	AllExperts > PC hardware--CPU & Motherboard & RAM
	Search

Ask a question about PC hardware--CPU & Motherboard & RAM
Volunteer
Experts of the Month
Expert Login

Awards

About Us
Tell friends
Link to Us
Disclaimer

About Rider
Expertise
With 20 years experience I can answer almost any question about Intel computers ror build, restore, backup, configure, OS problems, Hardware issures. Setup of hardware components, repair, remove and replace. Trouble shooting hardware/driver issues. Qwner of DIY Computer Repair and autor of the DIY Computer Repair E-Book

Experience
I have been a hardware/os tech for over 20 years, I also own a web site for the do it yourselfer with over 170 articles.

Education/Credentials
AAS Electronics Engineering Technology, MCSE, A , HP/IBM/Compaq hardware repair ceritfications
You can visit my site here: DIY Computer Repair or visit my swickie DIY Swickie

You are here: Experts > Computing/Technology > Focus on PC Support > PC hardware--CPU & Motherboard & RAM > overclocking

PC hardware--CPU & Motherboard & RAM - overclocking

Expert: Rider - 2/4/2008

Question
Hi Rider, I have an HP NC6000,Intel Pentium M 725,1.60GHz, 1GB ram, Chipset i855PM.And i was wondering if ican and if so how do i overclock to 2 GHz???

Answer
The only way to overclock a processor/fsb is if the manufacture has the provision build into the BIOS.

With that said another problem you have is this is a laptop and there is no way I know of to increase the cooling capacity of a laptop. In other words the heat sink and fan that are installed by the manufacture is at the maximum size and power.

The only way to increase the speed of your processor is to upgrade it, you will have to go to HP's web site and check on the maximum processor that the motherboard and bios supports. I would be surprised if it was over 1.8 to 2.0 GHz.

Sorry but that is the way laptops are.

HTH

http://www.diy-computer-repair.com/laptop-processors.html

My E-Books:
http://www.diy-computer-repair.com/all-e-books.html

Add to this Answer Ask a Question