don't know ...
  A: Corey, This safe appears to be a light weight fire resistive safe from the 1930's (1920s-1940's). ...
MEILINK WALL SAFE4/20/2011
  Q: We have a Meilink wall safe with a dial combo. On the dial it looks like it says "LORI" LC 1220. ...
  A: Vickie, Yes that does make a huge difference. It will be very easy for a safe tech to recover or ...
safe cabinet4/19/2011
  Q: i have an safe cabinet labled S.CIENTEST B SAFE CABINET CO. MARIETTA OHIO.interested in value and ...
  A: Russel, If you don't have a combination to your safe, and if it is locked up, then you have two ...
MEILINK WALL SAFE4/19/2011
  Q: We have a Meilink wall safe with a dial combo. On the dial it looks like it says "LORI" LC 1220. ...
  A: Vickie, The Meilink Safe Company was acquired by FireKing International several years ago. They ...
Locked Safe4/19/2011
  Q: I have a safe vault which manufacturer is diplomat model A125Ek serial no. E08033516, i have ...
  A: Garry, I believe that you have to have the door open to reset the code. If you have lost the code ...
Diebold T-20 Safe Combo Dial4/18/2011
  Q: Read your blog regarding a plastic replacement dial for a Diebold Safe. I have the same problem ...
  A: Steve, I'm not sure what you read, but as Diebold has made safes, locks and parts for around 135 ...
Small 1912 Meilink safe4/18/2011
  Q: The door is open and I have removed the plate that covers the lock. Unlike a previous question you ...
  A: Ralph, I will have to see your safe to see what you are talking about, and so that we are talking ...
old cary safe lost combo4/18/2011
  Q: I inherited a old cary safe from my father but we can not find a combo anywhere .can you help the ...
  A: Lenny, This manufacturer has been out of business since 1929, so any records are long since gone. ...
Victor (large bank?) safe4/17/2011
  Q: I own the following safe and wanted to get additional information about it including desirability ...
  A: Ron, Without even looking at your safe I can tell you that it is NOT a bank safe with a "T-20" ...
Floor Safe4/16/2011
  Q: The safe is about 40 cm by 25 cm the box and has a round opening in it, I tried to google the ...
  A: Simon, As the safe is open, do not place it in the opening and lock it! I will need to see photos ...
Silas C. Herring Safe4/14/2011
  Q: I inherited a safe that sounds almost identical to the one described in an earlier question. It is ...
  A: Gid, Yes it does matter which way the key goes in. But it isn't based on the size of the prongs, ...
Kingavon safe 254/14/2011
  Q: batteries died ,opened safe with key,replaced batteries but cant remember how to set the code
  A: Bob, Kingavon was simply a supplier of "stuff", the safes were labeled for them, not manufacturered ...
I can open safe4/14/2011
  Q: Do you have any suggestions on how to open it? I will send you pictures in the morning Thank you ...
  A: Carlos, If you don't have the combination and the unit is locked closed, then your options are ...
Murphy FireKing Cabinet4/14/2011
  Q: Andy, I am acquiring a Murphy FileKing Insulated Cabinet in a few days. I am trying to find any ...
  A: Sam, Sorry, but I only have information on safes, not file cabinets, which is basically what this ...
Shaw walker4/13/2011
  Q: I regularly have to have a locksmith come in and change my safe combo, could you please guide me ...
  A: Will, Shaw Walker never manufactured locks, so I'll need more info on the lock that you have to see ...
opening lower drawer4/11/2011
  Q: We have a Diebold safe that we inherited. We have the combination and can open the top drawer, but ...
  A: Linda, If it has drawers then it is a cabinet, not a safe, even if it has a combination lock. If ...
diebold safe4/11/2011
  Q: I have a 2 drawer (square)diebold safe that I am having problems with opening the bottom drawer. I ...
  A: Jena, Generally mechanical problems like this require hands on diagnostics and solutions. The ...
cant open the safe4/11/2011
  Q: J.Taylor safe I do have the 3 number combination,tried a bunch of times,wont open.The dial starts at ...
  A: Charlie, Generally moving the safe, and/or laying it on its back won't hurt the lock or change its ...
old safe4/11/2011
  Q: My mom has an old sentry safe the no. on it is A828524. She is wondering how to reset the ...
  A: Rebecca, Sorry, but Sentry safes have no value. They are basically inexpensive personal document ...
cant open the safe4/11/2011
  Q: J.Taylor safe I do have the 3 number combination,tried a bunch of times,wont open.The dial starts at ...
  A: Charlie, The lock is probably a Sargent & Greenleaf 6810 style lock. Earlier versions were the C62 ...
opening my safe with key but without combination4/11/2011
  Q: I had recently emailed regarding opening my Saga Saf-D-Posit Safe Model 1190. I have the key but ...
  A: Ramona, Answering your question concerning "how he did it by simply drilling a hole". Let me say ...
wards safe4/9/2011
  Q: have wards safe aprox 1978 model 9001 ser # 72-101789 sent to sentry safe with nortized letter they ...
  A: Jerry, Based on the serial number, the safe is probably a Meilink. But you are going to run into ...
Trouble with combo lock4/9/2011
  Q: I have a pre Diebold. Herring-hall-marvin save that has a seargant and greenleaf combo lock. I was ...
  A: Jeremy, As Herring-Hall-Marvin has been out of business basically since their acquistion by Diebold ...
Amsec ESL10 Floor Safe won't open4/8/2011
  Q: I can't open the floor safe door. I think it might have too many things packed into it and maybe ...
  A: Mariano, If you can hear the lock "clicking", it is trying to unlock. Your batteries may be too ...
estimated weight of dominion safe model 7484/8/2011
  Q: I would like to know the weight of dominion safe model 748, Thanks
  A: Svet, As model numbers change from year to year and manufacturers come and go, no one bothers to ...
not safe related4/8/2011
  Q: I've been trying to get a question about a knife answered, and the repeated response that I am ...
  A: Terry, I was able to do quite a bit of research in a short period of time just using the "Anton ...
MEILINK4/8/2011
  Q: Andy, The attached image if from one of your posts. This is exactly what my safe looks like inside. ...
  A: Matt, Send me the photo of what you are referring to, as I'm clueless right now. It always helps ...
MEILINK4/7/2011
  Q: Andy, The attached image if from one of your posts. This is exactly what my safe looks like inside. ...
  A: Matt, I never recommend an owner disassembling the lock and cleaning or lubricating it. However I ...
York insulated record container4/7/2011
  Q: We have 2 York filing cabinets that need keys (lost) The s/n are M-029352 & M-029353 The tumbler #s ...
  A: Mike, You aren't going to get "replacement" keys, you will have to have a locksmith either fit keys ...
Star Safe C64/7/2011
  Q: Andy, I have a Star Safe with model number C6 in my home. Would you be able to tell me the order ...
  A: Roman, The dialing sequence for the Star "C" round door safes is: 4 times Left to the first ...
Star Safe Mfg. Co. #C-64/6/2011
  Q: I have a Star Safe model #C-6 floor safe with the combination but am still unable to open. Sold ...
  A: Jennifer, The three main reasons that a safe lock will not open are: 1. Incorrect dialing ...
Art Metal Safe4/6/2011
  Q: We have a double door Art Metal safe measuring 45" wide, 33.5" deep, and 83.25" high (depth includes ...
  A: Ralph, The weight is probably around 1200 to 1500 lbs. Note: The "T-20 burglary rating" was for ...
safe technician4/6/2011
  Q: We received a donation of a safe with markings on bottom left and right feet - looks like "MERRING'S ...
  A: Diana, The safe would actually be a "Herring & Farrel", built between 1869 to the late 1880's. I ...
Safe won't lock4/5/2011
  Q: I have an American Security floor safe (about 12X15) which is about 4 years old. The top is flush ...
  A: Bob, If the lock and bolt work operate correctly with the door open, then they are NOT the problem. ...
herring-hall-marvin strong box4/5/2011
  Q: any information you could provide on this item would be appreciated
  A: Kari, While these boxes could have been used by anyone at the time, they were generally used by the ...
Shaw Walker file cabinet with S&G lock4/5/2011
  Q: We have a customer with a Shaw Walker fire proof file cabinet with an S&G lock. We have made a ...
  A: Jessica, The current parent corporation for Shaw Walker is the "Smead Manufacturing Company". You ...
Old Chubb safe4/5/2011
  Q: I have recently bought an old chubb safe and would like to find out a bit more about it. It is a ...
  A: Gary, My specialty is antique US safes. In order to answer your question I would need to see this ...
Hall's safe4/4/2011
  Q: We have a safe that is locked with no combo. All the locksmiths that I have called do not do this or ...
  A: Jeannie, Yes we cover the northbay. I had one of my techs at the Sterling Winery in Calistoga last ...
Saga saf-d-posit #11454/4/2011
  Q: Terry My name is Rico and, I came found this safe and was wondering what is your charge for ...
  A: Rico, Saga Safes were imports, and I'm not aware of anyone that has a data base of the original ...
Cary Safe4/4/2011
  Q: I have a Cary Safe. It reads "Cary Safe Co. Patented Sept 16th 1890 Baffalo, NY." on the dial. On ...
  A: Jerrid, I would be glad to give you any info that I can, but I'll need to see your safe to answer ...
Mosler Safe4/3/2011
  Q: Bought a 1948 Mosler Safe (9287 124 on back of safe and on top of lock) at auction with no ...
  A: Buddy, I'm sorry that you see common sense facts as RUDE! This was not my intention, and I'm not ...
Mosler fire rated file cabinet4/2/2011
  Q: I have a Mosler file cabinet,it has a butterfly knob w/ key but no combo lock on door. It has 3file ...
  A: Bob, I'm not sure what info that you want to give your friend, other than "it is a filing cabinet"! ...
US Postal Combination Safe4/1/2011
  Q: My husband & I bought an old US Postal safe years ago. The problem is, when we bought it, the safe ...
  A: Samantha, You basically have two options to get the safe open. first you can try dialing all of ...
Sisco safe Model 10604/1/2011
  Q: My in-laws have never used their safe. They have a key, but lost the paperwork shipped with the ...
  A: Dean, IF you can get hold of the manufacturer, and IF they will give it to you. Manufacturers ...
Cary Safe help4/1/2011
  Q: The door is open; the combination reads R-79/L-81-2/R-30/L-0. We tried four turns to the right, ...
  A: Jack, The dialing sequence for your lock will depend on "WHAT" lock you have installed. Cary used ...
Sisco Protector Safes4/1/2011
  Q: Can combination be obtained by serial number....if the customer has the key?
  A: Wesley, IF you can get hold of the manufacturer, and IF they will give it to you. Manufacturers ...
cannon safe4/1/2011
  Q: I have a cannon safe since 2004. It was working fine . Now it will not open.It has a securam ...
  A: A. Majhail Electronic locks, like ALL electronic devices are subject to failure, at a higher rate ...
Can't open Floor safe with S&G dial.3/31/2011
  Q: I am hoping you can help me. My father purchased a floor safe back in the early 70s and installed ...
  A: Milo, I'm sorry to hear about your dad, but age and associated problems happens to all of us, and ...
Armor Safe combination3/30/2011
  Q: I bought an Armor Safe from an auction about 2 years ago and am finally ready to use it. It is huge ...
  A: Buddy, No the serial numbers are for warranty purposes. The codes that I gave you ARE the factory ...
old safe3/30/2011
  Q: I have an very old safe that I bought. It says Challenger and is a combo safe. The number 3262 are ...
  A: Jackie, If you could simply "remove something" to open the safe, they wouldn't be very safe would ...
Molser Safe Model 123/29/2011
  Q: I am currently consolidating buildings and have a Mosler safe manufactured in 1970 serial number ...
  A: Chris, I recommend that you have a safe technician recover and/or reset your safe lock to avoid ...
Diebold safe3/29/2011
  Q: I'm not sure you will remember me, but I had the safe that the plastic dial "melted", for lack of a ...
  A: Al, The combination that is set on the lock was referenced by the position of the lock and the dial ...
Dexter Safe Company3/29/2011
  Q: I have an old safe that I just bought from a late friend's estate. It sounds very similar to one ...
  A: Danny, Dexter was a lock manufacturer, his locks were used by a couple of safe companies including ...
cannot open Montgomery ward 9031 safe3/28/2011
  Q: montgomery ward 9031 safe w/ combo only(no key). I have not opened this safe for 10 years. I have ...
  A: Tim, The three main reasons a safe lock won't open are: 1. Incorrect dialing sequence, 2. ...
Old Schwab safe3/28/2011
  Q: I have an old Schwab safe that was in a store that I purchased a few years ago. I have opened it in ...
  A: Mark, Unfortunately, serial numbers don't mean anything to anyone accept the factory. They are ...
Art Metal - Safe #24,7683/28/2011
  Q: Our church has an old safe that was given to the church. It was a good idea at first but now has ...
  A: Melissa, Serial numbers are only helpful to the manufacturer, IF they are still in business. There ...
saga safe3/27/2011
  Q: I dad left a Saga safe with the combination, but I still cannot open it. It has four numbers to the ...
  A: Stan, there are three reasons that safe locks don't open, they are: 1. incorrect dialing sequence, ...
Victor safe described in earlier post3/26/2011
  Q: Please refer to your earlier question from Janis dated 3/7/2009. Link: ...
  A: William, The serial number AND info on the "Safe Manuacturers National Assoc." label, only apply to ...
safe combination3/26/2011
  Q: I have an old safe with a yale & towne combination lock. The safe is cast iron rounded corner with ...
  A: Mike, I don't recall receiving any photos from you or of this door. What name / email did you send ...
Globe-Wernicke combo3/26/2011
  Q: I have a safe from my Grandfather, the door is locked but is open. How can I recover the combo or ...
  A: Jeff, Most of the "Globe" safes used hand change Yale locks. I'll have to see which one you have ...
Victor safe described in earlier post3/26/2011
  Q: Please refer to your earlier question from Janis dated 3/7/2009. Link: ...
  A: William, First off, Victor safe went out of business in 1955, so nothing that was ever made by them ...
Change combination Mosler Container Lock3/25/2011
  Q: I am located in Germany and have a customer with a open Mosler Army-Save. I need Information or a ...
  A: Thorsten, This isn't an authorized lock for this container. If your customer is US DOD, Military ...
star safe model #E-73/25/2011
  Q: may i please enquire as to the dialing sequence of this model. star safe model# e-7 thank-you ...
  A: D. Doxie, These Star safes (round door) used a proprietary, manipulation resistive lock. The ...
need safe sequence3/25/2011
  Q: I have a Morris Ireland safe with combo #s but do not know the sequencing. Could you shed some ...
  A: Ron, I understand, but it doesn't change anything in my first email. I still need to ID the safe ...
old postal service safe3/24/2011
  Q: I inherited an old safe from a friend that passed away. I dont know for sure if its a us postal ...
  A: Shane, The post office used anything and everything, so just because it says "property of", doesn't ...
Acme safe3/24/2011
  Q: Andy, I wrote to you about a month or two ago regarding my old safe. I have been slowly removing ...
  A: Rob, I'm glad that you found that Acme Safe is still in business, and has been since around 1904. ...
Shaw Walker Four Drawer File Cabinet3/23/2011
  Q: How can I tell if this is fireproof or not?
  A: Jenet, First off, there is no such thing as "Fire Proof"! If the container is fire resistive, it ...
safe3/23/2011
  Q: Is there any way to tell if an old sentry safe has a 3 or 4 number combination. Having trouble ...
  A: Chris, Please read the previous message in its entirety. There are 3 wheels in your lock that ...
need safe sequence3/22/2011
  Q: I have a Morris Ireland safe with combo #s but do not know the sequencing. Could you shed some ...
  A: Ron, It depends on what you have. While there was a "Morris & Ireland" manufacturer, there was ...
Gardall Sargent and Greenleaf3/22/2011
  Q: Hey Andy, My cousin and I were cleaning our grandfather's garage after he passed away and found a ...
  A: Jason, You can try the following: Precision Lock & Safe (Elaad Israeli) 516-616-0854 240 Jericho ...
X 093/22/2011
  Q: Do you know where a person could take certified a X 09 class in the Western US in the near future? ...
  A: Scott, Unless you find one of the lock or safe associations that is offering the class, the only ...
1871 Diebold dial safe made in canton ohio3/22/2011
  Q: I have 6 numbers for the combination for the safe But can't seem to open it. I have tried the left, ...
  A: Scott, yes you probably have tooooo many numbers! Your safe lock will either have a 3 or 4 wheel ...
Sargent and Greenleaf combo3/22/2011
  Q: Andy, Did any of the sargent and greenleaf locks, Group 2 mech. Did any S&G locks in history start ...
  A: Gary, S&G made a number of locks that started out dialing to the right. Most of these were 4 wheel ...
Diebold model 20-633/21/2011
  Q: I work at Anniston Army Depot as a Locksmith. I've ran into a Diebold file safe model 20-63. All of ...
  A: Jim, Generally, mechanical problems like this cannot be diagnosed through emails, it has to be done ...
Gardall Sargent and Greenleaf3/21/2011
  Q: Hey Andy, My cousin and I were cleaning our grandfather's garage after he passed away and found a ...
  A: jason, While you can contact Gardall to see if they have the original combination, your best bet ...
Meilink Safe......3/21/2011
  Q: I understand that you can not give away safe secrets but, What can you tell me about a (brown) ...
  A: Frank, Meilink used several different types of locks, all of them have three wheels and the dialing ...
resetting or identifing mosler safe cobination3/20/2011
  Q: I have old mosler safe that i need a combination for. The door is open and i have included photos of ...
  A: Al, This is what is known as a "hand changeable" wheel curb. It doesn't take any special tools ...
SQM3/18/2011
  Q: I think the batteries in the safe have died, My husband has NEVER replacced them. AWe cant find the ...
  A: Janet, These "inexpensive" safes (and I use that word tongue in cheek), were not meant for home ...
Montgomery Ward safe3/18/2011
  Q: when my dad passed away 4 years ago, my siblings passed on his Montgomery ward safe so i took it. I ...
  A: Darrell The safe was manufactured by Meilink around 1980. This company is now owned by FireKing ...
Mosler Safe3/16/2011
  Q: I have a Mosler safe that has been in my family for many years. I cannot get it open and do not ...
  A: Ted, I'll give you a couple of safe techs that I would recommend in your area. Some of them may be ...
meilink safe3/16/2011
  Q: I have a single door Meilink safe with 4 numbers.It was given to me by my father-in-law who bought ...
  A: Terry, There are only three reasons that a safe lock will not open: 1. Incorrect dialing sequence, ...
old diebold safe unknow combination3/16/2011
  Q: i have an old diebold safe that i bought off a friend and he had no clue of the combination. there ...
  A: Spencer, The majority of the safes similar to yours, shipped by Diebold were set on a standard ...
Shaw-Walker safe, closed doors and locked3/15/2011
  Q: I have a Shaw-walker safe that is closed and locked, I was wondering if it could be opened and used ...
  A: Joe, The Shaw Walker Company was in business from 1903 to 1990 when it was acquired by The Smead ...
weight of home safe3/15/2011
  Q: I have a Montgomery Ward Home safe 9042, model 88-8830. I need to move it and I would like to know ...
  A: Tom, You can contact Meilink with the serial number 88-8830, and they should be able to tell you ...
weight of home safe3/15/2011
  Q: I have a Montgomery Ward Home safe 9042, model 88-8830. I need to move it and I would like to know ...
  A: Tom, Montgomery Wards, didn't manufacture safes, Safes were made for them by several different ...
STAR opening sequence3/15/2011
  Q: I bought a house about 5 years ago with a Star in floor safe in the basement floor. The previous ...
  A: Jeff, Your instructions are "almost correct"! The sequence is: 4 times left to the first number, ...
Sentry safe electronic lock3/14/2011
  Q: I have had problems with true safe unlocking when combo entered. Hear this is common and would like ...
  A: John, The first problem you have is with the safe. When you purchase inexpensive equipment, you ...
Old Eagle safe3/14/2011
  Q: I am wondering if you know of where I can find pictures of the back side of an old Eagle combination ...
  A: Chris, We do not give out or publish any material that will compromise, or provide info to use in ...
Cary Safe3/14/2011
  Q: I acquired a Cary Safe from an old printing shop and I don't have the combination for it. I have ...
  A: Shane, Yes I do, contact a safe technician, not a locksmith. One of the reasons that I NEVER ...
J Baum Safe3/14/2011
  Q: I just aquired this small safe. The ser# is 82651 on the handle. I am interested in opening this ...
  A: Ron, There are no "factory TRIAL combinations". Manufacturers NEVER, EVER, EVER released this type ...
sperry rand victor fire master LX four drawer file cabinet3/13/2011
  Q: I had my cabinet open when my son started talking to me. I closed it, but now can't get it open. ...
  A: Lisa, Chances are the drawer simply isn't closed all the way. If one of the drawers is partially ...
Excalibur safe3/13/2011
  Q: I bought a house that have a gun safe in it. It is open but I don't have the combination or the key ...
  A: Mohamed, If the safe is open, you only need to have a safe tech from a local safe company reset the ...
File Safe Combination3/13/2011
  Q: I have an old Remington Rand 4 drawer file safe but forgot the combination. It is currently ...
  A: Henry, The nearest companies that I use in Arizona are: Interstate Lock & Safe 480-964-9092 16223 ...
File Safe Combination3/12/2011
  Q: I have an old Remington Rand 4 drawer file safe but forgot the combination. It is currently ...
  A: Henry, First off, I NEVER recommend owners work on their safe locks for the same reason that I ...
fireproof rate3/12/2011
  Q: HI ANDY I AM GOING TO LOOK AT A USED GARY TL-15 SAFE OUTSIDE 32" HIGH 24" DEEP 30"WIDE APROX WT ...
  A: Michael, If the safe does not have a UL label for fire resistance, then it isn't fire resistive. ...
Meilink double door safe3/12/2011
  Q: I purchased a double door safe,but the original owner has Alzheimer and son didn't know ...
  A: Tim, The reel is called a "Wheel Pack" or "Curb". If the lock has a removeable curb, then it is ...
J Baum Safe3/12/2011
  Q: I just aquired this small safe. The ser# is 82651 on the handle. I am interested in opening this ...
  A: Ron, sorry but you are incorrect with the RLR and LRL sequence, and with your assumptions on the ...
Mosler MDL 11 Postal safe3/11/2011
  Q: I just purchased a Mosler safe which was a post office safe Manufactured in 1965 #17589-2. It is ...
  A: Robert, While this safe may have been owned by the Post Office, it wasn't a "post office safe". ...
unable to open excalibul3/11/2011
  Q: My zip code is 77076 Houston tx I can't open the lock is there a number where i can call to get help ...
  A: Sara, I have a couple of questions: 1. Do you have the combination for the safe? Do you just ...
Mosler Safe3/8/2011
  Q: My company has a Mosler safe in their office area that has not been opened since the business began ...
  A: Echo, If it is a "walk in", then it isn't a safe, it is a vault. Serial numbers only work for two ...
Herman Safe3/7/2011
  Q: The back of the combination lock ( on the inside of the safe) had been removed prior to my ...
  A: Jay, 12 million dollars, and you can send the check to me! just kidding. First off I need to know ...
Victor Safe and Lock3/7/2011
  Q: I have a Victor Safe and Lock floor safe, received as a family heirloom. Any idea how much it ...
  A: Bob, Umm - one pound 298? Sorry, but I only worked at the carnival for one day. They let me go ...
safe combination3/7/2011
  Q: We have a safe that my mother used to own and had lost the combination years ago. We would like to ...
  A: Sonja, The safe is actually a Meilink safe. Meilink was acquired by the FireKing Security Group in ...
1922 herring hall marvin safe3/7/2011
  Q: i have a 1922 herring-hall-marvin safe i was woundering what they are going for in the market today. ...
  A: Loren, My first question is why do you believe that the safe was manufactured in 1922? Do you have ...
Safe Locked3/6/2011
  Q: I have a Saga saf-D-Posit Model#1145. The safe was always locked with a key and I was asked not to ...
  A: Paul, Well at a minimum, at least you aren't locked out, which would have cost you $350 or more to ...
safe combination3/5/2011
  Q: I have an old safe with a yale & towne combination lock. The safe is cast iron rounded corner with ...
  A: Mike, You haven't given me nearly as much information as you think that you have. Yale made many ...
Safe3/5/2011
  Q: Terry, I have a Vanguard 1.5 Safe. I have lost the combination. I have called a local locksmith and ...
  A: Clay, I never recommend using locksmiths for safe work, just like I don't recommend using a safe ...
Chubb-Mosler-Taylor Safe weight3/4/2011
  Q: I have an opportunity to pick up a used safe from a jewellery store that is going out of business. ...
  A: Terry, It's not that I'm "down" on locksmiths, unfortunately most of them don't know their ...
Chubb-Mosler-Taylor Safe weight3/4/2011
  Q: I have an opportunity to pick up a used safe from a jewellery store that is going out of business. ...
  A: Terry, Without examining it I couldn't answer yes or no. It would depend on the installers. The ...
Chubb-Mosler-Taylor Safe weight3/4/2011
  Q: I have an opportunity to pick up a used safe from a jewellery store that is going out of business. ...
  A: Terry, The safe appears to be a composite style safe. If so, you are probably looking at around ...
major safe3/3/2011
  Q: Major safe, model 3016. I would like to sell the safe and would like to know its age and appx ...
  A: Jack, As all of the records for Major safes, prior to serial number 370940 were lost in a fire, ...
Mosler Safe3/3/2011
  Q: We have an old Mosler safe #271539 that we can not open.Any help would be appreciated. Thank You
  A: Richard, There are only three reasons a safe lock will not open: 1. Incorrect dialing sequence, 2. ...
old safe3/3/2011
  Q: i have an old safe that reades herring martin marvin safe co hamilton ohio, I have only seen HHM ...
  A: William, I'll have to see what you have to accurately ID it for you. In order to answer questions, ...
4 drawer Victor Firemaster3/2/2011
  Q: Andy, I found this forum after searching the web and finding this post which you have answered. ...
  A: Brian, Unfortunately the locking mechanism is controled by the drawer with the lock. As long as ...
factory code3/2/2011
  Q: i bought electronic safe bs-t370..it has electric lock of booil company...i have forgotten ...
  A: Muqi, You will have to contact the factory to see if they have a "master password" to open your ...
star safe will not open3/2/2011
  Q: I have star safes at my car washes. One of them will not open with the combo. The dial became hard ...
  A: Darren, I and the manufacturers, recommend "annual maintenance" for safes used in commercial ...
factory code3/1/2011
  Q: i bought electronic safe bs-t370..it has electric lock of booil company...i have forgotten ...
  A: Muqi, The "factory code" was the one that came with the safe. As soon as you changed it, it was ...
Yale Monitor Safe3/1/2011
  Q: I live in Denver do you know any company here that can open it? Thanks Van
  A: Van, Yale was a lock manufacturer, not a safe manufacturer. Monitor was also not a manufacturer, ...
safe comb.2/28/2011
  Q: I have a Hall's Safe & lock safe I got from my brother, No combination but door is open took back ...
  A: Alan, There should be a small "square" hole in the back of the lock curb. Originally there would ...
Safe Service Manuals2/28/2011
  Q: Good day! I have an old safe, Scwab Safe Co. A-440879, SMNA SPECF2-ND Y3729. It is a two door ...
  A: Frank, Manufacturers don't publish "service manuals". The "specs" you are referencing have nothing ...
Hamilton 4drawer GSA2/28/2011
  Q: I have a hamilton four drawer GSA container that has one locking drawer. can I make the other ...
  A: Rob, The simple answer is "NO"! There are no modifications authorized to GSA containers. If you ...
1968 Mosler jewelry-type safe2/28/2011
  Q: We have a 1968 Mosler safe, serial # 19828-A for the inner safe, with outer safe 19828-4 in a Sears ...
  A: Phyllis, The rule is: If the safe isn't working correctly - Don't close and lock it. If the wheel ...
Mosler safe records2/28/2011
  Q: I bought a Mosler safe about 30 years ago from a trading post in New Mexico. The owner had the ...
  A: Richard, Good luck trying to find the records. If you find them, send me a copy. Generally safe ...
Old Diebold safe from a Detroit Edison office2/27/2011
  Q: The safe looks to be made of cast steel,not a real smooth surface.It was made by Diebold and the tag ...
  A: Hal, I would be happy to look at your safe. One note though, as your safe has an SMNA rating ...
Really Big and Old Safe2/27/2011
  Q: My family has recently moved into a house that had a giant combination safe from like the 50s (not ...
  A: Cole, Congratulations on getting it open, even if it was an accident. You probably saved yourself ...
ES-035 Safe2/26/2011
  Q: I have a ES-035 safe the battery is dead & i have lost the booster battery is there anyway of ...
  A: Mark, Eagle Safes are made in Korea. The manufacturers generally don't deal directly with the ...
Fichet-Bauche Carena old version safe2/25/2011
  Q: I'm cannot check the model of the safe I have, it's dark-blue, bought in early 90s, looks like ...
  A: Hadi, If there was such a thing as a "common" combination, safes wouldn't be very safe. Mechanical ...
set screw on antique mortis lock2/25/2011
  Q: This is what my set screw looks like.
  A: Teemu, What is your question? If you are looking for replacements, you won't find any. A screw ...
GSA container lubricant2/24/2011
  Q: Diebold GSA (4 and 5 drawer) Class 6 containers needs to have the drawer sliding rails lubricated. ...
  A: Laura, Any type of bearing grease will work, not light oils, or spray on lubricants. When ...
E.C. Morris & company safe2/24/2011
  Q: C.Morris & co. safe goes for? I have the combination and the key. I have pictures inside and out. ...
  A: Linda, I would be happy to look at your safe, and answer any questions that you have about it. In ...
cole steel filing cabinet2/24/2011
  Q: I have a cole steel filing cabinet with a small safe inside. I have the combination but I'm not able ...
  A: Haydee, As I originally indicated, the dialing sequence is for three numbers (see below). The ...
Found Antique Safe2/24/2011
  Q: I work as a realtor in Baltimore and have been noticing old safes in abandoned homes that are listed ...
  A: Dave, The $75 won't be a bad investment. Unfortunately, cell phone pics probably won't let me see ...
Diebold Safe door guts2/24/2011
  Q: I am trying to restore a Diebold safe door for an nonprofit organization. I have figured out the ...
  A: Jeff, The short answer is NO! Manufactures NEVER publish schematics for obvious security and ...
approx:1964 eagle safe2/24/2011
  Q: it sat and now i need it and can't seem to open it. so if you could explain the sequence , i mean ...
  A: John, There are only three reasons a safe lock will not operate or open: 1. Incorrect dialing ...
Steelmaster Filing cabinet2/24/2011
  Q: I have a Steelmaster filing cabinet with a combination lock on it that i bought at goodwill the ...
  A: Seth, These locks haven't been made in at least 30 years. If you do find a lock, it has been ...
Steelmaster combination lock2/23/2011
  Q: Is it possible to get a lock combination for an old Allsteel cabinet? I don't know the year of ...
  A: Jan, Manufacturers never released or published combination lists for their products for obvious ...
Hall's Safe and Lock Company2/23/2011
  Q: We have a Hall's Safe in our museum that we would love to more about. The serial # on the door is ...
  A: Marty, If you want individual knowledge about your particular safe, I won't be able to help you as ...
Montgomery ward 90072/23/2011
  Q: I have the combination of the Montgomery ward 9007 safe but how should the dial be turned and how ...
  A: Larry, It really depends on the actual manufacture of the safe. Montgomery Wards purchased safes ...
Older Diebold Safe2/22/2011
  Q: I am looking for service on an older 23003 TRTL30X6 safe. This thing seems to be from the Late ...
  A: Rick, I'll start with your last comment first. "I also have been told to maybe remove the glass ...
Old Field Safe2/22/2011
  Q: My husband & I found an old military field safe in an old barn a few years ago & were wondering if ...
  A: Sherry, You don't have an antique (over 100 years old), but you do have a collectible. As far as ...
Combination Lost2/21/2011
  Q: Sirs, I have a Vanguard VS-200 safe which I bought from Sears several years ago. I no longer have ...
  A: Allen, The safes that Sears sold were pre-packaged before they were shipped to either the retail ...
S&G Biometric Lock2/20/2011
  Q: Goodafternoon Terry, I have just finished reading some of your comments on the above mentioned ...
  A: Wayne, If you have an S&G lock, the batteries are on the outside. If you have a biometric ...
Hall's safe2/20/2011
  Q: I acquired a Halls safe, the serial number is 23508, I have seen your other posts and have resolved ...
  A: Ken, If your safe is a Hall's Safe Company, safe - based on the serial number I would place it ...
interior door lock @ acorns for hinges-Hall's safe2/20/2011
  Q: Missing interior door lock and hinge acorns for my:Halls Cinn Oh safe-restoration is my goal-for ...
  A: E, As you have a 1906 patent date on your safe, it is from the "second" Hall's safe company. The ...
Help opening tss c3 safe2/20/2011
  Q: I have a tss c3 safe, I have both the keys and combination. The opening procedure is anti-clockwise ...
  A: Diana, first we need to be on the same page. I'm assuming that your "TSS-C3" safe is an import ...
cole storage cabinet with combination safe2/19/2011
  Q: My friend has a Cole storage cabinet with combination safe in in. it has several drawers on one side ...
  A: Linda, This equipment is considered office equipment and not "safe" related. While it has a ...
Hall's safe2/19/2011
  Q: I acquired a Halls safe, the serial number is 23508, I have seen your other posts and have resolved ...
  A: Ken, If this is a Yale lock, which I would agree it probably is based on the last number, it is ...
Opening Procedures w Combination2/19/2011
  Q: Allied Gary Safe; MN: 3400 Special; SN: 81665W. What is the procedure for the electronic key pad. ...
  A: Richard, The three chirps indicates that time delay is active on your lock. Either you or someone ...
Parts for Dominion Safe #7482/19/2011
  Q: I am looking for replacement interior compartment drawer key, and a lock assembly for the interior ...
  A: Bruce, As Dominion Safe Company is no longer in business (1940-1975), there are no parts available ...
opening my safe2/19/2011
  Q: I have some important papers in my antique safe, its a small the Queens safe with the family name at ...
  A: Shirley, The "Queen" safe is a model, manufactured by Victor Safe & Lock. The dialing sequence for ...
lord combination lock2/19/2011
  Q: I own a lord combo safe. Hasn't been opened for months. Combo not operating I think one of the ...
  A: Allan, The locks don't work that way. There is no access to the lock wheel pack through the dial ...
how to open combinaton fire proof file cabinet2/18/2011
  Q: Ihave globe-wernicke fire proof file cabinet and lost the combination. Cabinet id #144844. Please ...
  A: Aleksander, I'm sorry but we DO NOT give out opening instructions. This web site is an open forum, ...
Ward's safe2/18/2011
  Q: I have a Ward's 9032 safe and would like to know the fire rating on it! Thanks
  A: John, Ward's didn't manufacture safes, they purchased "relabeled" safes from a couple of ...
Opening Procedures w Combination2/17/2011
  Q: Allied Gary Safe; MN: 3400 Special; SN: 81665W. What is the procedure for the electronic key pad. ...
  A: Richard, The logo would be "SG" for Sargent & Greenleaf. The opening sequence is your code and ...
cole steel filing cabinet2/17/2011
  Q: I have a cole steel filing cabinet with a small safe inside. I have the combination but I'm not able ...
  A: Haydee, It depends on the lock that you have, but the dialing sequence should be: 4 times left to ...
The Safe-Cabinet Standard M.E. Type Safe2/17/2011
  Q: We have a safe with these labels: "The Safe Cabinet Co. Marietta Ohio"; "The Safe-Cabinet Standard ...
  A: Donald, Safe weights vary depending on size, type and interior configurations. I'll need ...
Rocky Mountain Safe Company2/17/2011
  Q: Where to find information on Rocky Mountain Safe Company. I have tried Internet searches and have ...
  A: Wesley, It appears that this company was one of those small safe manufacturers that was only in ...
Glass Vials in Safe Door2/17/2011
  Q: I saw your answer to question regarding a safe manufacturer never having placed glass vials of nitro ...
  A: Kevin, Unless an individual placed nitroglycerine in a safe door as a booby trap, it was NEVER done ...
Location for a key2/17/2011
  Q: I have a key found in my mom's safety deposit box. (She passed away in may 2010.)The key is marked ...
  A: Lee, The short answer is NO! For a couple of reasons, LeFebure hasn't been around for about 15 ...
Mosler Safe2/17/2011
  Q: I have a mosler safe I would like to open. I have a 4 number combo ending in 50. It was the ...
  A: Steven, Using the standard sequence, your combination would be: The standard dialing procedure for ...
Morris-Ireland Safe Co.2/16/2011
  Q: I have a Morris-Ireland Safe Co. at my job. We would like to know what it will go for. Maybe we can ...
  A: Joseph, There were actually two "Morris" "Ireland" companies. If your safe says "Morris-Ireland" ...
Mosler Safe2/16/2011
  Q: I have a mosler safe I would like to open. I have a 4 number combo ending in 50. It was the ...
  A: Steven, The standard dialing procedure for a Mosler lock is: 4 times left to the first number, 3 ...
Diebold safe2/14/2011
  Q: I'm the guy who had the dial fall off. I've made a temp dial out of plastic and put 100 notches on ...
  A: Al, Yes there are locks that you have to push in on the dial to engage the handle, or engage the ...
Mosler safe combination2/14/2011
  Q: I have acquired a Mosler Safe. S/N 195693. It is open and I have access to the brass lock discs. ...
  A: Daniel, If you look closely at one of the wheels you will notice that it actually two main pieces, ...
Mosler Vault Door2/14/2011
  Q: I have recently acquired a Mosler vault door. I am wondering the value of same. The green tag on ...
  A: Renee, The door is a fire resistive door, used for protection of documents. These doors make great ...
Remington-Rand file safe (4 drawer)2/13/2011
  Q: I have had a four drawer Remington-Rand file safe since the mid-70's. It was obtained via military ...
  A: Mike, That depends on the bolt or bolt extension of the lock. Standard lock bolts extend about ...
Cannon Safe2/13/2011
  Q: I have a cannon gun safe that we recently moved from one house to another. It had been several ...
  A: Jon, There are a number of possible problems that we need to review; 1. first would be incorrect ...
Norway Safe2/13/2011
  Q: I have been clearing the house of my employers mother. Behind the antique wardrobe, we discovered a ...
  A: Kristian, I'm sorry for not getting back to you right away, but I've had to look through a lot of ...
Mosler Bahmann & Co Safe2/13/2011
  Q: I have a Mosler safe that was given to me. He does not remember the combination to the safe and i ...
  A: Steven, Records of original combinations would be held by the manufacturer. These records are ...
GARY Personal safe2/12/2011
  Q: I picked up a used (free) Gary personal safe. I understand it's a low end item, so not worthy of ...
  A: Erik, As the "Gary" safe company that manufactured your safe is no longer in business - it was ...
Mosler Safe2/11/2011
  Q: I recently purchased a Mosler safe at an auction of unclaimed valuables from a storage facility in ...
  A: John, THE Mosler Safe Company went bankrupt in 2001. The companies that are using Mosler's name ...
Sargent Greenleaf safe lock2/9/2011
  Q: I have a very old safe with what appears to be a replacement combination lock. Many years ago I had ...
  A: John, Just like watches which require resetting to keep them accurate, locks need service to ensure ...
Antique Safe2/9/2011
  Q: Andy, I live in Concord Ca, I have an addiction to collecting interesting old safes. Do you either ...
  A: Alan, I live in Antioch - what a small world! I might know of one for sale, I'll have to check on ...
Victor Safe&Lock Co2/8/2011
  Q: My concern is for a lost combination as did Glenn, Dated 7/23/10. In your response to him, you ...
  A: Elizabeth, You might want to check for a local company. Check your yellow pages under "safes & ...
AMSEC drop safe, can't open2/8/2011
  Q: I have an AMSEC BWB-2020FL, I can not find the combination, it has not been opened in years, is ...
  A: Shawn, my first recommendation would be to have AMSEC do a record search for the combination. Send ...
Re-lockers2/7/2011
  Q: my question to you is regarding re-lockers. I am in the process of building a safe complete from ...
  A: Joe, I'm going to have to pull a couple thermals out to see what they are rated at. Manufacturers ...
purchase and moving Diebold Cashgard2/7/2011
  Q: Andy, I am looking at purchasing a Diebold Cashgard. It was removed from a "financial institution". ...
  A: Frank, Plate safes are much more sensitive than composite style safes. Even with 1" thick welded ...
excalibur gun safe2/6/2011
  Q: Our zip code is 76442, safe will not open.Thanks, Jodie
  A: Jodie, You've presented me with something of a problem here, you didn't let me know what the ...
floor safe2/6/2011
  Q: need to open a floor safe square top reads Morris has a dial chrome handle on the left hings on the ...
  A: Dave, If you don't have a combination for the safe, then you have two options, 1. Start dialing ...
Meilink Safe Lock Maintenance2/6/2011
  Q: I've noticed some binding when I open the bolts on this Meilink safe. The tag says Safe No. A 90618, ...
  A: Mike, If you are experiencing binding in the bolts, then the problem isn't with the lock. The lock ...
css safe2/6/2011
  Q: bought this safe at auction its model#B30181C have current combo but would like to change it dont ...
  A: Keith, Yes that does make a difference! I'll need to know what manufacturer and model lock you ...
css safe2/6/2011
  Q: bought this safe at auction its model#B30181C have current combo but would like to change it dont ...
  A: Keith, Depends on what lock is on your safe. Chances are it is a Sargent & Greenleaf (S&G), or a ...
dont know combo2/6/2011
  Q: my mother in law just moved in to a retirement home and gave us her safe it is a vanguard vs-250 ...
  A: Cherry, These safes were sold by Sears years ago. Many of the "VanGuard" series of safes were ...
locked safe2/6/2011
  Q: I have a very old safe with a Yale lock on it. It has a single dial and a four number combo. It ...
  A: L.C. Explosives? Just kidding. I kind of need to know what safe you have, or the combination that ...
Lock!2/5/2011
  Q: The Victor Patent Lock and Safe Company was based out of Cincinnati, Ohio. form approx 1980! I Want ...
  A: Jose, The best way to sell your safe would be through Ebay, craigslist, or a local advertising ...
Whats it worth $?2/5/2011
  Q: I have this door that a person wants to buy but I have no idea what to charge. Its from Halls Safe ...
  A: Derek, Sorry, but the picture is only postage stamp size and I can't make anything out. This ...
DIEBOLD COMBINATION DIAL2/5/2011
  Q: I own an older Diebold safe 43"w x 27"d x 74"h. It has sat in my garage for a number of years and ...
  A: Al, I know which dial you are talking about, and I may have a replacement for you. As far as my ...
Re-lockers2/4/2011
  Q: my question to you is regarding re-lockers. I am in the process of building a safe complete from ...
  A: Joe, A relocker is basically just a spring loaded pin (square or round), held in position by a ...
DIEBOLD COMBINATION DIAL2/4/2011
  Q: I own an older Diebold safe 43"w x 27"d x 74"h. It has sat in my garage for a number of years and ...
  A: Al, The dial had 100 numbers (1-100 or 0-99, 0=100). Question, are you saying the "Dial" has ...
Re-setting combinations on Star floor Safe2/4/2011
  Q: The floor safe is rectangular (10.5" x 16")± with a Sargeant & Greenleaf combination dial. The lock ...
  A: Doug, I assume that the safe is unlocked, door open! On this safe you can change reset the ...
Re-setting combinations on Star floor Safe2/4/2011
  Q: Andy, I have a Star Floor safe similar to John's. In my case the safe is open, but I don't know the ...
  A: Doug, I never run one answer into another, its too easy for readers to misinterpret or understand. ...
Old dominion safe & vault co. niagra falls2/3/2011
  Q: have an old safe times are tough can you give me a approx value
  A: Dave, First thing we have to do is ID your safe. Dominion was a distributor, not a manufacturer. ...
Star floor safe lids only2/3/2011
  Q: I have 2 star floor safe lids only (C3 & CD7K) w/combonations, I can get it to the open position and ...
  A: Terry, The bottom part of the safe is not as important as the neck that the door locks into. If ...
Herring Hall Marvin Safe locked open2/2/2011
  Q: My great aunt has left me a Herring Hall Marvin Safe Co. safe that is open, but locked. She did not ...
  A: Becky, You shouldn't have any problem getting the combination for the safe either recovered or ...
identifying an old safe2/2/2011
  Q: I just bought an old safe. A local locksmith said it was probably built between the late 1800's to ...
  A: Rob, Most locksmiths don't know any more about safes than you do. This is why I never recommend ...
"The Protector" Digital Electronic Gun Safe (Model 6743D)2/2/2011
  Q: 3 or 4 yrs ago, I purchased this safe from Costco Canada Ltd. It has always worked fine, ...
  A: Rick, Sisco safes are currently marketed under the "Honeywell" logo. The current contact info that ...
Bank vault2/1/2011
  Q: We have a newspaper article relating to a bank vault being shipped in 1902 and weighing 6500 pounds. ...
  A: Deb, Come on, we're talking 1902. With the exception of the vault door, the rest of the vault was ...
Meilink Steel Safe Company Safe Problem2/1/2011
  Q: I have a safe from the Meilink Steel Safe company and we can not get the door open. This safe is ...
  A: Kallie, Meilink is currently owned by FireKing International. www.fireking.com or 1-800-528-9900. ...
safe won't alwasy open2/1/2011
  Q: We have a Montgomery Ward Safe model 9042,made by Meilink Safe Co. Lately when we try to open it, it ...
  A: Phyllis, Even if you but the most expensive watch available, you will occassionally have to reset ...
Mosler Safe2/1/2011
  Q: i was given a Mosler Safe with serial 331993 it appears to be from the 1932 era, there is also a ...
  A: Mike, I would have to see the safe to answer this question, though with it locked up its value is ...
fichet-bauche biltmore 3502/1/2011
  Q: A friend of mine bought this safe at an auction and it was open. During delivery it was locked by ...
  A: BD, I'm very familiar with this type of safe, in fact I have a F-B Bastille in my warehouse we are ...
Mosler Safe1/31/2011
  Q: i was given a Mosler Safe with serial 331993 it appears to be from the 1932 era, there is also a ...
  A: Mike, My math places it in the mid 1931's. The 50-25-50 combination was a result of ...
Norway Safe1/31/2011
  Q: I have been clearing the house of my employers mother. Behind the antique wardrobe, we discovered a ...
  A: Kristian, sorry but there isn't enough of the safe in the photos for me to identify it. It appears ...
reset a relocking device1/31/2011
  Q: I have a LaGard electronic device that has relocked on me, I need to reset if possible. I was in ...
  A: Larry, Ok, that makes a little more sense. Attach the key pad to the exterior of the door with the ...
Art Metal Safe1/31/2011
  Q: I just bought an Art Metal 2-door safe measuring 56" wide by 75" high by 41" deep. One tag says "US ...
  A: Stan, Manufacturers never released or published their serial number or data specification sheets. ...
Art Metal Safe1/31/2011
  Q: I just bought an Art Metal 2-door safe measuring 56" wide by 75" high by 41" deep. One tag says "US ...
  A: Stan, Sorry but my "crystal ball" is in the shop. i will need to see your safe to give you an ...
Old safe have # s can not open1/31/2011
  Q: We have an old safe of my parents Mom has dementia and does not remember how to open . I have what i ...
  A: Mike, There are only three reasons a safe lock won't open: 1. incorrect dialing sequence, 2. ...
trouble with combination lock1/31/2011
  Q: I recently purchased an american security gun safe. I am having difficulty opening the combination ...
  A: Randy, The index mark at 12 o'clock is the correct one to use. The one at 11 o'clock is a service ...
Diebold cash guard torch and tool resistance safe JRTL 301/30/2011
  Q: safe purchased years ago at a going out of business sale - it is extremely heavy. Now want it out of ...
  A: Cathy, We may be interested in the safe, but we will need to see what you have. Many of the older ...
Antique safe1/30/2011
  Q: We purchased an old safe from a neighbor at a moving sale. It is on rolling metal wheels, has a ...
  A: Rose, As you have posted this question under antiques, my first question involves your wanting to ...
Major safe model 48201/30/2011
  Q: I may have an opportunity to acquire a Major Safe model 4820 for moving costs(professional). Do you ...
  A: John, Obviously you need a new search engine as well. Major Safe Company was purchased by American ...
reset a relocking device1/30/2011
  Q: I have a LaGard electronic device that has relocked on me, I need to reset if possible. I was in ...
  A: Larry, This is one of the reasons that I don't encourage DIY projects on safes. Don't feel bad as ...
Unlocking a safe1/28/2011
  Q: How do you unlock an "American Standard" safe. I have the combination, but I can't unlock it. There ...
  A: ISY, I don't think the name is "American Standard", It is probably "American Security Products" or ...
steelage safe by empire1/27/2011
  Q: i am a locksmith and have the task of opening a steelage tl30 safe made by empire. the safe has been ...
  A: Joe, While the SteelAge safe you are working on may have been sold by Empire Safe, it wasn't made ...
Sentry Safe Door Handle1/27/2011
  Q: I have a 14 gun sentry safe purchased from Home Depot. I bought it with some minor damage but ...
  A: Night Foley, Unfortunately the Sentry safes have a lot of parts made of plastic or cheap cast ...
victor safe1/27/2011
  Q: i bought an old victor safe with no combination...think its around 1900...dial goes to 100....how ...
  A: Jamey, If you don't have the combination your options are limited. You can try all of the ...
Johnson Pacific floor safe1/27/2011
  Q: We have a Johnson Pacific round floor safe that was given to us by my grandfather. I really like ...
  A: Dave, Service and/or Maintenance recommended schedules: Commercial use: Annually - Clean, lube, ...
star safe ,model E8H, ser 540001/27/2011
  Q: Andy I have an old star safe door is open like to change combo I have the back off it feels like it ...
  A: Mike, I don't recommend that you attempt this for the same reason that I don't recommend that you ...
cary safe1/26/2011
  Q: I nave an old Cary safe ser.#103058,double door have combo for that, but when I open it there is ...
  A: Alan, The interior chest is usually the "Jewelers" chest. Cost to open this is probably double ...
Meilink Safe-T-Vault1/26/2011
  Q: I have a Meilink Safe Co. Safe-T-Vault. It is 12 1/2" wide x 16" long by 9" deep. It has a lock ...
  A: Jan, The lock may be jammed due to either dirty or dry lock, or something may having become caught ...
Mosler safe1/26/2011
  Q: We have this big heavy safe at work. It is a Mosler Firesafe NO345130. It's 27"x23"x41"h Can you ...
  A: Jenn, I'm not sure the serial number that you have is the safe serial number. It may be the label ...
victor safe 18851/26/2011
  Q: i recently aquirred an old safe...has a seal on the front with 1885 on it...can verify its been ...
  A: Jamey, Victor didn't make a 4 wheel lock. A two wheel lock has two combination wheels and a drive ...
victor safe 18851/26/2011
  Q: i recently aquirred an old safe...has a seal on the front with 1885 on it...can verify its been ...
  A: Jamey, The "seal" only indicates the "beginning" of the company not the date of manufacture of the ...
purchase and moving Diebold Cashgard1/25/2011
  Q: Andy, I am looking at purchasing a Diebold Cashgard. It was removed from a "financial institution". ...
  A: Frank, Safe techs usually don't care where the safe is when they service it. We are used to ...
Insulated Filing Cabinet1/24/2011
  Q: I have a Art Metal 4 door filing cabinet that is insulated. Made in Jamestown, NY. I was wondering ...
  A: Lisa, Art Metal Safe, or Art Metal Construction Company (AMCO), Jamestown, NY 1888 to around 1950. ...
cannon safe1/24/2011
  Q: I have cannon safe s&g lock I cannot open, put new battery in and i get 1beep followed by 3beeps ...
  A: Jeff, The 3 beeps indicates that you are in a penalty period. Cannon has the lock set for at least ...
Gary Safe Co.1/24/2011
  Q: I have a Gary Safe Co. safe #9375. It's only about 1ft cube. I have the combination 1-38-22-44, but ...
  A: Shonda, The dialing sequence for your safe is: 4 times left to the first number, (1) 3 times right ...
purchase and moving Diebold Cashgard1/24/2011
  Q: Andy, I am looking at purchasing a Diebold Cashgard. It was removed from a "financial institution". ...
  A: Frank, The dialing sequence for your lock will be: 4 times left to the first number, 3 times right ...
replacement lock1/24/2011
  Q: I lost the key to my sent. gun safe and had to drill it. My question is, Do u know where I might be ...
  A: Vicki, I'm assuming you are asking about a Sentry Gun Safe? My first recommendation would be to ...
Cary Safe1/24/2011
  Q: My wife and I purchased a house that came with an old Cary safe in the basement. The serial number ...
  A: Matt, The lock on your safe is probably a "straight tail piece lock, with screw change wheels, and ...
Yale locks and keys for Art Metal Construction Inc.1/24/2011
  Q: Andy: I found a cabinet with 15 lockable compartments. Several of the keys are missing. One entire ...
  A: Glenn, You should be able to have keys made for the locks at any locksmith shop. They may also ...
Mosler Safe1/24/2011
  Q: Andy, I have an old Mosler Safe that I inherited with the purchase of my home. It has Mosler Safe ...
  A: Greg, Sounds like you have a screw door safe. The numbered "wheels" are a time lock. To have ...
open safe door1/23/2011
  Q: i have a steelmaster file cabinet safe..i lost the combination and cannot get into it. is there a ...
  A: Veronica, Sure, you can try all of the possible combinations. The dialing sequence should be: 4 ...
Dialing sequence of a Yale floor safe1/23/2011
  Q: Our family is trying to open an old Yale floor safe .. best guess of year would be 50's or 60's ?? ...
  A: Rodney, First, Yale is a lock manufacturer, not a safe manufacture. Second, I wouldn't recommend ...
Safe Identification and construction1/23/2011
  Q: I have a friend whose mother is moving into a nursing home and she has a safe her husband who is ...
  A: Mark, You are not alone in your belief in the lack of training you receive from these schools. But ...
HELP1/22/2011
  Q: My name is Carson Bradley and im in a bit of a delema. My Grandmothers father passed away and left ...
  A: Carson, Where did you hear the term "failsafe" combination? There never has been such a term ...
Sentry Safe A3187 stuck won't open.1/22/2011
  Q: The handle is in the down posititon, the key lock is sticking out, It looks like it was tampered by ...
  A: Daisy, Unfortunately your "inexpensive" Sentry safe is made of mostly plastic pieces, anyone of ...
Mielink Safe1/22/2011
  Q: I'm a locksmith and a customer has a Meiling safe SN# 69079 I also have a manual showing factory ...
  A: Hank, I'm not sure what "manual" you have, but Meilink never published factory combinations by ...
liberty safe1/21/2011
  Q: I have a Liberty safe model lw-1263. For months we have been using it without the combo. we have ...
  A: Mark, Chances are your safe has a "Sargent & Greenleaf" lock. If the lock has failed then it will ...
Montgomery Ward Safe #9032 fire rating1/21/2011
  Q: Can you advise what the fire rating is for this safe?
  A: Vera, The safe will have either a UL label on the safe, or a manufactures label stating what the ...
protectall safe1/21/2011
  Q: We have a proectall safe I have the numbers on the outside and inside of the safe is there a way to ...
  A: Michael, Is the safe open? If it is, have a safe technician from a local safe company reset or ...
CSS safe1/20/2011
  Q: Several years ago I purchased a used CSS safe The serial no. Is the only identifying name. It is ...
  A: Rob, most of the electronic locks sill not lose the combination when changing batteries, however, ...
old safes1/20/2011
  Q: my office moved into an old bank and it has a LeFebure #319828 safe that we can not get into what do ...
  A: Jim, If you don't have a combination, then you will need to have a safe technician from a local ...
Lost combination - Mosler Safe1/19/2011
  Q: Have a wall safe that hasn't been opened since 1983. It is a Mosler which indicates for service the ...
  A: Linda, Sorry, Mosler has been out of business for almost 10 years and no records are available to ...
mosler safe combination sequence1/19/2011
  Q: My sister-in-law has an old mosler safe (maybe 50 years old)that she and her husband inherited from ...
  A: Jerry, Forget the previous instructions that you were given. I'll restate my original statement. ...
safe& lock co safe1/19/2011
  Q: i have a safe and lock co safe from cincinnati o, the t handle has numbers stamped in it and they ...
  A: Wesley, First off, Cincinnati was the safe capital of America for 100 years. Dozens of companies ...
S&G 6500 series vault lock1/18/2011
  Q: I have a 1970's TDR safe with an S&G 6511 4 wheel vault lock and glass relockers. I am concerned ...
  A: Jon, Of course the value would be in that you won't have to worry about "punch attacks", that being ...
year and value of safe1/18/2011
  Q: i have a j&j talyor safe no. on handle is 22532 the safe is about 4 foot by 3foot it is on steel ...
  A: John, JJ Taylor manufactured safes from 1855 to around 1927. There are no records by serial number ...
changing safe combination1/18/2011
  Q: I got an older safe from my brother. A sentry.Dial type with a plastic key holder inside the door. ...
  A: Jerry, Then you will have to buy a better quality safe that has a lock that uses a lock that can be ...
Brinks safe access1/18/2011
  Q: I have a Brinks safe Model #5080 "Sisco", serial 012455, Key 1135. I have never used the combination ...
  A: Ron, While the safe came from the factory set on an original combination, there is no guarantee ...
ILCO Unican1/18/2011
  Q: This lady wanted me to get a safe out of her basement. I removed the contents, closed the door and ...
  A: Randy, Ilco / Unican manufactured safe locks for awhile, not safes. All of their locks left the ...
cannon safe electronic lock1/17/2011
  Q: There is a questions asked about the electronic lock on a Cannon safe. We have the same trouble ...
  A: Glenys, Don't be mad at the lock, its just the way electronics are. Fortunately the newer locks ...
mosler safe1/17/2011
  Q: I have 3 safes in my office which was once a bank about 40+ years ago. One is a large door Mosler ...
  A: Donna, In order to answer questions, identify, evaluate or appraise your safe, I'm going to need ...
steelmaster file cabinet, key lock1/17/2011
  Q: i own a steelmaster file cabinet with a key lock and i have lost my key. i have been researching ...
  A: Timothy, Steelmaster was a "product line" from the "Art Steel Company, Inc." of New York. This ...
Vanguard VS-250 Safe Lost Combination1/17/2011
  Q: I have a Vanguard VS-250 safe. I can't remember the combination. It is open and unlocked. Is ...
  A: Bill, You can probably figure out the existing combination by observation of the wheels inside of ...
Safe identification1/17/2011
  Q: Good Evening, When we moved into our house, we found a safe in a closet in the basement. It looks ...
  A: Alana, Keystone safe & lock was a distributor, not a manufacture, so the first thing we need to do ...
John M Ulrich - Cary Safe Co - Buffalo, NY1/16/2011
  Q: My mother own a safe that she wants to sell. The markings are: John M Ulrich Cary Safe Co Buffalo, ...
  A: Michelle, I will need to see the safe to evaluate it. "John M. Ulrich" was probably an owner of ...
Worth it1/16/2011
  Q: I've located a Diebold ? safe 79"h x 51"w x 36" d it appears that it is designed to be framed around ...
  A: Aaron, I will need to see better photos of the safe to determine what it is and what is was ...
S&G Electronic Lock is Flakey / Liberty Safe1/16/2011
  Q: I've enjoyed reading your other replies, and would like your opinion on my issue. I have a Liberty ...
  A: Hunter, Unfortunately Liberty Safe is locked into a contract with S&G to use their locks. That's ...
Cary safe1/15/2011
  Q: Terry, I have a \Cary safe in the basement of a house that we bought. the home used to be owned by ...
  A: Dave, In order to answer questions, identify, evaluate or appraise your safe, I'm going to need ...
Locked Safe1/14/2011
  Q: I recently purchased a martial arts school with a drop safe (Diplomat DS20). I've used it a couple ...
  A: Derek, Most of the digital locks have a penalty period to keep an unauthorized person from playing ...
J.J Taylor Safe1/14/2011
  Q: I have a very old Safe made By the J.J Taylor brothers. It was given to be locked and I am trying to ...
  A: Louis, What kind of help are you looking for? JJ Taylor was in business from 1855-1927. There are ...
Open an old safe1/14/2011
  Q: I have a very old safe that I cannot open. The old combination that used to open it was changed, ...
  A: Bob, The majority of mechanical locks can be opened without drilling, HOWEVER, the caveates to this ...
How to use safe combination1/14/2011
  Q: My mother-inlaw has a Wards safe (about 30 years old) and the combination but she can't remember how ...
  A: Chas, The dialing sequence should be: 4 times left to the first number (69) 3 times right to the ...
unable to lock safe with stuck handle1/13/2011
  Q: a mosler, #10Y40634 SMNA group 4, Cat 2E, front of door # is 10273-22. Having trouble closing door ...
  A: Lorna, If the hinges are worn or out of adjustment then your door won't close correctly, if it ...
J. Baum safe1/13/2011
  Q: is there any way to find the combination to a J. Baum safe from it's serial number?
  A: John, Unfortunately NO! Manufacturer's never listed the lists of combinations, and when they go ...
lost combination for safe1/12/2011
  Q: I have a Royal Safe R10 for which we have the key but can't remember the whole combination number. I ...
  A: Jackie, You would need to contact the manufacture to see if they maintain records of the original ...
Schwab safe, have combo but i can't get open1/12/2011
  Q: I recently acquired my grandfather's safe. It was unlocked before previously before I picked it up. ...
  A: Christopher, The dialing sequence is not specific from safe to safe but from lock to lock. As most ...
I need help Terry1/12/2011
  Q: I bought an older Marvin safe hoping to restore It locked itself while moving If you think ...
  A: Billy Joe, OUCH! Unfortunately if you don't have a combination for the lock, you are probably ...
can you help out1/11/2011
  Q: Terry I have found a Antique Philadelphia Pin Key Duplicator. I was going to sell it on ebay but ...
  A: Mark, This is a unique item that will require a unique customer. Obviously a potential buyer that ...
mosler safe combination sequence1/11/2011
  Q: My sister-in-law has an old mosler safe (maybe 50 years old)that she and her husband inherited from ...
  A: Jerry, Unfortunately people tend to write down combinations the way THEY understand them, not ...
victor cannonball safe1/9/2011
  Q: sorry forgot to add i found on this safe an electrical plug.it comes out of the front at the bottom ...
  A: John, Interesting, I haven't seen a cannonball safe with an electric plug attached. This is ...
Sisco Model 10701/9/2011
  Q: It's the same question at the start of the page. I misplaced my key to the above model Sisco safe. ...
  A: Carmen Sisco is currently marketing safes under the "Honeywell" logo. The below information is the ...
Yale com. lock on a double door safe1/8/2011
  Q: Mother passed away and I found what I think is the combination of a safe we now own. I don't know ...
  A: Will, The dialing sequence would be: 4 times right to the first number (25) 3 times left to the ...
How much does my old Mosler safe weigh?1/7/2011
  Q: I became owner of an old Mosler safe which is not open and whose combination is lost. I want to ...
  A: JJ, As your safe was built in the early 1960's (60-65), it could be a burglary safe, a fire safe, ...
cole-steel safe combination1/6/2011
  Q: I have inherited a filling cabinet with a safe. It is in an opened status. When I turn the dial at ...
  A: Robert, Dial up each wheel aligning the notch (gate) with the little window, observe the ...
Combinaation Lock1/6/2011
  Q: I have a Vanguard Safe that is open but I do not have the combination. I opened the mechanism behind ...
  A: Mike, Each wheel is basically two parts, the outer wheel (with the numbers), and the inner hub. ...
1800's? safe1/6/2011
  Q: I have a Deibold safe that measures approx 68"H x 28W x 26"D. The stamping on the dial reads a ...
  A: David, Sorry, but I don't try to teach manipulation to anyone that I don't know, and usually that ...
Fireproof Shaw-Walker file cabinet1/5/2011
  Q: I wonder if I can help in your search for fireproof file cabinet parts...I have one I'm trying to ...
  A: Lori, Thanks for the offer, but I don't have a Shaw-Walker file cabinet in need of repairs. If you ...
Mosler Safe1/5/2011
  Q: I have an old Mosler #130747 Class T-20 that I inherited.I would like to use it for my personal ...
  A: Fred, If the door is locked closed and no combination is available, then you will need a trained ...
Safe restoration1/5/2011
  Q: Andy, In your answer to this question, ...
  A: Andrew, Lets start off on the same page - first off "Hall's Safe Company" wasn't in business in the ...
victory safe restoration1/5/2011
  Q: i have purchase an old victory safe and have had it opened and a new combination issued. I want to ...
  A: Paul, I'm sure you mean "Victor", not Victory. The Victor Safe & Lock Company was around from 1885 ...
identifing a 1950 series safe1/5/2011
  Q: Chief, I have a Victor (I think) 1950 series safe, I would like to locate somewhere I could get an ...
  A: Mike, I will need to see more photos of both safes to accurately ID your safes. While I can't see ...
Halls Safe & Lock, Cincinnati, OH1/4/2011
  Q: I have a Halls Safe Serial # 21085 and has Hasley Bros. on the front. I would like to know when it ...
  A: Ed, I will need to see your safe to evaluate it for you. In order to answer questions, identify, ...
Lost combination1/4/2011
  Q: I read one of your replies to a question of the value of a Halls and Company Safe. I really learned ...
  A: Chris, You have two options, well three if you consider ruining your safe an option. First - you ...
no combination1/4/2011
  Q: Can I use a stethoscope and hear the tumblers click? how many numbers are there and does it go r l ...
  A: Tim, Combination locks don't have tumblers, they have wheels, on this particular lock you will hear ...
re: age research and possible appx. weight1/4/2011
  Q: I have a Mosler and i am trying to figure out an approximate age and wieght of it and possibly its ...
  A: Jamie, The SMNA (Safe Manufacturers National Association) tag has nothing to do with your safe ...
wynchester gun safe1/3/2011
  Q: the safe is locked and the combination dial came completely out in my hand what going to be the ...
  A: David, My first recommendation would be to have you contact the manufacturer. If this is a ...
SAFE WILL NOT OPEN1/3/2011
  Q: WE HAVE A SARGEANT @ GREENLEAF SAFE BOUGHT IN 1999 OR 2000. IT HAS OPENED FINE ALL THESE YEARS. IT ...
  A: Joddie, Sargent & Greenleaf is a lock manufacture, not a safe manufacture, so you have an unknown ...
lost safe combination1/3/2011
  Q: I have a safe that was given to me some years ago and I have lost the combination. On the front is ...
  A: Tony, The names are likely an owner and a distributor, they are not a manufacturer. We will have ...
The Victor Fire Insulated Container Spec F2-ND1/2/2011
  Q: Andy, We have this container and thought we had the key SOMEWHERE. We can't find the key and the ...
  A: Louis, Check with these three local companies. If they can't help you, they may know of someone ...
The Victor Fire Insulated Container Spec F2-ND1/2/2011
  Q: Andy, We have this container and thought we had the key SOMEWHERE. We can't find the key and the ...
  A: Louis, Because of the "general forum" nature of this website, all personal information is cleared ...
The Victor Fire Insulated Container Spec F2-ND1/1/2011
  Q: Andy, We have this container and thought we had the key SOMEWHERE. We can't find the key and the ...
  A: Louis, The Safe Manufacturers National Association (SMNA), F2-ND specification indicates the ...
Opening a css safe without combinations12/31/2010
  Q: ....I have an older CSS safe with combination and key entry system. I have the key but have lost ...
  A: Randy, If you don't have a combination, and CSS doesn't have a record, then you are limited to two ...
opening a old safe?12/31/2010
  Q: I'm having problems opening a old safe, I got it from my grandparents, I have had it open a few ...
  A: Richard, Your description of the safe could be anything. If you don't know what you have then I ...
york safe combination sequence12/30/2010
  Q: I have a york floor safe about 3 feet high and 1.5 feet square from about 1974 - or 76. It's been ...
  A: Doug, This appears to be later York, late 1950's or early 1960's. The lock appears to be an S&G so ...
Hercules Home Vault Key Replacement12/30/2010
  Q: I own a Hercules Home Vault (FC8K key lock), manufactured by the Meilink Steel Safe Co. of Toledo, ...
  A: George, Most larger locksmith shops, should have the key blank and be able to duplicate your key. ...
Dial turns hard12/30/2010
  Q: I purchased this safe in the late '60's (not real sure). Serial # 354501. The dial turns ...
  A: Norbert, You didn't give me any information about your safe other than the serial number. ...
Mosler SFC-512/30/2010
  Q: I recently purchased a Mosler SFC-5 from an auction. The drawer is open but locked. It has a digital ...
  A: Nicole, First off, there is no such thing as a "default" combination. Locks from the factory for ...
Old Victor Firemaster cabinet12/30/2010
  Q: We have an really old Victor Firemaster filing cabinet with a 1 hr rating. White powder is coming ...
  A: Sheila, If a manufacture was known to have used asbestos at all, then everything manufactured by ...
Cole Steel file cabinet with combo lock12/30/2010
  Q: Andy, I have an old dark green Cole Steel 2 drawer file cabinet that has a comination lock on the ...
  A: Eric, They haven't made these locks in years, and I'm lucky to see maybe one per year. Luckily ...
Victor Safe & Lock12/30/2010
  Q: I have a heavy floor model Victor Safe & Lock safe Cincinnati, Ohio. It is open but when I do the ...
  A: Carl, If you are mechanically inclined it will be a simple job to disassemble it, service it and ...
H. P. Floor Safe12/29/2010
  Q: I have a floor safe from H.P. Safe Manufacturing Co. 5561 Valley Blvd. Los Angeles 32 Calif. Model ...
  A: Tim, This company has been out of business for a number of years now. The only company that still ...
j baum safe12/29/2010
  Q: Is there any database to search a serial number from a j baum safe to verify whom it was sold to? ...
  A: Mark, Nope! Manufacturers don't keep data bases by serial number on anything. If you contact the ...
mosler safe, serial #23487712/29/2010
  Q: This safe was in the old Tractor building built by Ivy Zumwalt back in 1920. The safe has the words ...
  A: John, I can't give you any history or information about an individual safe, as there are no records ...
Old Victor Firemaster cabinet12/29/2010
  Q: We have an really old Victor Firemaster filing cabinet with a 1 hr rating. White powder is coming ...
  A: Sheila, Victor was never known for using asbestos, the material is probably a gypsum mortar mix. ...
Relockers - Glass or Metal; Confirming TL-15 Rating12/29/2010
  Q: Andy, There are three questions I need your assistance on. First, regarding relockers, do you have ...
  A: Dan, Relockers are designed to provide protection from certain types of attacks. While the ...
victor safe12/28/2010
  Q: I have a floor model victor safe made in Cincinnati Ohio, the date on the dial is Oct3,38, My ...
  A: Becky, The date on the dial is a patent date for the lock. Patents were issued for up to the 20 ...
Victor Safe & Lock12/28/2010
  Q: I have a heavy floor model Victor Safe & Lock safe Cincinnati, Ohio. It is open but when I do the ...
  A: Carl, First off, I don't recommend the use of WD-40 in locks. It is not a lubricant, it is a water ...
Mosler Fire Door #15 Removal12/28/2010
  Q: Our customer occupies a building, which once housed a bank. Within the confines are several vaulted ...
  A: Cottco Specialty Hardware Sorry, but serial numbers are only used by the factory. They indicate ...
Herring-Hall-Marvin 1954 Field Safe12/28/2010
  Q: I bought a Herring-Hall-Marvin 1954 field Safe at a fleamarket. The door was open so I was able to ...
  A: Bubba, The combo can probably be changed, how easy and what steps depends on what lock you have. ...
How to change the combination12/28/2010
  Q: I have a Cole cabinet with a combo lock door (I have the present combo). I want to change the ...
  A: Glenn, I always recommend the use of a safe technician when lock disassembly or reseting is ...
Diebold file safe problem12/28/2010
  Q: I own a Diebold file cabinet safe, model #20-63. The combination lock works great, but the locking ...
  A: Cynthia, generally mechanical problems require hands on diagnostics and repairs. As I'm not ...
Inherited safe but no combination.12/28/2010
  Q: I got a safe from a family friend that was her dad's but he died and no one else knew the ...
  A: Ryan, Well I have good news and I have bad news. But first its story time! :) Montgomery Wards ...
safe service12/27/2010
  Q: Terry , i have a 15 y/o gardall wall safe that i could not open until i did research and by adding ...
  A: James, I never recommend that an owner disassembles and services their safe lock, for the same ...
Stuck drawer12/27/2010
  Q: I have the exact problem of the person who wrote you about the Remington Rand file safe drawer ...
  A: Roger, Unfortunately, this website doesn't let email addresses or personal info appear, so I have ...
ShawWalker Fireproof Filing Cabinet12/26/2010
  Q: I have an old Shaw Walker Fireproof 1 exp. "Built Like A Skyscraper" that is missing a brass rod and ...
  A: Judy, SHAW-WALKER SAFES (1903-1990 ) Began in 1903 with the founding of the Shaw-walker Company. ...
protectall safe12/26/2010
  Q: I inherited a 1954 protectal safe from my grandmother. The safe is unlocked and oppened. I can turn ...
  A: Jon, First the history of the Protectall Safes. PROTECTALL SAFES (1930’s to 1949) In the 1930’s a ...
Opening Lefebure safe12/25/2010
  Q: My dad got a Lefebure teller safe (about 3 feet tall, with two key opening cash drawers and a safe ...
  A: Michael, The dialing sequence should be: 4 times left to the first number, 3 times right to the ...
book on antique safes12/25/2010
  Q: Terry do you have an idea where I can find a book that might list safe manufactures safe models, ...
  A: Tommy, Sorry but there has never been a book that lists all this information. It would be nice if ...
Mosler safe12/24/2010
  Q: We have a very old Mosler safe that can't ber opened because we do not have the combination. Is ...
  A: George Unless you have a "time traveling DeLorean" you won't be able to contact the manufacture as ...
Re: Diplomat 100 Safe12/22/2010
  Q: I have a Diplomat 100 safe that has a 4 digit combination and a key. I have the 4 numbers and the ...
  A: Sandi, Depending on how the lock was set up one of the following sequences will work: 4 times left ...
Victor Safe12/20/2010
  Q: I read your response regarding the dialing of the combination of a Victor safe... ie 4,3,2,1. Is ...
  A: Todd, One of the biggest problems I see with safes that don't open is from people passing on ...
Victor Safe12/20/2010
  Q: i emailed you one time before and still have the vioctor safe unopened but I recently found a paper ...
  A: Sonya, The dialing sequence would be: 5 times left to the first number (10) 3 times right to the ...
hall safe co. cincinnati12/19/2010
  Q: I bought a 24x24x72 safe 74755 anything you could tell me would be greatly appreciated. Thanks
  A: Bo, The "Hall's Safe Company" manufactured safes under this label from around 1905 to the mid ...
Old Safe12/19/2010
  Q: I've got this old safe that belonged to my great grandfather. He lived in San Francisco from the ...
  A: Scott, The "California Safe & Lock Co.", was a distributor, not a manufacture. Based on the photo ...
Cn I replace Electronic Lock with Dial on Winchester Gun Vault12/18/2010
  Q: I got a steal of a deal on a cheap Winchester Supreme 51 gun capacity gun vault. The only thing I ...
  A: Geoffery, Some of the chinese built safes have propietary locks that do not use the same ...
diebold safe12/18/2010
  Q: i have a diebold safe that is dated may 27 1871 i have the original papers with all the info on ot ...
  A: Debbie, The date is a Patent date and has nothing to do with the date of manufacture. In order to ...
Mosler safe12/17/2010
  Q: I am writing in regards to a Mosler vault safe located in our Town Office. The office space ...
  A: Vicki, While there are customers that are looking for doors like this, there are several problems ...
floor safe in my parents house12/15/2010
  Q: my parents say it was here when they bought the place over 10 years ago, It is a star safe model ...
  A: Guy, Unfortunately your choices are limited. All the records of the original combinations prior to ...
removing a safe12/15/2010
  Q: I have a large fireproof safe on the second floor of our building, it was brought in through a ...
  A: Mary, I would recommend our company. The only problem is you didn't let me know where you and/or ...
safe weight mosler12/14/2010
  Q: I am trying to determine a weight of a mosler safe, ser. # 6033452 model 60331097 Measures 70" tall, ...
  A: Chuck, Mosler has been out of business for almost 10 years now. We have no access to their old ...
1904 Mosler Safe12/14/2010
  Q: I would like to have a family gathering for Christmas and have the safe opened. Can you refer ...
  A: Meredith, Unfortunately, you don't have any safe companies nearby. Most safe techs cover fairly ...
1904 Mosler Safe12/13/2010
  Q: I would like to have a family gathering for Christmas and have the safe opened. Can you refer ...
  A: Meredith, I'll need to know where you and/or the safe are located (zipcode), in order to recommend ...
4 Drawer Mosler GSA Safe12/13/2010
  Q: Andy, You responded to my prior question regarding opening my father's safe. The ID # off the safe ...
  A: Bill, If it is a Mosler container, chances are it has a MOSLER lock. This would make a difference. ...
Hall's Safe Logos/ emblems12/12/2010
  Q: I was wondering if there is a market for reproductions of original logo decals for Hall's Safes? I ...
  A: Tom, There isn't a "large" market for reproduction emblems or decals which is why no one currently ...
Excalibur gun safe not opening12/12/2010
  Q: My Excalibur gun save combo in not working... I have the Original Combo card, but for years I have ...
  A: Andy, There are only three reasons a safe lock will not operate correctly: 1. Incorrect dialing ...
diebold dial12/9/2010
  Q: I have an old large twin door Diebold safe. Can I get a replacement dial for it. if so where ...
  A: John, Diebold has been in business for over 150 years. During that time they have made hundreds of ...
Mosler repair or replace12/9/2010
  Q: I am a s cal vault tech working with a Mosler 302/402 safe lock 4 wheel key change. It is direct ...
  A: James, Lubricant is one of those subjects that EVERYONE is going to have a different view or ...
pro series safe12/8/2010
  Q: I own a pro series safe with a digital pad. The batteries died and are located inside, on the safe ...
  A: Matt, I'll need more information concerning the lock in question. Some have download ports for ...
The queen safe12/7/2010
  Q: I have a safe and all it says on it is the queen it is a floor safe can you tell me how to tell if ...
  A: Tammy, Joseph Page was probably an owner. All of the safes that I have seen that were labeled "The ...
AMCO upright cemetery safe12/7/2010
  Q: I read your response to a David regarding his safe from Jamestown, NY. Our cemetery has a very ...
  A: Dawn, Appraisals are individual. Your safe was designed as a office equipment with fire ...
Mysterious Floor Safe12/7/2010
  Q: My husband and I bought a 1959 ranch home in southern California. We pulled up the carpet to put in ...
  A: Deborah, Well, it is not a "very old" floor safe, unless you consider the late 1960's or early ...
Brinks Digital Fire safe12/5/2010
  Q: I lost the keys and combination to my safe. Is there a way to open it without ordering new keys ...
  A: Kimberly, Brinks is NOT the manufacturer, it is a company called SISCO. Brinks was just the label ...
safe12/4/2010
  Q: My husband and I recently bought a house with a hidden wall safe in it. It says Tower Sears Roebuck ...
  A: Rebecca, There never was a "Tower" safe company. These safes were manufactured and labeled for ...
used vault door12/4/2010
  Q: i am looking to add a garage to my home and am thinking of putting a vault room underneath. i am ...
  A: Dav, I think you have been looking in the wrong places. First off, most bank vault doors are no ...
cannon safe with SG key pad12/4/2010
  Q: i talked to a guy @ bonifide safe in brookfield, WI My SG key pad seems to of dropped my code & ...
  A: Jonathan, First off, I have no clue what a "level 2 tech" would be. I've been in the industry for ...
Lost Comination Directions, have numbers12/3/2010
  Q: Lost the directions for opening the safe. I DO have the three numbers in the combination, I just ...
  A: John, My first recommendation would be for you to contact the manufacturer to obtain the actual ...
The Protector Fire Safe Model#1040UL By: Sisco Safes12/3/2010
  Q: I have lost the key and combination to a fire safe I have had for many years. There is a tag on the ...
  A: Carleen, You have two choices, you can TRY to contact Sisco, or you can have a safe technician from ...
open home safe12/2/2010
  Q: I have a safe in the basement of our home that we cannot open. It was purchased in the mid 70's. The ...
  A: Doug, If you don't have the combination you WILL need a safe tech from a local safe company to open ...
Cole Safe tumbler alignment12/2/2010
  Q: I have a cole safe at least from the 60's or 70's. I cut a hole in the rear to get to the back side ...
  A: Dave, That's an awfully good picture, how big a hole did you cut? If you are just going to replace ...
S&G r6770 reset12/2/2010
  Q: Hey, we own an older building that has a Diebold vault door to our vault. The door is open but we do ...
  A: Stuart, Unfortunately there aren't alot of "safe" companies in your area. This locksmith is around ...
wards safe12/2/2010
  Q: its a 9042 serial #D-7854361-1 lost combo i bought this late seventys, need your help
  A: Leslie, Wards sold safes which were manufactured by several different manufacturers, most of which ...
S&G r6770 reset12/1/2010
  Q: Hey, we own an older building that has a Diebold vault door to our vault. The door is open but we do ...
  A: Stuart, I believe the 6770 had a case which was a copper stamping. The wheels were hand change, ...
Lock smith aid12/1/2010
  Q: I have always done my own lock work. I use to be pretty good at picking/raking a lock. Now do to ...
  A: Ed, Actually as you have mentioned most safemen DON'T use stethoscopes, what they use are ...
Adesco safe12/1/2010
  Q: I am a general contractor. I have a client who moved into a home where there is an Adesco safe ...
  A: Pete, First let me say that people do not abandon safes with stuff in them. The lottery is a ...
safe11/30/2010
  Q: Safe-Serial #26374-29......shows no model # We do not have the combination and original owner is ...
  A: Sandra, Well that makes my answer easy. Mosler went out of business in 2001, so all of their ...
safe11/30/2010
  Q: Safe-Serial #26374-29......shows no model # We do not have the combination and original owner is ...
  A: Sandra, Without knowing the manufacturer I can't be of any help. If you don't know who made the ...
Shaw Walker Safe11/30/2010
  Q: Mr. Andreasen, I received your answer a while back but I have been on vacation and am just getting ...
  A: Ralph, I would need to see a photograph to see what you are referencing. This does not sound like ...
questions on age of a macneale & urban safe11/30/2010
  Q: i am curious to the age ans value of a safe my company has recently recieved it is a macneale and ...
  A: Eric, In order to rate, identify, or evaluate your safe I am going to need pictures. Evaluation ...
can't get my safe open11/30/2010
  Q: I have an old stand alone safe that has National Lock on the dial that can't get opened. I've had ...
  A: Micky, There are three reasons that a safe lock won't open: 1. Incorrect dialing procedure, 2. ...
Mosler Safe11/29/2010
  Q: We have a safe that is part of an estate, but no one seems to have the combination. The name on the ...
  A: David, You are correct in assuming the serial number won't help. Mosler has been out of business ...
Remington Rand vault door weight11/29/2010
  Q: We plan to remove and relocate an existing Remington Rand vault door to a new location (on the same ...
  A: Al, I will need to see exactly what you have. Vault doors range in weight from around 1000 lbs to ...
1330 sentry safe11/29/2010
  Q: I just purchased a 1330 safe that has never had a combo code set. I do not have the manual could you ...
  A: Peter, All combinations are set at the factory. If you didn't receive it with the manual then you ...
locked out11/28/2010
  Q: i have a infloor hayman safe with a la guard electronic lock on it. i went to get in the safe and ...
  A: Chris, LaGard locks are very reliable locks. Changing the battery, or even letting them run out ...
HHM Safes11/28/2010
  Q: Sir, I was given 2 small HHM safes. Owners deceased. Wife had "safe smith" reset combinations 10 ...
  A: James, The index mark at around 11 o'clock is the service index we use when servicing the safe and ...
HHM Safes11/27/2010
  Q: Sir, I was given 2 small HHM safes. Owners deceased. Wife had "safe smith" reset combinations 10 ...
  A: James, Locks, much like watches, must be cleaned and serviced regularly to maintain accuracy. Over ...
Barnes Safe & Lock Co.11/27/2010
  Q: When we bought our house, we found a Barnes Safe and Lock co. Iron cast safe in the garage. I am ...
  A: Lisa, First a little history: BARNES SAFE & LOCK COMPANY (1870-1920) Pittsburg, PA ) Originally ...
Quality of Safe and size of bolt11/26/2010
  Q: I bought a used Gardall 1812 safe and was wondering how secure this safe is from break in. What is ...
  A: George, Pertaining to your ancillary question concerning a safe recommended for your valuables. ...
Parts for a mosler cannonball safe11/26/2010
  Q: I recently purchased a Mosler cannonball safe, upper being the main safe & lower for documents ( ...
  A: Gary, The "Cannonball safes" were not built for, rated for, or tested for document protection. The ...
locking a safe11/26/2010
  Q: have champion safe with s&g combo lock , can not get safe to relock after opening , handle operates ...
  A: Lynn,are you trying to "lock" the bolt work, with the door open, OR after closing the door to secure ...
Browning/Pro steel gun safe11/24/2010
  Q: I have the option of purchasing a Browning/Pro-Steel gun safe that was left in our warehouse by a ...
  A: Gary, If this is a new, in the box safe, the combination may still be affixed to the safe. If its ...
Safe11/23/2010
  Q: my friends mother was doing some cleaning and found her sons old safe. in top left corner is reads ...
  A: Ryan, Generally these safes have no value for a couple of reasons, first they do not meet current ...
RE: Victor Safe combination11/23/2010
  Q: I have an old victor safe that my husband passed away and left the thing locked up but didn't ...
  A: Sonya, Generally Yale locks dial as follows: 4 times right to the first number, 3 times left to ...
floor safe11/23/2010
  Q: I would like to know the year this safe was made and what it was and is worth. Major Safe Co. Los ...
  A: Mary, You can contact AMSEC (American Security Products), the current owner of MAJOR to find out ...
Safe11/22/2010
  Q: my friends mother was doing some cleaning and found her sons old safe. in top left corner is reads ...
  A: Ryan, These safes were made for Sears and Roebucks, while the label is "Tower", there was no Tower ...
Saga Saf-D-Posit11/21/2010
  Q: I have an old Saga Saf-D-Posit box. I have the numbers that to open it, the only issue is, I am ...
  A: Annaliza, Saga used a couple of different types of locks so I'll give you the basic dialing ...
Victor Safe11/21/2010
  Q: In an auction, my husband and I purchased a locked safe. Here is all the info we can see from the ...
  A: Denise, Hopefully you didn't pay too much for the safe!!! In its current condition it actually has ...
yale safe11/21/2010
  Q: I have a Yale safe that came with the house I bought 15 years ago. It is open but can not figure ...
  A: Bob, YALE was a lock manufacturer, not a safe manufacturer. The numbers on the back of the lock ...
Tower safe combination11/21/2010
  Q: We recently inherited my father-tin-law's house and found a Tower safe, probebly installed in the ...
  A: Arden, There was never a "Tower Safe Company" these safes were made for Sears & Roebucks by a ...
mosler safe11/20/2010
  Q: old mosler safe that is open. number on plaque on inside of mechanism inside door is 1039-37. we ...
  A: Jack, You have a couple of options to figure out the combination of the safe. First have a safe ...
combination on old safe doesn't seem to work11/20/2010
  Q: I encountered an old safe.It has four wheels. It is open. I checked the numbers set on the ...
  A: Ben, If the second wheel moves incorrectly during the dialing, this would indicate that it needs ...
Amount of hearing necessary to be a locksmith11/20/2010
  Q: Can a person with a hearing impairment function successfully as a locksmith? Can hear normal ...
  A: Andy, I don't see why your hearing would impair your abilities as a locksmith, other than normal ...
locking bracket assbly missing on Victor fire master lx11/20/2010
  Q: I was given a Victor fire master xl 4 drawer locking file cabinet. The key & lock work. However, the ...
  A: John, You have two options, you can find another similar cabinet to canibalize parts off of, or you ...
Star safe11/19/2010
  Q: I have a star floor safe model K. I can open it at the combination, but the double key lock to ...
  A: Bill, I'm assuming that you have the correct keys. They do function in a particular sequence. ...
2 different deadbolts taking the same key11/19/2010
  Q: I live in an apartment building and my mother lives in another apartment in the same building, ...
  A: Lindsay, If you don't have peace of mind its going to effect every aspect of your life. Deal with ...
2 different deadbolts taking the same key11/18/2010
  Q: I live in an apartment building and my mother lives in another apartment in the same building, ...
  A: Lindsay, First let me say that you are probably just being slightly parinoid, unfortunately this is ...
old wall safe11/17/2010
  Q: I live in house I grew up in. My dad had a wall safe. He died in 1972. My mother searched and ...
  A: Mary Ann, Unless you can travel back in time you won't be able to contact the manufacture as they ...
1867 Hall's Patent Safe11/17/2010
  Q: We recently moved this safe and in the process accidently locked it. The combination is inside ...
  A: Terrty Well, I guess keeping the combo inside the safe is about as safe as it will get, though not ...
Mosler GSA 4 Drawer Safe Open11/16/2010
  Q: I have a GSA Mosler 4-drawer (525 pounds) with an S&G mechanical combo on the second drawer. It ...
  A: Bill, As you didn't provide a photo of the dial, I'm going to assume that you have an S&G 8400 ...
COMBINATION LOCK11/16/2010
  Q: I have a Smith & Wesson combination lock gun safe. It has always been difficult to get into. I'm ...
  A: Tommy, In order to answer your question I will need to know what bolt work and lock you currently ...
Protectall Safe11/16/2010
  Q: I have a safe in my possession that I'd like to know more about. It's olive green. Dimensions of ...
  A: Gee, Basic History: PROTECTALL SAFES (1930’s to 1949) In the 1930’s a successful Syracuse retailer ...
Victor safe opening11/15/2010
  Q: I have an old F. Palazzolo HEAVY safe from Victor Safe & Lock Co. A friend and I tried to drill it ...
  A: Jeff, Try World Wide Safe & Vault - 800-932-2278 www.worldwidesafe.com - They are in Miami and ...
Victor safe opening11/15/2010
  Q: I have an old F. Palazzolo HEAVY safe from Victor Safe & Lock Co. A friend and I tried to drill it ...
  A: Jeff, hopefully you have learned your lesson about using friends to open safes - if not when you ...
combination rotation11/14/2010
  Q: picked up a USCAN UC-1310! when doing the combination on what I received, you turn to right 4x to ...
  A: Jody, No and No. When the safe was locked up the lock was "cleared". Also, there is no reason to ...
lock out royal safe11/14/2010
  Q: royal electronic safes inc my safe can be lock with a 4 to 6 number or with any card with a magnet ...
  A: Robin, I have a couple of listings for this company, both in Florida, though I believe the first ...
combination rotation11/14/2010
  Q: picked up a USCAN UC-1310! when doing the combination on what I received, you turn to right 4x to ...
  A: Jody, Many times people write down the combinations the way they understand them, not necessarily ...
Hall's Safe and Lock Co dialing procedure11/14/2010
  Q: I have inherited a Hall's Safe. I have the combintations, but do not know the procedure to use the ...
  A: Erick, As Hall's Safe & Lock Company merged with the Herring Safe Company and the Marvin Safe ...
mosler safe11/13/2010
  Q: I have a mosler safe serial# 24624-551, model# 13. Could you tell me anything about this safe, and ...
  A: Kip, Sorry but serial numbers only mean something to the factory. If for instance you liked your ...
Vanguard vs-150 safe11/12/2010
  Q: I lost the combination to my Vanguard vs-150 safe. I have the serial number. I contacted a ...
  A: Susan, VanGuard was not a manufacture. It appears that they were simply a distributor, relabeling ...
Brinks safe electronic entry dead11/10/2010
  Q: The LCD display of my Brinks home safe went dead. I first thought it was the battery. But after ...
  A: Jay, Brinks was originally a Sisco product, trademark. Sisco is currently marketed in the US under ...
Yale cabinet lock11/10/2010
  Q: I have two oval yale locks that had to be drilled out of a Victor Firemaster file cabinet. The ...
  A: Robert, You should be able to get replacement lock cylinders from your local locksmith shop, though ...
star safe combination11/10/2010
  Q: Andy, I have a star safe Model #1100. It has a key and a dial. Do not have the combination. Is ...
  A: Carol, I take it your safe is a small Fire Safe type of container. All of the Star records prior ...
Royal safe / changing combination11/9/2010
  Q: This is a receipt for a question you recently asked at allexperts.com of Lynn Chambers.  You should ...
  A: Michelle, This kind of a confusing email, I'm assuming that you originally asked the question of ...
Lost Key11/8/2010
  Q: Greetings I have a Brinks safe model 5055 na me astray which key number is 3532. As I can get ...
  A: Rafael, Sisco manufactured the Brink fire safe product line, which is now known as Honeywell. If ...
mosler Mr302 combo lock11/8/2010
  Q: I have a Mosler MR302 that I cannot figure out how to remove the dial. I have the back off and there ...
  A: Jim, It has a spline key, but it probably isn't what you are use to looking for. Mosler used two ...
Combination lock stopped working yesterday11/8/2010
  Q: I have a Gardall safe with a spin combi lock. This unit is about 2 years old. I use it on a daily ...
  A: David, it means that it needs service. Do not close or lock the door until you have it serviced. ...
Combination lock stopped working yesterday11/7/2010
  Q: I have a Gardall safe with a spin combi lock. This unit is about 2 years old. I use it on a daily ...
  A: David, There are ony three reasons a lock will not open: 1. Incorrect dialing sequence, 2. ...
cannon safe11/7/2010
  Q: Saw this was free so thought I would send a question. Yesterday, someone got into my sons home and ...
  A: Jan, I included the Cannon Warranty for you to read! If this was a burglary attempt, Cannon WILL ...
Star safe wont open11/7/2010
  Q: I have a Star floor safe Ser. No. 239548 no Mod. No. on tag . It has a round lid , safe has rounded ...
  A: Don, Explosives are always nice, especially if you are getting frustrated! There are only three ...
Remington Rand Safe-file, stuck drawers11/6/2010
  Q: I have a Remington Rand Safe-File with two drawers (file cabinet size). It is probably forty or more ...
  A: Lok, Remington-Rand quit manufacturing safes when the safe division was closed down when they were ...
safe removal11/6/2010
  Q: I am thinking about renting a retail space, but there are 2 large safes there. They are about 5 ...
  A: Christopher, I would have to see the safes to answer your question, but generally the answer is ...
mosler safe11/6/2010
  Q: can you tell me anything about this mosler safe. do not have key's or combination's.number on safe ...
  A: Kip, Based on your serial number your safe would be from the late 1950's or early 1960's. This is ...
cannon safe11/6/2010
  Q: Saw this was free so thought I would send a question. Yesterday, someone got into my sons home and ...
  A: Jan, Bringing another keypad will NOT open your safe. The codes are held inside the lock, the ...
Early 80's Montgomery ward safe-cant remember combo11/6/2010
  Q: Terry--I have a model # 9017 safe i bought from Montgomery wards in 1983--serial 78-86960--i can ...
  A: Ron, Many of the Montgomery Wards safes were actually built by Meilink, your serial number confirms ...
safe bolt does not retract11/6/2010
  Q: Brand: Sentry, Model: 83803, Serial # AJ832796 Had difficulty opening the safe so I ...
  A: Mariet In order to retract the locking bolts, the combination has to be entered. If the lock does ...
Old Mosler Safe11/5/2010
  Q: Our place of business is closing and we have an old Mosler Safe. Is there anyway we can find out ...
  A: Susan, Your safe would probably have been built between 1975-1980. It is a fire resistive safe ...
old safety deposit boxes w/ Yale&Towne locks11/5/2010
  Q: I recently acquired a set of 2 safety deposit boxes with 12 locking boxes each. 6 of the boxes have ...
  A: Jody, Generally these are obsolete locks. Incorrectly drilling them open will result in dead or ...
Hall's Lock and Safe Co.-floor safe11/4/2010
  Q: We are selling our family owned business and this safe has been in the back of the store for the ...
  A: Cindy, Looking at the photo I notice that two hinge acorns are missing, one on each lower hinge. ...
Safe 2811/4/2010
  Q: I have a safe28 that i bought at auction , i have no combination and no key / the battery is flat ...
  A: Keith, Your safe is probably an Asian imported safe. If you don't have the manufacturers name, ...
Found an old safe.11/4/2010
  Q: When a tennant moved out I discovered an old safe in a building I own. It has a yale combination ...
  A: Nick, Chances are the manufacture is no longer in business, so contacting them, even if we ID your ...
Shaw Walker Fireproof File Cabinet11/3/2010
  Q: I've worked on Shaw Walker fireproof file cabinets before, and usually they have the type of lock ...
  A: Artie, Sorry, but I specialize on safes and vaults, not file cabinets and/or office equipment. ...
Lost Key11/3/2010
  Q: A volunteer accidently locked a file cabinet, sorry to say we had lost the key. I have the lock ...
  A: Marci, Sorry, I only work on safes and vaults. Without a manufacturer's name, I can't point you ...
meilink safe11/2/2010
  Q: I have an olds wards safe that was my uncles. I have the combo with the times left then 3 right etc. ...
  A: Michelle, The dialing procedure will depend on the actual lock in the safe. Standard dialing ...
Difference between Amsec and Duravault11/1/2010
  Q: I got a couple questions for you that requires your expertise, I hope you can answer them 1) I was ...
  A: John, Both safes have: 1. six sided composite construction 2. active locking bolts open side and ...
safe10/31/2010
  Q: I purchase a home and found a Mosler Wall Safe. The number on it is 14048-369. Something is inside ...
  A: Tim, Mosler went out of business in 2001, so there is no way contacting tme to obtain the original ...
Brinks Home Safe10/31/2010
  Q: I have the keys to the safe but, I believe the combo is locked in the safe. H0w can I get or reset ...
  A: Richard, Your safe is a combo AND key required access. If you don't have the combo then you may ...
Halls Patent Safe10/31/2010
  Q: Trying to determine the age of my Halls Safe. Serial number on the handle is 67096. On the inside ...
  A: Steve, Your safe would have been built between 1880-1881. In the mid to late 1800's there was a ...
LG basic II lock10/30/2010
  Q: in a past answer you expressed a strong positive vote for a LG basic II lock and I have been looking ...
  A: Charles, As you didn't really "pose" a question, I'll assume that you just wanted a reflection of ...
R670010/30/2010
  Q: I have a Liberty safe with the SG R6700. I am changing it to an electronic. how do I separate the ...
  A: Doug, When you open the back of the lock you will notice a drive cam or wheel, which is directly ...
LG Digital keypad lock10/30/2010
  Q: I have a Theft Gard safe with the above lock on it. Worked fine yesterday but cannot get it to open ...
  A: Sherry, Sorry, but I don't buy the helpless female thing - I've got a wife and two daughters so I ...
loccked safe10/30/2010
  Q: how can I open my locked electronic safe? I cannot remember the code & cannot find my instruction ...
  A: Avril, The original factory code would have been 159A. If the code has been changed or if the ...
safe combination10/29/2010
  Q: When I bought my house there was a vintage floor safe in the basement. The is door open and the ...
  A: Jed, In order to help you, first thing is I need to know what you have. As long as the safe is ...
Adesco in-floor safe10/28/2010
  Q: I have had this safe for just four years, bought it new, and have probably opened flawlessly 40 ...
  A: Bob, Generally there are only three reasons that a safe lock will not open: 1. Incorrect dialing ...
how to change the pw to open old safe10/28/2010
  Q: i have a realy old pro series safe it is about 10X10X14L it has 10 buttons 2 rows of 5 numbered 1 to ...
  A: Mary, With the door of the safe open, there should be a small button on the back cover. Pressing ...
Opening an antique Cary Safe with a known combination10/26/2010
  Q: I purchased a Cary Safe that has a personalized inscription that says M. S. McGrew M. D. I have the ...
  A: David, Cary Safe's used a number of different styles of locks over the years. Based on your ...
Star Safe Without A Key10/25/2010
  Q: Terry, I work at a non-profit organization that recently received a donation of a Star Safe from a ...
  A: Peter, I'll need the serial number of the safe (should be around the lower right hand corner of the ...
Browning safe won't lock10/25/2010
  Q: I have a Browning safe with a SG electronic lock and it won't lock.
  A: Brian, Sounds like you may have a lock failure. DO NOT CLOSE AND LOCK YOUR SAFE DOOR UNTIL AFTER ...
Keep/Safe problem10/25/2010
  Q: I have a wall safe in my office to which I recently found the combination for. The only information ...
  A: The brand is probably Sentry Safe see: http://www.sentrysafe.com/Products/172/KS0130_KEEPSAFE The ...
caryco safe10/25/2010
  Q: Terry, Ihave a cary co safe with Ibelieve a C5lock w 4 numbers in the combo. The safe was opened ...
  A: Mike, Generally, Cary Safes with a dial that has the Sept. 16th, 1890 patent date will have a ...
Data safe diebold10/24/2010
  Q: I have aquired an old R-5425 safe. The door is open and I am trying to figure out the combination. I ...
  A: David, the dialing sequence for your lock is: 4 times left to the first number, 3 times right to ...
Lost Key for Victor "Treasure Chest" Safe10/24/2010
  Q: we lost the key to the safe and would like to know how we can get it opened. Took it to a locksmith ...
  A: Herbert, I have no idea what you are referring to as a "Treasure Chest" safe. This is more of a ...
Sisco Model 1050 safe10/23/2010
  Q: I just bought a Sisco Model 1050 safe, serial #008847, key #3443 at a neighborhood garage sale. It ...
  A: John, If the keys don't act as an override to open the safe, then you may need a safe technician to ...
Difference between Amsec and Duravault10/23/2010
  Q: I got a couple questions for you that requires your expertise, I hope you can answer them 1) I was ...
  A: John, First rule - use the correct terminology so that we are both speaking apples and apples. ...
Sentry 6330 tumbler wheel broke10/22/2010
  Q: The combo wheel of my Sentry 6330 broke off recently. Its plastic shaft where it enters the face of ...
  A: Ted, While I can't speak for the locksmiths in your area concerning fees or even their ability to ...
Change key10/22/2010
  Q: Where can I get a 6720 change key for a Mosler MRK-302 lock?
  A: David, You can't get a 6720 change key for a Mosler MRK-302 lock, because the 6720 change key is ...
Old Hall's Safe Restoration / History10/20/2010
  Q: Terry, I recently aquired an old Hall's Safe, aside from the bad latex paint all over it, its in ...
  A: John, Based on the serial number (81698) your safe would have been made around 1878-1880. I will ...
Shaw Walker Safe10/19/2010
  Q: serial # 23333 Do you have any idea when this safe was manufactured? It has been in my business ...
  A: Tom, Shaw-Walker began in 1903. It changed its name to S&W Manufacturing Inc., when all assests ...
Star Safe10/19/2010
  Q: I have a star safe in my building and cant find the combo, how do I open it? Model C17 floor safe ...
  A: Jorge, If the serial number is "AFTER" 370000 we can check with the factory to recover the original ...
how to unlock a safe10/18/2010
  Q: i bought a safe from a auction and i do not even know the combination or anything
  A: Trent, If you can't get a combination from the previous owners then you will need a safe tech from ...
McNeal & Urban safe10/18/2010
  Q: How can I determine the age and any history associated with a McNeal & Urban safe that I have?
  A: Carlos, I will need to see your safe in order to determine its age. In order to identify, evaluate ...
opening an old john d bush safe10/18/2010
  Q: how do i open this safe i have the combination and the number of turns per number but i must be ...
  A: Jody, If it is a hinged upright safe, like a fire safe, then the dialing sequence will either be: 4 ...
How do I access safe without combo or key?10/18/2010
  Q: My father has a TSS E3N Safe. He can't recall the combination and we can't find the override key. ...
  A: Jacqueline, I would have to see the safe you are refering to. The TSS series of safes is ...
Major RT40 safe10/18/2010
  Q: Ihave a chance to aquire this safe is it fire resistant it apears to be solid steel what is weight, ...
  A: Dan, If the safe is fire resistant, then it isn't solid steel. I'm not sure what numbers you are ...
Cole-steel safe10/18/2010
  Q: I have read in a previous answer of yours that Cole-steel did not make safes but steel office ...
  A: Robert, I have seen a couple of safes with the "North American Safe Association" labels - there ...
Opening a Safe10/18/2010
  Q: I need help opening my Acme Safe. I have the 4 number combination but don't understand the ...
  A: Sharon, The dialing sequence should be: 4 times left to the first number, 3 times right to the ...
safe deposit keys10/17/2010
  Q: What do safe deposit keys typically look like? Thank you.
  A: Bridgett, Generally, Safe Deposit Keys are a flat key, but there are several manufactures which ...
opening my safe10/17/2010
  Q: I have an old steelmaster safe about 14 wide by 20 high on wheels, locked when I got it, owner lost ...
  A: LARRY, Steelmaster is a brand name for some products manufactured by MMF Industries. If you have a ...
Need a safe tech10/17/2010
  Q: Do you know of a reliable safe tech in north Louisiana? My grandparents have a Cary safe that they ...
  A: Sterling, Unfortunately there aren't alot of safe techs in your area. You can try: E. C. Mitchell ...
Old Hall's Safe Co. safe10/16/2010
  Q: I have the 4 number combination to an old Hall's Safe Co. safe that I cannot open. I am wondering ...
  A: Brad, The dialing sequence should be: 4 times right to the first number, 3 times left to the ...
triple time-delay locks10/15/2010
  Q: I just have a general question about time-delay locks. Say a safe has three time-delay locks, two ...
  A: Becky, First off, lets get the terminology straight so that we are talking apples and apples, not ...
safe com10/14/2010
  Q: it is 5 ft tall 4 ft wide with double doors with t handles on both doors in com i was gave is R3 ...
  A: Tim, The dialing sequence should be: 4 times right to the first number (19) 3 times left to the ...
Safe question10/14/2010
  Q: I have a safe. Age is unknown. Combination is unknown. The safe is currently open, however the ...
  A: Patrick The SMNA label indicates what type of safe you have. The "Spec F1D" indicates that it is ...
Weight of a safe10/14/2010
  Q: Our business has a Mosler safe Model 11, SN 19047-5 which is almost a cube size, dimensions are 22" ...
  A: Betty, Unfortunately Mosler has been out of business for almost 10 years now, so the serial number ...
old mosler safe10/14/2010
  Q: We have an old Mosler safe here at work that no one can find the combination for. It is a serial ...
  A: Doug, Mosler safe went out of business in 2001. Generally all the mosler safes shipped out after ...
Opening Schwab Safe10/13/2010
  Q: Terry: can you recommend a safe man in Fairfield county, CT area to open an older Schwab safe Model ...
  A: Dave, Here are a couple companies in your area. While there may be several more smaller companies, ...
old mosler's safe10/13/2010
  Q: I just purchased an old Mosler's safe at my neighbors garage sale. The ironic thing is, it may have ...
  A: David, Not only was it an option to paint the name of the original purchaser, it was a standard ...
S&G wont open - low battery sound10/13/2010
  Q: I have a safe with a electronic S&G lock. I do not know the actual model but keypad has two ...
  A: Erik If your lock is indicating a low or bad battery, I would check the battery or install a new ...
Mosler safe locked by accident10/13/2010
  Q: There is an old Mosler safe in my parents basement that has sat unlocked for years and accidently ...
  A: Paul, So, I'm assuming that your question would revolve around finding a combination for the safe? ...
Very old Marvin Safe -- no combination10/12/2010
  Q: We have a very old floor safe made by the Marvin Safe Company of New York -- we believe it's from ...
  A: Chris, Anytime a lock or safeman indicates the words "ruin" or "destroy" in a conversation about ...
safe won't open10/10/2010
  Q: I have a cannon safe Model AE22 and the locking mechanism is jammed. I enter my electronic code and ...
  A: Jon, Electronic locks either work or they don't. If the lock isn't working you WILL need a safe ...
Schwab safe10/10/2010
  Q: I have older, large (17"W, 23"H, 20.5"D) Schwab safe, have the combo., and have used it for years. ...
  A: Pat, First question I have is: "when was the last time the lock and safe were serviced". I would ...
Liberty Safe with S&G Pulstronic Keypad10/10/2010
  Q: Andy, I have an 8 year old (about) Liberty safe with an S&G 2000- 100 Pulstronic lock. Last year I ...
  A: Jay, This lock wasn't used for more than a few years because it wasn't a really good idea, so there ...
Brinks Safe - Lost Key & Directions10/9/2010
  Q: I lost the key to my Brinks home floor safe. To make matters worse, I don't remember the ...
  A: Donna, Explosives are always a good choice, though they are messy and most states have outlawed ...
Mislaid key for Kingavon 28 dig. safe10/9/2010
  Q: I have mislaid the override key for my Kingavon 28 safe. Do you have any idea where or how I get a ...
  A: Stephen, Kingavon was not a manufacturer of safes, they were simply a seller of "stuff". The safes ...
sentry valueguard safe model 131010/8/2010
  Q: I am a beginning lock smith and have been given a 1310 safe to practice on I would lake to know if ...
  A: Dale, First off, Sentry Safes do not use standard safe locks, they use a lock we refer to as "X" ...
Montgomery Wards # 9031 Safe10/8/2010
  Q: Does this safe have any fire rating?
  A: Larry, If the safe has a UL tag on the safe for fire resistance, then "possibly", if not then no it ...
LaGuard 360010/8/2010
  Q: How many user does Laguard 3600 take? Thx Kathy
  A: The LaGard 3600 will take as many users as you need, as long as they all use the same code. Sorry, ...
Key identification10/8/2010
  Q: My father recently passed and I am familiar with all his keys, safety deposit boxes and safes.. ...
  A: Valerie, The key is a european key, it appears to be a Kaba-Mauer. While the manufacture may have ...
key for victor fire master ln10/7/2010
  Q: where can i get a key copied for the victor fire master I have one key but would like to have an ...
  A: Rick, as Victor has been out of business for quite a few years, contacting them is going to be ...
Antique Southern California Safe Co. Safe10/7/2010
  Q: I've had this safe for year's, I looked up the company, they have been makin' safe's since 1915. I ...
  A: Anthony, This is why you contact an expert for evaluations instead of trying to do it yourself. ...
Twist knob rotates freely - can't open the safe box!10/6/2010
  Q: I've got a LockState LS-35D and can't open it. PIN is correct but the twist knob seems to be broken ...
  A: Alex, If the "twist knob" is spinning as you report, it has probably been forced and has sheared ...
MEILINK 9031 SMALL SAFE10/6/2010
  Q: DOOR IS OPEN. COMBO IS 43 28 40 AND HAS BEEN FOR 10 TO 20 YEARS PLEASE GIVE ME THE CORRECT SEQUENCE ...
  A: Andy, The dialing sequence for your Meilink should be: 4 times left to the first number (43) 3 ...
Wondering how much it's worth.10/5/2010
  Q: I've inherited this safe from my father-I had to have the door drilled into in order to open it. It ...
  A: David, In order to identify, evaluate or appraise your safe, I'm going to need photos. They should ...
unlocking home safe10/4/2010
  Q: Andy, My father has two safes, a Montgomery Wards 9001 and a Vanguard 2.0. He thinks they are ...
  A: Lori, When you lock the door and spin off the combination it is ready to go. Extra spinning to the ...
unlocking home safe10/4/2010
  Q: Andy, My father has two safes, a Montgomery Wards 9001 and a Vanguard 2.0. He thinks they are ...
  A: Lori, These were "inexpensive" document safes. Depending on the lock that was installed the ...
Old Vulcan? floor safe10/3/2010
  Q: I have an old floor safe with rollers that I am assuming is a Vulcan model. The script on it is ...
  A: Joe, First never "assume" anything. In order to open the safe without destroying it, the safe ...
Opening my excalibur gun safe10/2/2010
  Q: I have not open my gun safe this year. I know the combination, but not able to open it. Not sure if ...
  A: Dan, The standard dialing sequence is: 4 times left to the first number, 3 times right to the ...
floor safe10/2/2010
  Q: ok my father in-law and I bought a new property and it has an old floor safe. It is a combination ...
  A: Chad, Explosives would probably work, but then you would have to replace a portion of the house ...
locked safe10/2/2010
  Q: My grandfather's safe has been locked for over 50 years and no one in the family knows the combo. I ...
  A: John, First, why would you assume that a safe "has to be destroyed" in order to open it? ...
Remington Rand Safe File10/1/2010
  Q: I have a Remington Rand Safe File Cabinet I would like to get rid of. I purchased it form someone in ...
  A: Ron, You can advertise it on ebay or craigslist, but it doesn't have much value. I would check ...
Victor Patent Safe9/30/2010
  Q: We were given as safe from Victor Patent that is locked up because the people who had it do not ...
  A: Mandi, Manufacturers NEVER, EVER, EVER released or published records of combinations which were set ...
mosler9/29/2010
  Q: i have a mosler safe. it has a drop slot it came out of a old store. #12819-26 is only number on it. ...
  A: Fleet, All Mosler safes built during the last 40-50 years left the factory set on 50-25-50. The ...
Star Safe Locked Out9/28/2010
  Q: I have a large Star Safe mid 80's I think. I need someone to make a key and new combination. I ...
  A: Lin, I assume that you are referring to a free standing small fire safe, as opposed to a round ...
fire proof safe shaw walker9/27/2010
  Q: the safe was free. from my supplier. No combo. door closed. 2'x3'6"x2' w-h-d-. brass tumbler & ...
  A: Mike, Your supplier should have paid you to haul it away! Getting a locked up container like this ...
york filing cabinet keys9/27/2010
  Q: The key to our York Fireproof filing cabinet have been lost (misplaced). It is a 4 drawer cabinet ...
  A: Les, You have one of two options for this obsolete piece of office equipment. First you can have a ...
Vanguard 2.0 Home safe9/26/2010
  Q: Bought safe from Sears 25+ years ago. Works great. No combination problems. Lost the paperwork. I ...
  A: Larry, If your safe is the one in the photo that you have included, it appears to be a Meilink Fire ...
Hall's Standard Safe9/26/2010
  Q: We came upon this safe - on the back of the safe is the phrase "Hall's Standard Safe". The logo of ...
  A: Teresa, This web site will only allow one photo at a low resolution. As I stated before you need ...
frontier safe9/25/2010
  Q: i just found this page and really hope you can help me out. my safe has a s&g lock i believe it a ...
  A: Will, Unfortunately mechanical problems tend to be hands on problems. As I don't have the safe ...
safe value9/25/2010
  Q: I have an old national lock company, Rockford, Ill. USA combination lock safe. It is square, ...
  A: Jackie, I'll have to see what you have in order to evaluate it. In order to identify, evaluate or ...
Vanguard 2.0 Home safe9/25/2010
  Q: Bought safe from Sears 25+ years ago. Works great. No combination problems. Lost the paperwork. I ...
  A: Larry, The safe should have a UL label in the safe which indicates the level of protection the safe ...
combination lock sequence9/25/2010
  Q: I have combination but I don't know which way or how many turns. Lock is an ILCO Unican 3 number ...
  A: Norman, The dialing sequence for this lock is: 4 times left to the first number, 3 times right to ...
Hall's Standard Safe9/25/2010
  Q: We came upon this safe - on the back of the safe is the phrase "Hall's Standard Safe". The logo of ...
  A: Teresa, Two separate issues: First; In order to identify, evaluate or appraise your safe, I'm ...
Kingavon Safe30 won't accept my code9/24/2010
  Q: My Kingavon safe30 all of a sudden won't accept my code. The lights still flash and it still beeps ...
  A: Gary, Kingavon is not a manufacture of safes, they are a seller or distributor of "stuff". The ...
bought a used bernardini safe9/23/2010
  Q: I bought a used bernardini safe at an auction of course It was purchased without key or combination ...
  A: Melinda, Ok, thats a good answer. So if it costs you $1000 to $1500 to get the safe opened and ...
Old Diebold safe lock replacement9/23/2010
  Q: Our church has a very old Diebold safe ( maybe 60x48x24) and the combination lock has fallen apart ...
  A: Michael, Unfortunately, you have made several errors. I'll start with the first one, when you say ...
Film Vault File storage room door dial locked9/23/2010
  Q: I am trying to shoot a short film about a heist and I am using an old film storage vault as a ...
  A: Cyndi, Sorry but you are going to have to bite the bullet and call in a safe technician to get the ...
Sargent Greenleaf R67009/23/2010
  Q: I have a Gardall safe that has the door open but the mechanisim locked and I don't know the ...
  A: PJ, First off I would like to recommend that you have a safe technician reset the lock so that you ...
Carey Safe, transporting9/23/2010
  Q: My wife has inherited an old Carey Safe, 31"w x 25"d x 46"h and weighs 1,525 lbs. I'll have a 3/4 ...
  A: Ted, First question would be - do you have a combination? If not tape the dial in the "UNLOCKED" ...
GSA 4 Drawer Safe Won't Open9/22/2010
  Q: I have read your replies about only 3 reasons a safe won't open. I know my combination. I am ...
  A: Gary, The only one of the numers that can be affected by being in the forbidden zone would be the ...
HOW TO OPEN MY DIEBOLD SAFE9/22/2010
  Q: I HAVE DIEBOLD SAFEWIL SERIAL NUMBER 035-169352602 I BOUGHT IT ON EBAY THE COMBINATION IS TURN L 5 ...
  A: Tamesh, There are only three reasons a safe lock will not open: 1. Incorrect dialing sequence, 2. ...
GSA 4 Drawer Safe Won't Open9/22/2010
  Q: I have read your replies about only 3 reasons a safe won't open. I know my combination. I am ...
  A: Gary, You didn't mention whether you have a mechanical lock, or an electronic lock on your ...
padlock9/21/2010
  Q: I was wondering if you could provide my some information regarding a padlock I have. It is labled ...
  A: Ed, Sorry, but this is not my field of expertise. I specialize in safes & vaults, and specifically ...
mosler 302 locking dial9/21/2010
  Q: our church has a mosler safe. i have identified the lock as a mosler 302. the dial has a lock ...
  A: Richard, I'll have to check tomorrow to see if I have any lock cylinders for Mosler dials. In ...
bought a used bernardini safe9/21/2010
  Q: I bought a used bernardini safe at an auction of course It was purchased without key or combination ...
  A: Melinda, You know the saying about the definition of a boat being a "hole in the water into which ...
Shaw Walker Fire File9/20/2010
  Q: I am looking for a replacement handle for a Shaw Walker Fire File drawer, It is 3 5/8" from center ...
  A: Lavon, Shaw-Walker is now S&W Manufacturing (a SMEAD Company). Their number is 800-845-8350. I ...
mosler 302 locking dial9/20/2010
  Q: our church has a mosler safe. i have identified the lock as a mosler 302. the dial has a lock ...
  A: Richard, The locking cylinder in the dial was designed for dual custody. If you are not using it ...
Found Safe9/20/2010
  Q: its says in the middle Security Wall Safe Co. Boston, MA he passed away many years ago and there is ...
  A: Heather, While it isn't an antique, it is a collectible. It does not meet current standards for ...
Valuation of Safe....9/20/2010
  Q: I have a HALL'S SAFE CO cafe in my basement that has an april 3, 1906 patent on the back of the ...
  A: Greg, As you have noted, the 1906 date is the "Patent" date, and has nothing to do with the ...
herring hall marvin safe9/19/2010
  Q: I have a safe that was found in a local store my parents just bought in town, it is very nice and i ...
  A: Gilberto, I'm going to have one of my service technicians try to help you. Andy Buenos dias ...
Found Safe9/19/2010
  Q: its says in the middle Security Wall Safe Co. Boston, MA he passed away many years ago and there is ...
  A: Heather, Here is the basic history for this company. There were actually two companies making ...
Combination to open safe9/18/2010
  Q: I am trying to help a friend with this Baum safe. It has a Yale safe lock, combination is not known. ...
  A: Patricia, Due to security and liability reasons we do not give out opening or drilling instructions ...
Unknown combination9/17/2010
  Q: I have a Mialink safe that my sister gave me. She has lost the combination and can't remember it. ...
  A: Ken, The serial number should be on the right side of the safe, near the top hinge. You can ...
Safe9/17/2010
  Q: What type of safes are these 2?
  A: Luis, As you didn't give me any information or attach photos, I'm kind of at a loss. In order to ...
Floor Safe question9/16/2010
  Q: We just purchased a home and found a Floor Safe in one of the walk in closests. The Brand is NONVV ...
  A: Rick, You've got me on this one! I'll need to see pictures of the safe to figure out what you ...
Safe9/16/2010
  Q: I am thinking about purchasing a safe that somebody has for sale, they say it is a keepsafe as that ...
  A: Luis, The safe appears to be a "Sentry" safe. It is designed for fire resistance and protection ...
sesamee 3-wheel safe9/16/2010
  Q: I have a house with I think is a 1930s sesamee 3-wheeled wall safe, very rusted, the wheels don't ...
  A: Bob, Generally mechanical problems are "hands on problems", if I can't touch it, then I'll have to ...
Star Safe9/15/2010
  Q: I have a Star safe from American Security Products Co that must weigh ~500 lbs, sits on the floor ...
  A: Larry, Star was not originally an AMSEC product. AMSEC acquired the company in the late 1970's or ...
question9/14/2010
  Q: It is about Rosengren Atlantic52 grade 2 or 3.It has an electronic safe lock la gard with lost ...
  A: Ognian, First off, LaGard locks do not have a manufacturers code to restore the lock if the ...
Combination9/14/2010
  Q: Can you help me with a lost combination? I bought my Safe/Keep about 35 years ago. Thank you. ...
  A: Jim, I'm going to need more information off of the safe, like a manufacturers name, model and ...
Cannon Safe keypad9/14/2010
  Q: My husband changed the code to our 2004 Cannon Executive Safe before we left on vacation. We just ...
  A: Chris, Unfortunately, if Cannon doesn't have the info, and you don't have the correct combination ...
cary safe9/13/2010
  Q: i have a Cary safe that belonged to my grandfather. It has a number on the handle which reads 1123. ...
  A: Dawn, Are you talking about the wheels of the safe, or the wheels in the lock? The Yale locks ...
sentry safe9/12/2010
  Q: I have an older sentry safe, I have the serial #, but i dont know the model #. The manufacters web ...
  A: Joshua, saying that the safe is between 30-50 years old narrows it down to several thousand ...
Shaw Walker won't open9/12/2010
  Q: I had my Shaw Walker open yesterday, but it won't open today. I've been leaving it with the S&G ...
  A: Tom, You might also try: Hamilton Safe of NE 402.397.8890 12875 Deauville Dr Omaha, NE 68137 I ...
Shaw Walker won't open9/12/2010
  Q: I had my Shaw Walker open yesterday, but it won't open today. I've been leaving it with the S&G ...
  A: Tom, Don't worry about a "starting position", this is mainly for people who can't understand the ...
Shaw Walker won't open9/12/2010
  Q: I had my Shaw Walker open yesterday, but it won't open today. I've been leaving it with the S&G ...
  A: Tom, Calm down, First thing is we have to be speaking the same language, or calling parts by their ...
yale combo lock parts9/12/2010
  Q: I have a series 30 or 40 yale combo 3 number lock. i am looking for a drive gear, by this i mean, ...
  A: Kaleb, Yale has not made safe locks for probably 20-30 years. I don't have a date when they quit ...
Real low battery9/12/2010
  Q: I can't open my safe because it says the battery is low.It is a Sentry Safe the model # is V560 ...
  A: Asonia, I recommend that you contact Sentry's customer service. Sentry Group 900 Linden Ave, ...
1880'S DIEBOLD INNER LEVERLOCK9/11/2010
  Q: ANDY..I MISPLACED THE KEY TO INNER DOOR OF OLD DIEBOLD...STILL LOOKING FOR IT. SIZE IS ABOUT 2' ...
  A: Rob, If you or for that matter the locksmiths drill the lock, you will probably be left with a ...
Two Safes, one locked w/out Combo9/10/2010
  Q: Andy, Hi, I saw your e-mail in one of the many websites I have been researching on for my two ...
  A: David, I'm not sure what "Try-outs" you are referring to as there are no factory "listed" try outs. ...
Kingavon electronic safe9/9/2010
  Q: Hy. I have just bought a caravan with a kingavon electronic safe 27 installed in it.Dealer didn't ...
  A: Marie, Send me a photo of your safe, so that I can see what you have. Generally, if the safe has a ...
Lost combo for an old Meilink Hercules safe9/9/2010
  Q: I am trying to save a safe and help a customer, they have an old Meilink Hercules serial #s-3996 ...
  A: Jerry, While I have a couple of options for you, all of them are going to require proof of ...
Value of HHM safe9/8/2010
  Q: We were broken into and our HHM Safe # 188268 was destroyed. We are trying to find the value of ...
  A: Shawna, HHM was in business from 1892 until they were acquired by Diebold and then closed in 1962 ...
Kingavon electronic safe9/8/2010
  Q: Hy. I have just bought a caravan with a kingavon electronic safe 27 installed in it.Dealer didn't ...
  A: Marie These are imported safes - Kingavon is not a manufacture, they are a distributor of "stuff", ...
How many wheels in my Mosler safe lock?9/8/2010
  Q: I bought an old home which has a dusty Mosler safe in the garage. I don't have the combination and ...
  A: James, In almost 40 years, I can literally count on ONE hand the number of abandoned safes that I ...
50 yr old safe9/7/2010
  Q: I have a 50 year old safe that requires a combination and key to open and have neither. It is @ 3ft ...
  A: Bob, answer to question 1 - yes and maybe answer to question 2 - if the safe is locked up, you are ...
lost combination for "keep safe" safe9/7/2010
  Q: Andy, our "Keep Safe" safe is locked and we lost the combination.We purchased this safe back ...
  A: Chuck, John D. Brush is the parent company of the Sentry Safe Company (or Sentry Group). ...
Royal Safe Error Code9/7/2010
  Q: Hey Terry, I have a Royal Safe and I just started getting this error code when putting in the ...
  A: Steve, The first thing I need to do is ID what you actually have. There are a couple of companies ...
Yale safe9/7/2010
  Q: I have just taken passion of a old Yale safe with the casters turned sideways. It is about 30 inches ...
  A: Mike, Well the first thing we need to do is to ID your safe. Yale was a lock manufacturer, not a ...
star safe mod c5 ser 104909/6/2010
  Q: I have the combination but can't open the safe. I think I may have forgotten the sequence. Any help ...
  A: Steve, The correct dialing sequence is: 4 times left to the first number, 3 times right to the ...
HOW TO OPEN MY DIEBOLD SAFE9/6/2010
  Q: I HAVE DIEBOLD SAFEWIL SERIAL NUMBER 035-169352602 I BOUGHT IT ON EBAY THE COMBINATION IS TURN L 5 ...
  A: Tamesh, Read the complete answer before dialing your combination, if one method doesn't work the ...
mosler safe co9/3/2010
  Q: I have a mosler safe I inherited from my deceased father in law. It came with a combination to open ...
  A: Kevin, Forget the "zero" this just adds to confusion. Generally when most people write down the ...
1916 Mosler Three Lock Timer9/2/2010
  Q: There is an old lock timer identified above in my collection of stuff that I'd like to get rid of. ...
  A: Tommy, This item would possibly be a collectors time piece. I only deal in safes, vaults and ...
diebold safe9/2/2010
  Q: I have two diebolt safe's that need to be moved and wanted to find more information ie: weight, top ...
  A: Keri, Weight is based on the construction of the safe, so two safes that "look" identical to the ...
need combination to safe8/31/2010
  Q: i have a mosler safe serial #2036367 do you know how i can get the combination to safe.
  A: Annie, I would recommend that you contact the manufacturer to find out what the original ...
info on old adesco safe8/31/2010
  Q: My sister in law has an old adesco safe (about 30" sq) which has a combo and key lock. After the ...
  A: Great job Chuck, Generally there are only three reasons why a safe lock will not open, and the ...
info on old adesco safe8/31/2010
  Q: My sister in law has an old adesco safe (about 30" sq) which has a combo and key lock. After the ...
  A: Chuck, There maybe relockers attached to the key lock, so if you elect the DIY approach be careful. ...
globe wernicke steel safe8/31/2010
  Q: .i thought i had a globe wernicke floor safe but not so sure i would like you to see picture of it
  A: Sharon Unfortunately the photo doesn't allow me to zoom into see what you have. In order to rate, ...
Herring & Co. safe8/31/2010
  Q: I have a Herring & Co. safe circu 1871 - Victorian Brothel style, and have lost the combination. It ...
  A: Mike, Holy smoke, a 3/4" hole - someone must have been blind to drill a hole that large! Yes it is ...
Halls Safe & Lock Co HISTORY8/31/2010
  Q: Have just taken possesion of a safe.I would appreciate any info relating to history of safe and ...
  A: Noel, Based on the serial number of your safe, it would have been built between 1882-1884. HALL’S ...
Safe and Fire proof File Cabinet8/30/2010
  Q: Terry The Fire proof Cabinet I have needs the lock redone. Any suggestions where to get it done ...
  A: Nardo, First there is no such thing as a "Fire Proof" cabinet. While some manufacturers did ...
Vanguard VS-75 safe need sequence8/30/2010
  Q: My father has a Vanguard VS-7 safe. We have the combination numbers but we don't remember the ...
  A: Pam, These safes were sold by Sears years ago. I believe they were imported by Center ...
SAFE WON'T OPEN8/29/2010
  Q: OK WE HAVE A DIEBOLD SAFE DOUBLE DOOR LOCK PATENTED IN 1871 WE CAN GET THE COMBINATION TO LOCK IN ...
  A: William, Mechanical problems are "hands on" diagnostics, solutions and repairs. Without having the ...
Consolidated Time Lock Company8/27/2010
  Q: I am wanting to get a safe but lock is gone and I am trying to find another to put in it. It takes a ...
  A: Marvin, I'm not sure what you are asking. If you are looking for the two locks in the photo then ...
Shaw Walker Fire Resistant File Cabinet8/27/2010
  Q: Would you have an estimate of the weight of the file cabinet? It was purchased in the late 50s or ...
  A: Charles, Without knowing what size it is, its kind of hard to guess its weight. A standard two ...
w c ireland co boston ma8/26/2010
  Q: A google search for the above directed me to your site. I came across a large safe while performing ...
  A: Martin, In order to rate, identify, or evaluate your safe I am going to need pictures. Evaluation ...
new lock and key for a saf-d-posit model 9008/26/2010
  Q: Do you have any idea where we could get a new lock and key for a saga international - saf-d-posit ...
  A: Sandra, The reason no one sells parts for these safes, is that they haven't been imported for over ...
X-09CD Lock Issue8/26/2010
  Q: I have an X-09CD lock that is now difficult to spin and there is nothing on the display when you try ...
  A: Ralph, My first recommendation would be to have you contact Kaba's customer service directly. They ...
Lost safe combination8/26/2010
  Q: I lost the combination to my Montgomery Ward model 9001 (serial number 76- 16181) safe. Can you ...
  A: Rick, Based on your serial number this is probably a Meilink safe. You can contact Meilink's ...
Cary Safe8/25/2010
  Q: We have a Cary Safe that has a smaller safe inside it. It was the property originally of the US ...
  A: Ruth, The interior safe is a Jewelers chest. I never recommend using locksmiths as generally they ...
Diebold Safe8/25/2010
  Q: I have a old Diebold Safe with two doors. Lower door has a very long key which I have. Top Door has ...
  A: James, You can try the following company, they should be able to open and repair the safe, recover ...
Safe Combination8/24/2010
  Q: I have a Cinci brand safe that I bought at a store closing a year or so back. It has a Sargent & ...
  A: David, I use a white lithum grease. Silicone grease will work as well, just remember that ALL ...
SQM Safe - reset code8/24/2010
  Q: I have a SQM Safe with an electronic lock (12 digit keypad: 0-9, C, S). I have it open with the key ...
  A: Dan, I'm going to have to see what you have. There are a lot of imported asian safes that come ...
Identify & value antique Cary safe8/24/2010
  Q: I have a fully functional and ornate jewelers or small bank Cary safe. SN# Y31476 34" W x 57" H x ...
  A: Ken, Great looking Cary safe. It is definitly unique. While a number of Cary's had jewelers ...
Safe Combination8/24/2010
  Q: I have a Cinci brand safe that I bought at a store closing a year or so back. It has a Sargent & ...
  A: David, My first caution with this lock and safe is "DO NOT close and lock the safe door until AFTER ...
Can't open my old Mosler Safe8/23/2010
  Q: I have a Mosler Safe from my Father's business (1934) #208903. I took over the business 1968 and ...
  A: Vincent, The dialing sequence should be: 4 times left to the first number, 3 times right to the ...
CSS quicklock II fails to open8/23/2010
  Q: i don't use the safe often but when my wife when to opening it we turned the knob got the lites and ...
  A: Joe, I didn't expect much from CSS. Here is another option for you, call Kaba Mas's customer ...
Victor Patent Safe8/22/2010
  Q: Andy, I have the same safe as Ray. You first asked if the safe were open or closed. Ours is open. ...
  A: Jeffrey, First never assume that you have the same safe as someone else. Manufactures had numerous ...
safe combinatioTaylor 6 ft. door8/22/2010
  Q: The Taylor safe door is 6 ft./ 4 locking bolts (for wine cellar. Door is open and marking on ...
  A: Lletofsky Generally the locks used on Taylor safes were key changeable. As these safes were made ...
Shaw-Walker floor safe8/22/2010
  Q: Can you tell me how old this safe is and it's value and if I can get a second key made for it. It is ...
  A: Richard, SHAW-WALKER SAFES (1903-1990 ) Began in 1903 with the founding of the Shaw-walker ...
cary safe8/21/2010
  Q: I have purchased a safe made by Cary safe co and was curious to more information about the safe. It ...
  A: Andrea, The Cary Safe Company was in business from 1878 to 1929 in Buffalo, NY. In order to ...
new combination for safe8/21/2010
  Q: I'm thinking of buying a used gun safe with a S&G combination lock. It may not be worth buying if ...
  A: Charlie, S&G locks are key changeable locks requiring a special tool. It can easily be done by a ...
York parts8/20/2010
  Q: we have a York fireproof 2 drawer file cabinet that need to be re keyed. I have been told it can not ...
  A: Debbie, The York safe company was acquired by Diebold in 1945, and the factory closed in the late ...
Changing combination to a digital Remington safe8/20/2010
  Q: I just want to change the combination to my Remington Gun safe. It is digital and I have replaced ...
  A: Mike, It will depend on the lock that is installed on your safe. I will need to know the lock ...
old safe8/20/2010
  Q: We have an old DEBolt safe and have a combination written down but do not have the first number. Is ...
  A: Susan, It all depends on the safe technicians available in your area. While the misconception is ...
LSDA safe8/19/2010
  Q: I have a LSDA safe and recently moved. I have lost the combo while moving and my question is.... ...
  A: Rae, These safes are Japanese imports, Unfortunately these safes are imported and relabeled by a ...
old safe8/18/2010
  Q: We have an old DEBolt safe and have a combination written down but do not have the first number. Is ...
  A: Susan, If you have a partial combination, but are missing the first number, you would only need to ...
temington T-8 safe8/18/2010
  Q: i purchased an remington T-8 safe at auction, the key and combination were with it, but have been ...
  A: James, Any safe technician will be able to reset the combination on this safe for you. Check your ...
Sisco Protector Model 1190 Lost Key and Combination8/18/2010
  Q: Duration relocation from University of California San Diego, CA92130 to the University of ...
  A: Anthony, The Company information is: SISCO Inc. 2835 E. Ana Street Rancho Dominguez, California ...
Cole-Steel Cabinet with combo on bottom drawer8/18/2010
  Q: I read your answer about how these cabinets are not really safes and the cost to have one opened. ...
  A: Mendi, You have two options: 1. As the door is open, if you can remove it from the safe - take it ...
Sisco Model 10608/17/2010
  Q: We have this safe & the directions w/numbers to open it with, along with key. We have tried going by ...
  A: Jack, My first recommendation would be to have the "friend" show you how to dial it, if they are ...
Mosler 302 Group 1R Disassembly8/17/2010
  Q: I'm trying to remove a Mosler 302 Group 1R from an old drawer head. There isn't a spline key so I'm ...
  A: Jason, Yes there is a spline key, it just doesn't look like the spline key on other safes. If you ...
Re: Barnes Safe and Lock, Co. Safe Issue8/16/2010
  Q: I have a Barnes Safe and Lock, Co. safe that I can't get open. I know the combination and the ...
  A: Aaron, The lock is probably manufactured by Sargent & Greenleaf. The dialing sequence depends on ...
Sears Roebuck and Co. Tower Safe8/16/2010
  Q: I purchased a Sears Roebuck and Co. Tower Safe at an auction recently and would like to know when it ...
  A: Randy, Sears & Roebucks never made safes - the "Tower" brand safes were simply relabeled safes made ...
OLD SEARS SAFE8/15/2010
  Q: I ALSO HAVE AN OLDER SEARS SAFE CIRCA 1970. I KNOW THE NUMBERS AND WHEN I START WITH LEFT ROTATION I ...
  A: John, There are only three reasons a safe lock will not open: 1. Incorrect combination, 2. ...
Sentry 2260 safe8/14/2010
  Q: My girlfriend has given up on trying to get into a safe she bought at Walmart many years ago. It is ...
  A: John, Well she is only partially right. If her son changed the combination by moving the wheel to ...
Lost combination8/14/2010
  Q: Andreasen, I have a safe, manufactured by the Rocky Mountain Safe Company in Springville, Utah. ...
  A: Jim, On the contrary, I don't mind people like Mr. Blaze making info like this available at all. ...
Sentry 9017 sn# 80311078/14/2010
  Q: fathers safe. we have the combination but do not know how to dial in the numbers. can u help. has ...
  A: Jimmie, to get a copy of the instructions for your safe you can contact Sentry at: ...
saga safe model 18858/13/2010
  Q: i have a safe and the combo, what i need is the order in which to open it. there are four number for ...
  A: Richard, These safes use stamped wheels in the lock. Because of the design you can dial it either ...
Safety Deposit Box key?8/13/2010
  Q: While going through my aunt's old possessions, I found a key that appears to be a safety deposit box ...
  A: Shirley, I would need to see the key to determine if it is a safe deposit box key. I don't have a ...
brinks safe8/11/2010
  Q: I recently lost the only key to my brinks home security fire safe. Model number 5054 sisco. ...
  A: Jeff, Brinks is no longer the label for the Sisco safes, Honeywell is the current model. Honeywell ...
safe value8/11/2010
  Q: I have an Art Metal S-5991 Class A rated safe. It is in my barn. As we are moving, is it worth ...
  A: Fred, Art Metal Company (AMCO) was in business from 1888 to 1950. The majority of the safes they ...
Mosler Safe8/11/2010
  Q: I recently acquired a Mosler cannonball style safe. I was not given the combination. I was wondering ...
  A: Nick, I've estimated the date of manufacture to between 1915-1920 but I'll have to do a little more ...
1910 100 dial Victor Safe (&lock co.)8/11/2010
  Q: We've always kept it open and have used it to hold random front desk items but one of the employees ...
  A: Tom, Victor used a number of different locks, until the mid 1920's most were their own design and ...
Cary walk-in, bank-type safe door system8/11/2010
  Q: Andy,a building my parents owned needed to be torn down, and I removed some salvage and scrap...the ...
  A: Brent, The serial number should be on the handle of the door. I'm not sure what you are referring ...
Mosler Safe8/11/2010
  Q: I recently acquired a Mosler cannonball style safe. I was not given the combination. I was wondering ...
  A: Nick, Well if you would like to have the safe opened without drilling, then you only have three ...
Safe Cabinet Labratory filing cabinet8/9/2010
  Q: We have a four drawer Safe Cabinet Laboratory 4 drawer fireproof filing cabinet. The pull handles ...
  A: Sun Basin Properties, Inc., Unfortunately, Safe Cabinet Laboratory and its parent company ...
star floor safe8/9/2010
  Q: i have a star floor safe and the door pins are frozen ,i have combination but the pins wont retract ...
  A: Tim, Mechanical problems are ALWAYS hands on diagnostics. What I might do and what you might do ...
Diebold safe8/9/2010
  Q: I inherited a Diebold safe. I am guessing it is from sometime in the 1970s. I had the combination ...
  A: Tom, First off, I do not evaluate safes without seeing them, unfortunately everyone thinks that ...
how to open a safe?8/9/2010
  Q: i have a J & J taylor limited toronto safe works safe it seems to be a pretty old but in good ...
  A: Brennan, JJ Taylor used several different locks. The two main dialing sequences are for the four ...
OC-9 lock?8/8/2010
  Q: I have what I believe might be an OC-9 lock on an old Safe Cabinet Co safe. The lock was spun with ...
  A: Bob, This is a hand change lock so no special tools will be necessary to reset the combination. ...
Remington Rand safe file8/7/2010
  Q: We acquired a Remington Rand safe file approx 20 years ago, it works well w/no problems. It weighs ...
  A: Susan, Remington Rand acquired the "Safe Cabinet Company in 1926. They continued to make cabinets ...
vaults & bank safes8/7/2010
  Q: Andy I'm a mover and I provide relocation services to the banking industry in Puerto Rico (US ...
  A: Saul, We use "Big Joe" equipment. I don't know if you have a dealer in Puerto Rico but here is the ...
How to open Armor Safe Corp. floor safe with combination8/6/2010
  Q: Bolted to my floor is an old safe made by Armor Safe Corp. I have contacted them and received the ...
  A: Vlad, The dialing sequence is: 4 times left TO the first number, 3 times right TO the second ...
Gun safe combination lock taken apart.8/5/2010
  Q: The wheels on the inside of the door behind the dial were taken apart to change the combo. Then the ...
  A: Russ you have three options: 1. Contact Sentry's customer service for help at: www.sentrysafe.com ...
STEEL MASTER LOCK8/5/2010
  Q: WE JUST ACQUIRED AN ART STEEL CO SAFE. IT HAS A STEEL MASTER LOCK WITH THE NUMBER XAA-119 STAMPED ...
  A: Carl, Art Steel cabinets are not "safes", while it does have a locking cabinet with a small ...
CSS quiklock 28/3/2010
  Q: I am a manager of a retail store and we have a CSS quiklock 2 and the wiring harness has had the ...
  A: Aaron, I never recommend the use of a locksmith for safe work because the generally don't have the ...
Sentry SAFE COMBINATION8/2/2010
  Q: Ineed to change the combination on my home safe current combo is good just too many people know it ...
  A: Earl, You can get an owners manual for your safe at: ...
cary safe september 16 18908/2/2010
  Q: I recently bought a koa campground and with it came a safe! We do not know the combination, is ...
  A: Ann, Manufacturer's never published records of combinations for obvious security and liability ...
X-088/1/2010
  Q: When attempting to open an x-08 with the 5 times in a row method, is there any trick to this? The ...
  A: Glen, I assume that you are refering to reseting the lock when an SA condition (Sureptious Entry) ...
Vault doors8/1/2010
  Q: I was reading some comments pertaining to vault doors. There are many areas in today's market where ...
  A: John, Wouldn't we all. We get multiple requests every week for older doors. I'm not talking about ...
Victor Firemaster LX Stuck!7/30/2010
  Q: I have a two drawer Victor Firemaster LX with stuck drawers. The lock is "out" and I'm assuming that ...
  A: Jay, Victor quit producing safes and fire files in the mid to late 1950's. The insulation that ...
Safe Information7/29/2010
  Q: I work for a major University located in Riverside, CA. I have a safe a department wants me to ...
  A: Dennis, While the safe still has value it doesn't meet current standards. Safes over 50 years old ...
Shaw Walker Fireproof File Cabinet7/29/2010
  Q: Question is: how do I go about finding out the worth of this safe and who would I contact here in ...
  A: Dawn, Basic history, SHAW-WALKER SAFES (1903-1990 ) Began in 1903 with the founding of the ...
winchester WI-102140 safe7/28/2010
  Q: We have a Winchester Gun safe that my 3yr old grandson was hitting key pad on now it wont open for ...
  A: Cheri, First off, I never, ever, ever recommend the use of a locksmith for safe work. They ...
JJ Taylor floor safe7/27/2010
  Q: I have a JJ Taylor (Toronto Safe Works) floor safe that I lost the combination to. I used to have ...
  A: Rob, There is no such thing as a "try out combination". Combinations are set by the factory one of ...
Victor safe7/27/2010
  Q: I have a Victor safe with a Yale lock. I know the last number to the combination so I have been ...
  A: Charles, Your Yale lock is a hand change lock, this means that no special tools are required to ...
Diebold Safe7/26/2010
  Q: We have "inherited" a Diebold Safe, with the number 148 on the upper left front. The size is 17 ...
  A: Patricia, there are no "tricks" to opening a properly operating combination lock. Generally when ...
Old safe in the house7/26/2010
  Q: I Just bought a new house and there is safe installed in one of the cupboards. Its a safe from armor ...
  A: Mubhij, The original address of the manufacture was: Armor Safe Corporation 2580 Progress Street ...
Key Lock Bank Savings Box7/26/2010
  Q: I recently purchased a small box (flea market) that is a type of "piggy bank" coin box. It is ...
  A: Brigette, I'm sorry I don't work on this type of item. Most locksmiths should be able to open it ...
4 digit combination on our safe7/25/2010
  Q: My husband and I purchased a safe last year and we are having trouble getting it open. Sometimes it ...
  A: Jean, there are only three reasons a safe lock won't open: 1. incorrect combination, 2. incorrect ...
error setting combination7/25/2010
  Q: I recently purchased a small "b" rated money chest with a La Gard group 2 & 1 mechanical lock. I ...
  A: Phillip, This is one of the reasons that I don't recommend owners (or even most locksmiths) change ...
Mystery wall safe - old7/25/2010
  Q: I live in an old New England farm house built just at the turn of the century. When we moved in, we ...
  A: Sarah, In order to identify, evaluate or appraise your safe, I'm going to need photos. They should ...
Victor safe inner box lock7/25/2010
  Q: Andy, I have a Victor safe approx 20x20x30. Inner compartment door is missing a lock mechanism and ...
  A: Dave, Victor safe has been out of business for about 55 years. Unless you find another safe to get ...
Victor Safe & Lock Co combination7/23/2010
  Q: We have an old Victor Safe that we do not have a combination for. I was wondering if the numbers ...
  A: Glenn, Unfortunately, manufactures do not publish copies of their records for obvious security ...
Schwab Safe and Lock Co7/22/2010
  Q: I have inherited an old safe with the name Schwab Safe and Lock Co. United Security Co. of Los ...
  A: Clare, In order to identify, evaluate or appraise your safe, I'm going to need photos. They should ...
Eclipse Safe- don't know how to change battery7/22/2010
  Q: I have an eclipse safe in my store and the handle will not turn after the code is entered. ...
  A: Gia, Most Eclipse safes use LaGard locks for their digital locks. In general you should be able to ...
Open a Mosler Safe7/22/2010
  Q: Hi if you cold give me a hand i resently purchase a Mosler safe it is very OLD i dont have the ...
  A: Marco, Here is a little more info about your safe: MOSLER, BOWEN & COOK - MEXICO George W. Cook ...
Stolen key to a Sentry Safe7/22/2010
  Q: Our Sentry TW8-331 DI safe has a digital combination pad and a backup key. The access key has been ...
  A: Dennise, I would recommend that you contact Sentry Safe to obtain a new lock. Simply replace the ...
opening a sentry safe7/21/2010
  Q: We have a sentry safe with an electronic key pad and key that will no longer open. We changed the ...
  A: Deb, If the lock is not functioning then you will need a safe tech to open your safe. While some ...
Amsec RLT 6040 E7/20/2010
  Q: Are you familiar with the AMSEC model RLT 6040 E? I called Amsec, and they don't have any ...
  A: Darren, I'm not sure who you talked to at AMSEC, but Tech Service should be able to answer your ...
mosler lost combo7/20/2010
  Q: I'm a locksmith and safe tech in new orleans louisiana. FYI Amsec does have access to mosler ...
  A: Julie, After checking with AMSEC here is the scoop. AMSEC did manufacture some safes for Mosler. ...
Disposal of small safe7/20/2010
  Q: I have a small Sentry safe that weights about 90 pounds. I am disposing of it because I no longer ...
  A: Charles, The sentry safes are very prone to moisture problems. Disposal shouldn't be a problem as ...
Old safe won't open with combination7/18/2010
  Q: This safe was turned over while attempting to bring in my house. I fear that it may have some sort ...
  A: Terry, There are only three reasons a safe lock will not open - 1. Incorrect combination, 2. ...
Amsec els20 lock7/17/2010
  Q: i just bought Is there a way in? and replace the old one with new ?
  A: Brian, You've left out a lot of information, so obviously I'm going to have questions - 1. Did ...
tredlok override code7/17/2010
  Q: My uncle passed away and I do have the combination to an old dial lock we have tried with no luck to ...
  A: Deidre, I'm not sure why you are contacting Winchester if you have a treadlok safe, and if the ...
Lost Combination7/17/2010
  Q: I have an Amsec ESL10 with a missing combination what is the cost reset to factory code ?
  A: Jeff, $12 billion dollars - please make the check out to me and send it to . . . . just kidding! ...
Yale safe lock code7/17/2010
  Q: Andy, Let me begin by stating that I am a safe technician, BUT with limited experience opening ...
  A: Richard, If you have limited experience as a safe technician, then you are an apprentice safe ...
Sargent & Greenleaf R6700 combo change7/15/2010
  Q: Andy, Regarding a previous answer you gave: "The Sargent & Greenleaf lock uses a special tool to ...
  A: Matt, Am I a salesman or what? I recommen