| Subject | Date Asked |
|
| eddy current explanation | 9/21/2009 |
Q: your profile is very impressive! I am working in an automation industry. Here we control the ...
A: Chandra, your question appears to relate to the general principles of electromagnetic induction, ...
|
| Key Manufacturign Characteristic Documentation | 6/26/2009 |
Q: We are working to improve our characteristic definitions. A definition that has come up is Key ...
A: Over the past 20 years there has been much discussion, especially in the aerospace industry, about ...
|
| question | 5/3/2009 |
Q: I m electronics and communication engineer , interested in industrial engineer and career there is ...
A: The curriculum looks quite comprehensive. However, I have been retired for several years now, so I ...
|
| boeing model 205 (navy xf5b-1) | 4/12/2009 |
Q: Mr Martin, I'm researching the subject plane for an RC model project. This rather obscure Boeing ...
A: Well, Robert, short of going to the BuAer records in the National Archives or maybe delving into ...
|
| Tolerance improvement | 4/2/2009 |
Q: Hye Joe, I got problem here.... I want to improve a tolerance for the width weld bead on the join ...
A: If I understand everything correctly, you are mainly interested in learning something by using real ...
|
| Tolerance Design of Rolled Form and Welded Parts | 4/2/2009 |
Q: I'm a product design engineering student who currently working on a thesis of designing tolerance of ...
A: When you say "tolerance stack", I presume you mean the stack of 2 or more parts BEFORE they are ...
|
| Tolerance improvement | 4/1/2009 |
Q: Hye Joe, I got problem here.... I want to improve a tolerance for the width weld bead on the join ...
A: When properly used, “Minitab” is wonderful tool. But like many other tools, it can cause a lot of ...
|
| Tolerance Design of Rolled Form and Welded Parts | 3/31/2009 |
Q: I'm a product design engineering student who currently working on a thesis of designing tolerance of ...
A: It’s impossible for me, having never seen your door sash, to give good answers to your questions. ...
|
| upgrading from iso9100:2000 to as9100 | 11/5/2008 |
Q: Martin, I am wondering if you know how you would approach upgrading from ISO9100:2000 to AS9100 ...
A: Any time Laura-- Unfortunately, I've lost contact with the Northrop people I used to know who could ...
|
| upgrading from iso9100:2000 to as9100 | 10/27/2008 |
Q: Martin, I am wondering if you know how you would approach upgrading from ISO9100:2000 to AS9100 ...
A: Sorry to take so long to respond—truth is it just slipped my meager mind. The first thing I’d ...
|
| quality blueprints | 7/30/2008 |
Q: i am applying for a quality position where i work and before i take the test required i've gotten ...
A: Since it looks like your main objective is to pass a test, I'd suggest finding a book on drawing ...
|
| Key Characteristics | 7/1/2008 |
Q: I came across a post where you mentioned interest in key characteristics management. I am working ...
A: John -- Just wanted to let you know--got the link but haven't had time to give it much ...
|
| Traceability | 6/26/2008 |
Q: When I perform a AS9102 FAI to an upper level assembly, I not only obtain the piece part routers and ...
A: I guess it would depend on the situation, Ron. If I understand correctly that you're physically ...
|
| AS 9103 | 5/14/2008 |
Q: Is necessary submitt a Process control Documet prior FAI i mean , I need first a sample after i can ...
A: Great question Abraham! I’ve never come across a situation involving simultaneous FAIR (AS9102) and ...
|
| food safety | 3/24/2008 |
Q: Do you know of any international certification bodies as SGS that observe and audit/certify food ...
A: Sorry Mike, no experience in the food industry except to consume the product. It's always been my ...
|
| AQL standard | 1/7/2008 |
Q: hi i need to know final and inline inspection standerd for a AQL level start from 1.0 to 6.0 thanks ...
A: I'm not sure I understand your question. If you mean what sampling standards are available, the ...
|
| AS9100 8.2.4 | 9/24/2007 |
Q: While preparing for an AS9100 registration audit a question came up concerning paragraph 8.2.4. ...
A: Ah, nothing like being an AS9100 (or D6-82479, or whatever) lawyer! As they say in the NFL, let’s ...
|
| Rail Transportation | 7/19/2007 |
Q: I am an analyst with a business research firm and right now working on a report on Global Rail ...
A: Ajay-- Interesting question! Unfortunately, I have no direct knowledge of the rail industry. If (I ...
|
| Boeing aircraft models | 5/5/2007 |
Q: What is the significance of the numeral 7 in most of their aircraft? eg., 727 737 747, etc.
A: Great question, Tom. Sorry about the delay, but I haven’t had access to my reference sources for a ...
|
| AS9100 & Flight Test | 3/21/2007 |
Q: I wish understand the Key Characteristics concept in AS9103 on Flight Testing focus. The AS9103 ...
A: Sorry for the delay in trying to answer your question. The parameters which are explored in flight ...
|
| spc | 7/16/2006 |
Q: i am running a spc c chart in soldering line in a electronical factory the average number of defect ...
A: The sample size for a "c" chart is always 1--in your case, each board that you inspect. The possible ...
|
| AS9100 Quality Manual | 3/9/2006 |
Q: I hope you can help - this might be more of an AS9100 audit question...We have a relationship table ...
A: Meredith— Unfortunately, you're probably pretty well on target when you suggest that much depends ...
|
| Manufacturing | 10/11/2005 |
Q: Why would a vendor with lower quality standards be selected in lieu of one with higher standards? ...
A: Kevin -- Question 1: Sadly, the cheaper initial price is often the determining factor. What isn't ...
|
| AQL standard | 5/11/2005 |
Q: do u know how we use the AQL standard to make a sampling plane? would you give me an comprehensive ...
A: By "AQL standard", I presume you mean MIL-STD-105 or the commercial equivalent, ANSI/ASQ Z1.4. These ...
|
| PPAP books | 3/18/2005 |
Q: my question is related with "Production Part Approval Procees (PPAP)" from QS9000, we are changing a ...
A: Unfortunately, I have no direct experience with QS9000 and detailed requirements such as those ...
|
| automation | 3/14/2005 |
Q: I have a question that i'm quite interested in and wondering if you can answer me. Can you explain ...
A: Sorry, but your question is one of those "what's the meaning of life?" types. I have virtually no ...
|
| Out sourcing vendor selection via QA | 2/25/2005 |
Q: Martin: I am a 1 man company that is current performing a patent search in order to file a systems ...
A: Bob -- Sorry for the delay, but my real job has been in the way lately! I'm not sure I can help, ...
|
| Out sourcing vendor selection via QA | 2/24/2005 |
Q: Martin: I am a 1 man company that is current performing a patent search in order to file a systems ...
A: Bob, This sounds interesting, but I have no experience with patents and I'm not sure I completely ...
|
| Equipment Reliability Metrics | 6/10/2004 |
Q: Joe, As an allexperts.com expert myself, I appreciate you volunteering your time. I am a member ...
A: First, although I do have a lot of SPC-related experience I'm not a reliability engineer, so this is ...
|
| SIx-Sigma and Innovation | 5/12/2004 |
Q: I am trying to establish if six-sigma leads to increased innovation within an organisation, not only ...
A: There are a couple of issues here, Rob. First, how is "innovation" defined? I've never seen any sort ...
|
| Quality systems | 4/26/2004 |
Q: What is quality assurance,quality control & what's the difference between these two?
A: Depends on who you ask! For current thinking, I suggest you simply put "define quality assurance ...
|
| FMEA's | 5/6/2003 |
Q: Can you tell me the difference between a Product FMEA and a Process FMEA?
A: Good question, Steve, and one that those black-belted Six Sigma ninjas often seem a bit hazy about! ...
|
| Process Mapping | 4/15/2003 |
Q: In regard to Continuous Improvement, one of our customers (Airbus) requires Process Mapping at the ...
A: Sorry Steve, but this one is way to nebulous. Not knowing anything about the exact requirements (if ...
|
| Key Characteristics | 11/11/2002 |
Q: I am looking for a simple, user friendly SPC software package that will help meet aerospace ...
A: Robert -- There are tons out there and I'm by no means familiar with them all. I would NOT ...
|
| AS-9103 | 7/1/2002 |
Q: Is AS-9103 incorporated into Boeing's D6-82479 specification?
A: Other way around, Steve. AS-9103 is a nearly verbatim extract of one section of D6-82479, which may ...
|
| BOM | 3/9/2002 |
Q: Joe, I have been trying to find things on the internet to clear up the follow: To distinguish ...
A: Barry -- I don't know that there's a hard and fast definition of either term. In my experience, the ...
|
