Mechanical Engineering - Job Searching: Technical - Computing/Technology

	AllExperts > Mechanical Engineering
	Search

About Al Hall
(Top Expert on this page)

Expertise
I can answer questions concerning: electric power generation, boilers, turbines, thermodynamic efficiency, heat transfer, fluid dynamics, computer modeling, PEPSE modeling expert I can not answer questions regarding: electricity, generators, circuit analysis, controls, mechanics of materials, structural design, chemistry, and civil engineering

Experience
I have 20 years experience working for electric power generators all over the US, as well as the world. I have taught courses in power plant performance testing, I have written subroutines for the PEPSE software (the Cadillac of the power plant modeling software). I have experience with fluidized bed combustion. I have experience with a variety of projects designing equipment, modifying processes, evaluating equipment life using NDT techniques.

Publications
Presented papers at the performance software users group.

Education/Credentials
Bachelors and Masters Degrees from the University of North Dakota in Grand Forks, North Dakota.

You are here: Experts > Computing/Technology > Job Searching: Technical > Mechanical Engineering

Subject	Date Asked	Expert

carrier in MS	8/7/2009	Masoud Fakhrabadi
Mechanical Engineer	6/22/2009	Masoud Fakhrabadi
high schol project	5/5/2009	Masoud Fakhrabadi
question	5/3/2009	Masoud Fakhrabadi
Mechanical Engineering	9/8/2008	Aroosh Shahbazian
query about automobile engineering	8/24/2008	Masoud Fakhrabadi
E-mail Interview	4/23/2008	Masoud Fakhrabadi
question	4/14/2008	Masoud Fakhrabadi
Straws and paperclips	4/13/2008	Aroosh Shahbazian
mechanic	4/6/2008	Masoud Fakhrabadi
phase diagram	3/2/2008	Masoud Fakhrabadi
If you would please answer these questions i would be very thankful	3/1/2008	Masoud Fakhrabadi
Intake Manifold Analysis	3/1/2008	Masoud Fakhrabadi
drive transmission (shaft and gear fitting)	2/27/2008	Masoud Fakhrabadi
shaft design	2/20/2008	Masoud Fakhrabadi
Engineering	1/29/2008	Masoud Fakhrabadi
toppest student	1/22/2008	Masoud Fakhrabadi
Center of Gravity	12/30/2007	Masoud Fakhrabadi
Strength of Plywood	12/13/2007	Masoud Fakhrabadi
Fluid Mechanics Question	11/18/2007	Pat March
ISO 10012 standard	11/15/2007	Aroosh Shahbazian
Research Questions	10/9/2007	Pat March
physics	10/7/2007	Pat March
propeller fan design	9/12/2007	Pat March
Daily Activities	9/4/2007	Pat March
Check this calculation please	8/1/2007	Pat March
Mounting gears/axles for a project.	7/7/2007	Pat March
Career	6/13/2007	Aroosh Shahbazian
Steam boiler efficiency	6/11/2007	Pat March
Waterwheel	6/1/2007	Pat March
Mechanical Engineer	5/1/2007	Al Hall
science project in engineering	4/25/2007	Pat March
Steam Turbine Exhaust Pressure	4/24/2007	Al Hall
A Career in Mechanical Engineering	3/28/2007	Al Hall
Mechanical Engineering Interview	3/23/2007	Al Hall
Heat transfer(Spray condenser)	3/9/2007	Al Hall
burning smell	2/28/2007	Al Hall
solid fuel heating problems	1/23/2007	Al Hall
stalling	12/28/2006	Pat March
Abaqus CAE	12/20/2006	Aroosh Shahbazian
Mechanical Engineering Interview	12/12/2006	Pat March
need career guidance	12/11/2006	Pat March
engineering software	11/17/2006	Al Hall
water cooling system	11/16/2006	Al Hall
interview	11/6/2006	Al Hall
Calculating Oil Boiler Efficiency	11/2/2006	Pat March
powered cart project	10/31/2006	Pat March
steam trap	10/16/2006	Al Hall
Gear and ball bearing that allow sliding through	10/9/2006	Pat March
mechanical engineer interview	10/5/2006	Al Hall
Mechanical engineer interview	9/28/2006	Al Hall
project	9/28/2006	Pat March
Interview	9/28/2006	Pat March
Turbine exhaust pressure	9/27/2006	Al Hall
Continuous Load on a Rotating Shaft	9/26/2006	Pat March
Hole in C6X10.5 Channel	9/25/2006	Pat March
mechanical engineering	9/23/2006	Al Hall
mechanical engineering	9/23/2006	Pat March
Building with straws	9/12/2006	Pat March
mechanical engineering interview	9/8/2006	Al Hall
dowel rigidity	9/6/2006	Pat March
E-mail interview???	9/5/2006	Al Hall
automotive radiators	8/25/2006	Al Hall
kilowatt-hour consumption	8/23/2006	Al Hall
Gears & Bearings	8/21/2006	Pat March
dx geothermal heatpump	8/17/2006	Al Hall
power plant performance analysis	8/1/2006	Al Hall
Value engineering in Automobiles	7/27/2006	Pat March
lpg	7/13/2006	Al Hall
Consulting engineering	7/10/2006	Al Hall
self powered	7/7/2006	Al Hall
help	6/28/2006	Al Hall
Turbine and hot enviroment	6/10/2006	Al Hall
geothermal loop	6/8/2006	Al Hall
Stress Concentration	5/25/2006	Pat March
Mechanical gears	5/12/2006	Pat March
wetted perimeter	5/12/2006	Al Hall
The future of boiler engineering	5/8/2006	Al Hall
Mechanical Designer vs. Technical Management	5/5/2006	Aroosh Shahbazian
Fluid Dynamics	4/19/2006	Al Hall
Cooling Channel Design	4/4/2006	Al Hall
boiler audit	3/10/2006	Al Hall
Design and manufacturing a safety wheel	3/6/2006	Pat March
New Mechanical Engineer	2/27/2006	Al Hall
electric connections	2/26/2006	Al Hall
repaired floor trusses	2/24/2006	Al Hall
mechanical engineering	2/23/2006	Al Hall
mechanical engineering	2/23/2006	Al Hall
interview from a high school student	2/2/2006	Al Hall
Nothing Technical	1/19/2006	Pat March
mechanical engineering	1/4/2006	Al Hall
civil engineering??	1/4/2006	Al Hall
class 1,2,3 threads	1/2/2006	Pat March
design	1/2/2006	Pat March
Hydraulic pump	1/2/2006	Al Hall
about design and automobile	12/14/2005	Kalyanasundaram R
Heater sizing for a geothermal application	12/5/2005	Al Hall
how to design a new product?	11/21/2005	Kalyanasundaram R
problem with well	11/17/2005	Al Hall
universal joints	10/31/2005	Pat March
about full information of gears	10/24/2005	Pat March
Straw Structure	10/18/2005	Pat March
project	10/1/2005	Al Hall
Mechanical Engineering	9/22/2005	Al Hall
Overcome Pump Prime Limitation	9/16/2005	Kalyanasundaram R
Pointer	8/28/2005	Aroosh Shahbazian
Steam Turbine Exhaust System	8/11/2005	Al Hall
Super car	7/25/2005	Kalyanasundaram R
Super car	7/24/2005	Kalyanasundaram R
Selecting Electrical Motors	7/12/2005	Pat March
rubber, recycling	6/8/2005	Pat March
starting air compressor of diesel generator	5/14/2005	Al Hall
science fair project	4/1/2005	Pat March
engineering materials	3/31/2005	Pat March
in the centrifugal pump : what...	3/25/2005	Al Hall
pressure gauges	3/18/2005	Kalyanasundaram R
power plants	3/12/2005	Al Hall
pressure gauges	3/12/2005	Kalyanasundaram R
hydraulics	3/5/2005	Al Hall
overhead projector	2/22/2005	Kalyanasundaram R
Mechanical Engineering School Project	2/13/2005	Kalyanasundaram R
Science	2/1/2005	Pat March
How would you design my invention	1/21/2005	Kalyanasundaram R
Pump	1/21/2005	Pat March
Query	1/16/2005	Kalyanasundaram R
an egg catcher	1/14/2005	Pat March
an egg catcher	1/14/2005	Kalyanasundaram R
careers	1/14/2005	Aroosh Shahbazian
Trebuchet, Science Fair Projects	1/12/2005	Pat March
heat transfer	1/12/2005	Pat March
electro static generator	1/4/2005	Al Hall
cnc	1/2/2005	Aroosh Shahbazian
cnc programing	12/28/2004	Aroosh Shahbazian
hp required in woodworking table saws	12/24/2004	Pat March
thermal	12/24/2004	Al Hall
hp required in woodworking table saws	12/23/2004	Pat March
Physics in Mechanial Engineering	12/17/2004	Al Hall
oil	11/23/2004	Al Hall
fan blades	11/22/2004	Pat March
Propellers	11/21/2004	Pat March
back pressure in a power plant	10/26/2004	Al Hall
Rigidity & Stiffness	10/25/2004	Kalyanasundaram R
design	10/23/2004	Rick Bolton
mechanics - force analysis on jib of crane	10/4/2004	Al Hall
MECHANICAL ENGINEERING	9/27/2004	Pat March
Blower	9/20/2004	Pat March
straw structures	9/9/2004	Pat March
science fair	9/9/2004	Pat March
Ferris Wheel	9/7/2004	Pat March
Designing Jigs& fixtures	9/4/2004	Rick Bolton
Shaft Deflection	9/3/2004	Pat March
Blower	8/30/2004	Pat March
mechanical engineering design question	8/21/2004	Pat March
Gears	8/7/2004	Pat March
tension	8/2/2004	Rick Bolton
Automatic numbering heads	7/29/2004	Rick Bolton
Steam engine	7/28/2004	Pat March
Automatic numbering heads	7/26/2004	Rick Bolton
Engineering Assitance	6/16/2004	Pat March
Information on the Field of Mechanical Engineering	5/31/2004	David Barnes
I am doing a research project...	5/19/2004	David Barnes
I am doing a research project...	5/19/2004	Pat March
Licensing Liquid Level sensing Technology	4/19/2004	Rick Bolton
fields of mechanic	4/15/2004	Pat March
Robotics	4/14/2004	Rick Bolton
Volumetric Flowrate	4/13/2004	Pat March
user subroutine	4/6/2004	David Barnes
centrifugal pump	3/29/2004	Pat March
abaqus cae	3/17/2004	David Barnes
abaqus cae	3/15/2004	David Barnes
watts per cm converted to watts per inch	3/15/2004	Pat March
ANSYS program	3/10/2004	David Barnes
Help on a project	2/27/2004	David Barnes
Help on a project	2/27/2004	Pat March
Hello, I am a third year...	2/27/2004	Rick Bolton
design	2/16/2004	Rick Bolton
mechanical engineering	2/9/2004	Rick Bolton
Research paper for my son	12/5/2003	Rick Bolton
Science Project	12/4/2003	David Barnes
designing motorized vehicle	11/17/2003	David Barnes
Reciprocating Air Compressors	9/24/2003	T.K.sesha Subramanian
Textile Roll equation...	9/5/2003	David Barnes
Poiseulle and Couette flow	7/15/2003	T.K.sesha Subramanian
Hi, I was wondering if you could answer a few of my Questions	6/8/2003	Pat March
air pressure in a tube	6/4/2003	Pat March
Fatigue behaviour of a shaft	4/17/2003	David Barnes
Mechanical engineering	3/11/2003	Pat March
Material Strength	2/27/2003	Pat March
Career	2/15/2003	Michael Holmberg
ABAQUS/CAE	2/6/2003	David Barnes

Page: Most Recent | 1 | 2 | 3 | 4 | 5 | Oldest

Email this page